单向纤维集束的树脂浸润影响因素

张佐光; 李敏; 孙志杰; 陈亮

单向纤维集束的树脂浸润影响因素

北京航空航天大学材料科学与工程学院北京 100083

基金项目: 国家863基金资助项目(2001AA335020)

详细信息

作者简介:
张佐光 (1952-),男,江西井冈山人,教授, zhangzuog@263.net.

中图分类号: TB 332
计量
- 文章访问数: 2964
- HTML全文浏览量: 155
- PDF下载量: 14
- 被引次数: 0
出版历程
- 收稿日期: 2004-04-28
- 网络出版日期: 2004-10-31

Factors effecting on the wicking of epoxy resin in capillaries of unidirectional fibre bundles

School of Materials Science and Engineering, Beijing University of Aeronautics and Astronautics, Beijing 100083, China

摘要

摘要: 运用自行研制的浸润特性测试系统,研究了环氧树脂对单向纤维集束的浸润行为,分析了纤维体积含量、树脂温度、纤维种类及纤维表面浸润剂等因素对浸润的影响规律.研究表明,增加纤维体积含量、升高树脂温度、去除纤维表面浸润剂均可加快环氧树脂对纤维集束的平均浸润速率.研究结果对指导复合材料成型工艺的合理设计、开发浸润特性表征新方法具有重要的意义.
- 复合材料 /
- 纤维束 /
- 环氧树脂 /
- 浸润 /
- 毛细作用
Abstract: Understanding the wetting behavior of resin in fiber assemblies is critical for predicting and improving the fabrication performance of composites. According to capillary rise method, the wicking flow in unidirectional fiber bundles was characterized through measuring the mass gain in fibers at different time. The effects of many factors on the wicking performance of epoxy resin in unidirectional fiber bundles were investigated, such as the volume fraction of fibers, the type of fibers, the temperature of resins and the sizing on fibers. The experimental data suggest that the wicking velocity of resins could be increased with increasing fiber volume fraction, with enhancing temperature and by removing the sizing on S-2 glass fibers.
- composite materials /
- fiber bundles /
- epoxy resins /
- wetting /
- capillary rise

HTML全文

参考文献(1)

[1] Berglund L A, Kenny J M. Processing science for high performance thermoset composites [J]. SAMPE Journal, 1991, 27:27~37 [2]Mecarthy R, Haines G, Newley R. Polymer composite applications to aerospace equipment [J]. Composite Manufacturing, 1994, 5:83~93 [3]Antonucci V, Giordano M, Nicolais L, et al. Resin flow monitoring in resin film infusion process [J]. Materials Processing Technology, 2003, 1:687~692 [4]Rame E. Interpretation of dynamic contact angles measured by the Wilhelmy plate method [J]. Colloid and Interface Science, 1997, 185:245~256 [5]Gu Y, Li D, Cheng P. A novel contact angle measurement technique by analysis of capillary rise profile around a cylinder [J]. Colloids and Surfaces A, 1997, 122:135~149 [6]Abraham M, Ruben D C. Characterization of porous media by the kinetics of liquid penetration:the vertical capillaries model [J]. Colloids and Interface Science, 1997, 189:299~304 [7]Kamusewitz H, Possart W, Paul D. The relation between Young’s equilibrium contact angle and the hysteresis on rough paraffin wax surface [J]. Colloids and Interface Science, 1999,156:271~279 [8]Krishna M P, Suresh G A. Wicking across a fiber bank [J]. Colloids and Interface Science, 1996, 183:100~110 [9]Thomas L S, Donna G S. Wicking flow in irregular capillaries [J]. Colloids and Interface Science, 2002, 204:239~250 [10] Aranberri-Askargorta I, Lampke T, Bismarck A. Wetting behavior of falx fibers as reinforcement for polypropylene [J]. Colloid and Interface Science, 2003,263:580~589 [11]Amico S, Lekakou C. Mathematical modeling of capillary micro-flow through woven fabrics [J]. Composites Part A, 2000, 31:1331~1344 [12]Isabelle P, Guillaume B, David Q. Imbibition of a fabric [J]. Colloids and Interface Science, 1995, 173:319~327 [13] 陈亮. 纤维集束浸润测试方法与单向浸润特性研究 . 北京:北京航空航天大学材料科学与工程学院,2004 Chen Liang. Measurement and characteristics of the wicking of unidirectional fiber bundles . Beijing:School of Materials Science and Engineering, Beijing University of Aeronautics & Astronautics, 2004(in Chinese)

施引文献

资源附件(0)

访问统计