确定材料概率疲劳曲线的损伤力学方法

白曌宇; 孟宪红; 张行

确定材料概率疲劳曲线的损伤力学方法

1.
北京航空航天大学研究生院, 北京 100083
2. 北京航空航天大学航空科学与工程学院, 北京 100083

详细信息

中图分类号: O 39
计量
- 文章访问数: 3270
- HTML全文浏览量: 178
- PDF下载量: 876
- 被引次数: 0
出版历程
- 收稿日期: 2004-09-21
- 网络出版日期: 2005-09-30

Method of damage mechanics to determine the p-S-N curve of material

1.
School of Postgraduate, Beijing University of Aeronautics and Astronautics, Beijing 100083, China
2. School of Aeronautic Science and Technology, Beijing University of Aeronautics and Astronautics, Beijing 100083, China

摘要

摘要: 飞机结构对可靠度要求很高,因此要获取材料的概率疲劳曲线.概率疲劳曲线试验周期长,费用高.对此,首次通过损伤力学方法,根据获取材料中值疲劳曲线所需数据确定了材料的概率疲劳曲线.结果表明,当存活概率提高时,疲劳强度将明显降低,疲劳寿命将明显缩短.本结论是从金属材料的标准试件的疲劳试验推出的,因而该方法首先适用于金属材料,同时该方法也可推广用于许多新型的复合材料.另外,试验子样愈大,置信度愈高.该方法的价值在于可以采用中值疲劳试验代替概率疲劳试验,显著地节约疲劳机时与试验成本.
- 概率 /
- 疲劳曲线 /
- 损伤力学 /
- 中值疲劳曲线
Abstract: High reliability is required in the structures of aero planes, it is necessary to determine the probability fatigue curves of materials. It is well known that it is very expensive and takes numerous time to obtain probability fatigue curves by fatigue tests. Due to this situation, by means of the method of damage mechanics, for the first time a p-S-N curve can be determined according to its median S-N curve and the corresponding fatigue data. The result shows that the fatigue strength and the fatigue life decrease greatly with the increase of the survival probability. This conclusion was obtained from the fatigue tests of metals, so this method can be used under this condition. However, it can be also extended to some new kinds of composite materials. In addition, it should be indicated that the confidence will be higher with a larger sample. The significance of this method is that median fatigue tests can be used to replace probabilistic fatigue tests in order to draw p-S-N curves. Thus the time and the cost of fatigue tests will be reduced greatly.
- probability /
- fatigue curves /
- damage mechanics /
- median S\

HTML全文

参考文献(1)

[1] Lemaitre J. A course on damage mechanics (springer-verlag)[M] New York, 1992 [2] 张行,赵军.金属构件应用疲劳损伤力学[M] 北京:国防工业出版社,1998 Zhang Xing, Zhao Jun. Applied fatigue damage mechanics of metallic structure members[M] Beijing:Press of National Defense Industry, 1998(in Chinese) [3] Zhang X, Zhao J, Hwang K C. A method of damage mechanics for the prediction of fatigue life . Proceedings of the 3'd Int Conf on Fract and Strength of Solids . Hong Kong, 1997. 433~442 [4] Zhang Xing, Zhao Jun, Zheng Xudong. Method of damage mechanics for prediction of structure member fatigue lives . In:Carpinteri A. Handbook of Fatigue Crack Propagation in Metallic Structures(Vol 1) . Amsterdam:Elsevier Science B V, 1994 [5] 高镇同. 航空金属材料疲劳性能手册[M] 北京:北京航空材料研究所,1981 Gao Zhentong. A handbook on the fatigue behaviors of aerometals[M] Beijing:Beijing Research Institute of Aerometals, 1981(in Chinese)

施引文献

资源附件(0)

访问统计