轴压开口圆柱薄壳屈曲分析与试验

张展智; 赵国伟; 黄海; 黄承静

轴压开口圆柱薄壳屈曲分析与试验

北京航空航天大学宇航学院, 北京 100191

详细信息

中图分类号: V 414.3; O 343.9
计量
- 文章访问数: 3165
- HTML全文浏览量: 151
- PDF下载量: 477
- 被引次数: 0
出版历程
- 收稿日期: 2010-12-18
- 网络出版日期: 2012-04-30

Buckling analysis and experiment of open cylindrical thin shells under axial load

School of Astronautics, Beijing University of Aeronautics and Astronautics, Beijing 100191, China

摘要

摘要: 开口圆柱薄壳结构的轴向承载能力和稳定性分析是空间薄壁管式伸展机构(STEM,Storable Tubular Extendable Member)设计的关键问题之一.基于特征值屈曲分析方法,研究了轴压铍青铜开口圆柱薄壳结构在两端固支条件下的屈曲载荷与设计参数间的关系,利用幂函数拟合的方法建立了一种轴压开口圆柱薄壳屈曲载荷模型.通过铍青铜开口圆柱薄壳轴向压缩试验对特征值屈曲分析和所建立的轴压开口圆柱薄壳屈曲载荷模型进行了验证.结果表明:特征值屈曲分析方法可用于各向同性材料开口圆柱薄壳结构在两端固支条件下的轴向承载能力与稳定性分析;使用轴压开口圆柱薄壳屈曲载荷模型计算各向同性材料的开口圆柱薄壳在两端固支条件下受轴压作用时的屈曲载荷,最大误差为21%.
- 开口圆柱壳 /
- 屈曲 /
- 特征值 /
- 建模 /
- 试验
Abstract: The axial load-bearing capacity and stability of open cylindrical thin shells is a key point in the mechanism design of storable tubular extendable member (STEM). Based on eigenvalue buckling analysis, the relationship between the buckling loads and the design parameters of open cylindrical thin QBe2 shells with two ends clamped was studied. And a buckling load model was built by the power functions fitting method. To validate the eigenvalue buckling analysis method and the buckling load model, axial compression experiments of open cylindrical thin shells made from QBe2 were conducted. The experimental results indicate that: the eigenvalue buckling analysis method can be used to analyze the axial load-bearing capacity and stability of open cylindrical thin shells of isotropic material with two ends clamped; the maximum error of the buckling load model is 21% in calculating the buckling loads of axially loaded open cylindrical thin shells of isotropic material with two ends clamped.
- open cylindrical shells /
- buckling /
- eigenvalue /
- model building /
- experiments

HTML全文

参考文献(15)

[1]	Pellegrino S.Large retractable appendages in spacecraft[J].Journal of Spacecraft and Rockets,1995,32(6):1006-1014
[2]	陈烈民.航天器结构与机构[M].北京:中国科学技术出版社,2005:312-321 Chen Liemin.Spacecraft structures and mechanisms[M].Beijing:China Science and Technology Press,2005:312-321(in Chinese)
[3]	Higuchi K,Ishimura K.A survey of space structures research in Japan. AIAA-2009-2387,2009
[4]	杜启端.现代薄壳非线性稳定性理论的发展和应用[J].强度与环境,2002,29(1):41-51 Du Qiduan.Advance and application for the modern nonlinear stability theory of the thin shell [J].Structure & Environment Engineering,2002,29(1):41-51(in Chinese)
[5]	Karman T V,Tsien H.The buckling of thin cylindrical shells under axial compression [J].Journal of the Aeronautical Sciences,1941,8(8):303-312
[6]	Donnell L H,Wan C C.Effect of imperfections on buckling of thin cylinders and columns under axial compression [J].Journal of Applied Mechanics,1950,17(1):73-83
[7]	Koiter W T.On the stability of elastic equilibrium. Delft:Department of Mechanics,Shipbuilding,and Airplane Building,Delft University of Technology,1945(in Dutch with English summary)
[8]	沈惠申,陈铁云.圆柱薄壳在外压作用下屈曲的边界层理论[J].应用数学和力学,1988,9(6):515-528 Shen Huishen,Chen Tieyun.A boundary layer theory for the buckling of thin cylindrical shells under external pressure[J].Applied Mathematics and Mechanics,1988,9(6):515-528(in Chinese)
[9]	Chu K H,Krishnamoorthy G.Buckling of open cylindrical shells [J].Journal of the Engineering Mechanics Division,1967,93(2):177-205
[10]	Chu K H,Turula P.Buckling of open cylindrical shells under axial load [J].Journal of the Engineering Mechanics Division,1970,96(6):1143-1156
[11]	Yang T H,Guralnick S A.Buckling of axially loaded open shells [J].Journal of the Engineering Mechanics Division,1976,102(2):199-211
[12]	Silver M J,Warren P,Hinkle J D,et al.Buckling of curved shells with free edges under multi-axis loading. AIAA-2006-2100,2006
[13]	Magnucka-Blandzi E,Magnucki K.Elastic buckling of an axially compressed open circular cylindrical shell [J].Proc Appl Math Mech,2004,4(1):546-547
[14]	Magnucki K,Mać kiewicz M.Elastic buckling of an axially compressed cylindrical panel with three edges simply supported and one edge free[J].Thin-Walled Structures,2006,44(4):387-392
[15]	Wilde R,Zawodny P,Magnucki K.Critical state of an axially compressed cylindrical panel with three edges simply supported and one edge free[J].Thin-Walled Structures,2007,45(10-11):955-959