Method to Ｇet the Forward Solution of a 6-SPS Parallel Manipulator Based on Position Tracking Principle
-
摘要: 以6-SPS并联机构为例,基于路径跟踪原理,提出一种求解并联机构位置正解的预估-校正法.该方法通过求解并联机构位姿方程的微分初值问题,经过路径跟踪,可求出指定杆长动平台的正确位姿,并可求出从初值到待求值的中间结果.仿真结果表明,该方法具有计算速度快,收敛范围大,计算结果可靠的特点.Abstract: A predictor-corrector method to get the forward solution of a 6-SPS parallel manipulator was presented based on the principle of position tracking. By solving the initial value problem of the positional differential equation of the parallel manipulator, not only the position of platform can be determined when the lengths of six legs were specified, but also the transition positions between the two specified leg lengths can be determined. Effectiveness and speediness of the proposed method was demonstrated by simulation results.
-
[1]黄 真,孔令富,方跃法著. 并联机器人机构学理论及控制[M]. 北京:机械工业出版社,1997. [2]Yang J , Jason Z. Closed form forward kinematics solution to a class of hexapod robots[J]. IEEE Transactions on Robotics and Automation, 1998, 14(3): 503~509. [3]Griffis M , Duffy J. A forward displacement analysis of a class of stewart platforms[J]. J of Robotic Systems, 1989, 6(6):703~710. [4]Wen F, Liang C. Displacement analysis of the 6-6 stewart platform mechanisms[J]. Mech, Mach, Theory, 1994, 29(4):547~552. [5]黄玉珍,傅光伟,姜学谦,等. 一类并联机构的正解计算[J]. 中国机械工程, 1999, 10(10):1124~1125. [6]文福安,梁崇高,廖启征. 并联机器人机构位置正解[J]. 中国机械工程, 1999, 10(9):1011~1013. [7]姜 虹,贾 嵘,董洪志,等. 六自由度并联机器人位置正解的数值解法[J]. 上海交通大学学报, 2000, 34(3):347~349. [8]赵新华,彭商贤,张伟军,等. 一种分析并联机器人位置正解的高效算法[J]. 天津大学学报, 2000, 33(2):134~136. [9]熊有伦著. 机器人学[M]. 北京:机械工业出版社, 1993. [10]丁丽娟编著. 数值计算方法[M]. 北京:北京理工大学出版社, 1997. [11]黄 田,汪劲松. Stewart并联机器人局部灵活度与各向同性条件解析[J]. 机械工程学报, 1999, 35(5):41~44. -
点击查看大图
计量
- 文章访问数: 2827
- HTML全文浏览量: 150
- PDF下载量: 1032
- 被引次数: 0
下载:
