B-P viscoplastic constitutive modeling of Udimet 720 Li
-
摘要: 针对航空发动机用涡轮盘材料Udimet 720 Li,根据高温单轴实验结果,对其在各种载荷条件下的力学行为,开展了采用Bodner-Partom(B-P)统一型弹-粘塑性本构方程进行建模的研究.充分讨论了基于内变量理论的该型本构模型对率相关拉伸、循环硬化及蠕变等力学行为同时进行建模的能力;根据对模型的本构分析,给出了一种分类加整体考虑的模型参数优化策略.通过ABAQUS用户子程序,把该模型结合进了有限元方法,并进行了计算验证.研究表明B-P本构模型可较好地建模高温镍基合金Udimet 720 Li的各种力学行为.Abstract: Udimet 720 Li is a Ni-based superalloy used for aeroengine disc. Based on the uniaxial tensile, cyclic loading and creep experiments results at 650℃, the Bodner-Partom unified viscoplastic constitutive theory was applied to model the mechanical behaviors of the material under three different loading conditions. After detailed analysis of constitutive characteristics of B-P model, a global optimized strategy for model parameters was given in order to simulate tensile, cyclic and creep curves simultaneously. The B-P model was implemented in ABAQUS soft ware through UMAT subroutine using a self-adaptive time stepping strategy. The results shows that B-P model is able to describe such kinds of mechanical behaviors, but it needs to be modified to model fast isotropic softening and ratchetting.
-
Key words:
- viscoplasticity /
- constitutive relation /
- superalloy
-
[1] Bodner S R, Partom Y. A large deformation elastic-viscoplastic analysis of a thick-walled spherical shell[J] ASME Journal of Applied Mechanics, 1972, 39(9):751~757 [2] Bodner S R, Partom Y. Contitutive equations for elastic-viscoplastic strain hardening materials[J] ASME Journal of Applied Mechanics, 1975, 42(6):385~389 [3] Bodner S R, Partom Y, Partom I. Uniaxial cyclic loading of elastic-viscoplastic materials[J] ASME Journal of Applied Mechanics, 1979, 46(12):805~810 [4] Walker K P. Research and development program for non-linear structural modeling with advanced time-temperature dependent constitutive relationships . NASA CR-165553, 1981 [5] Chaboche J L. Constitutive equations for cyclic plasticity and cyclic viscoplasticity[J] International Journal of Plasticity, 1989, 5:247~302 [6] Ohno N,Wang J D. Transformation of a nonlinear kinematic hardening rule to a multisurface form under isothermal and nonisothermal conditions[J] International Journal of Plasticity, 1991, 7:879~891 [7] Rowley M A, Thornton E A. Constitutive modeling of the visco-plastic response of hastelloy-X and aluminum alloy 8009[J] ASME Journal of Engineering Materials and Technology, 1996, 118(1):19~27 [8] 宋迎东,王 舸,高德平.一种弹-粘塑性本构模型材料常数的估计方法[J] 体力学学报,2000,21(2):152~156 Song Yingdong, Wang Ge, Gao Deping. Material constants estimation method of an elastic-viscoplastic constitutive model[J] Acta Mechanica Solida Sinica, 2000,21(2):152~156(in Chinese) -
点击查看大图
计量
- 文章访问数: 3237
- HTML全文浏览量: 108
- PDF下载量: 1049
- 被引次数: 0
下载:
