支柱截面随机度对开孔Voronoi泡沫 弹性性能的影响

卢子兴; 王建月

支柱截面随机度对开孔Voronoi泡沫弹性性能的影响

北京航空航天大学航空科学与工程学院, 北京 100191

基金项目: 国家自然科学基金资助项目(10572013); 北京市教育委员会共建项目建设计划资助项目(XK100060522)

详细信息

作者简介:
卢子兴(1960-),男,河北枣强人,教授,luzixing@buaa.edu.cn.

中图分类号: V 214
计量
- 文章访问数: 2922
- HTML全文浏览量: 129
- PDF下载量: 905
- 被引次数: 0
出版历程
- 收稿日期: 2008-06-23
- 网络出版日期: 2009-08-31

Effects of randomicity for strut cross-sectional areas on elastic properties of Voronoi open-cell foams

School of Aeronautic Science and Engineering, Beijing University of Aeronautics and Astronautics, Beijing 100191, China

摘要

摘要: 基于Voronoi随机泡沫模型,引入支柱截面面积不均匀分布的随机变量,研究了其对泡沫材料的非线性压缩和拉伸行为以及各向异性弹性性能的影响,并与模型随机度的影响进行比较,讨论了两种随机因素共同作用时的影响效果.结果表明,对非线性压缩和拉伸行为,支柱截面随机度对无量纲应力都起降低作用,并且其影响随应变的增加而增大,对泊松比在压缩时起减小作用而在拉伸时起增大作用;支柱截面随机度对胞体伸长方向和垂直于胞体伸长方向的弹性模量均起减小作用,但对泊松比的影响不明显.两种随机因素共同作用的影响效果在拉伸时减弱,而在各向异性弹性情况下增强.
- 泡沫材料 /
- 力学性能 /
- Voronoi模型 /
- 支柱截面随机度
Abstract: Based on Voronoi random foam model, the random distribution of strut cross-sectional areas(SCSAs) was introduced, and its effects on nonlinear compressive and tensile behavior and anisotropic elastic properties were investigated. Influences of the model irregularity and randomicity of SCSAs on foams were compared, and the effects of their interaction were also discussed. The simulation results indicate that, the dimensionless stress decrease as SCSAs get less uniform under compression and tension, and this effect becomes more apparent as strain becomes larger. However, as randomicity of SCSAs increases the poisson-s ratios become smaller under compression while become larger under tension.The relative anisotropic elastic moduli in the elongated direction and perpendicular direction decrease as random degree of SCSAs increases, however, the influence on Poisson-s ratio is insignificant. The effect of the interaction between the two random factors appears to be weak under tension, but strong on anisotropic elastic properties.
- foams /
- mechanical properties /
- Voronoi model /
- randomicity of SCSAs

HTML全文

参考文献(1)

[1] 卢子兴,石上路.低密度开孔泡沫材料力学模型的理论研究进展[J].力学与实践,2005,27(5):13-20 Lu Zixing, Shi Shanglu. Theoretical studies on mechanical models of low density foam[J]. Mechanics in Engineering, 2005, 27 (5):13-20(in Chinese) [2] Gibson L J, Ashby M F. Cellular solids: structure and properties [M]. second edition. Cambridge: Cambridge University Press, 1997:103-108 [3] Zhu H X, Knott J F, Mills N J. Analysis of the elastic properties of open-cell foams with tetrakaidecahedral cells [J]. Journal of the Mechanics and Physics of Solids, 1997,45(3):319-343 [4] Van der Burg M W D, Shulmeister V, Van der Geissen E, et al. On the linear elastic properties of regular and random open-cell foams models[J]. Journal of Ceuular Plastic, 1997, 33(1):31-54 [5] Zhu H X, Hobdell J R, Windle A H. Effect of cell irregularity on the elastic properties of open-cell foams[J]. Acta Materialia, 2000, 48(20):4893-4900 [6] Zhu H X, Windle A H. Effects of cell irregularity on the high strain compression of open-cell foams[J].Acta Materialia,2002, 50(5):1041-1052 [7] Zhang Jialei, Lu Zixing. Numerical modeling of the compression process of elastic open-cell foams[J]. Chinese Journal of Aeronautics, 2007,20(3):215-222 [8] 卢子兴,张家雷,王嵩.各向异性随机泡沫模型的弹性性能分析[J].北京航空航天大学学报,2006,32(12): 1468-1471 Lu Zixing, Zhang Jialei, Wang Song. Investigation into elastic properties of anisotropic random foam model[J]. Journal of Beijing University of Aeronautics and Astronautics, 2006,32(12): 1468-1471(in Chinese) [9] 卢子兴,陈鑫,张家雷.各向异性弹性开孔泡沫压缩行为的数值模拟[J].北京航空航天大学学报,2008,34(5):564-567 Lu Zixing, Chen Xin, Zhang Jialei. Numerical modeling of high strain compression of anisotropic elastic open-cell foams[J]. Journal of Beijing University of Aeronautics and Astronautics, 2008,34(5): 564-567 (in Chinese) [10] Li K,Gao X L,Subhash G. Effects of cell shape and strut cross-sectional area variations on the elastic properties of three-dimensional open-cell foams[J]. Journal of the Mechanics and Physics of Solids, 2006, 54(5): 783-806 [11] 张家雷. 泡沫材料微结构模型和力学性能的研究 . 北京:北京航空航天大学航空科学与工程学院,2007 Zhang Jialei. Investigation into the microstructure model and the mechanical properties of foams . Beijing: School of Aeronautic Science and Engineering, Beijing University of Aeronautics and Astronautics, 2007(in Chinese)

施引文献

资源附件(0)

访问统计