留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

环氧树脂电子束固化微观结构及其影响因素

李玉彬 张佐光 孙志杰 杨嘉陵

李玉彬, 张佐光, 孙志杰, 等 . 环氧树脂电子束固化微观结构及其影响因素[J]. 北京航空航天大学学报, 2007, 33(08): 986-990.
引用本文: 李玉彬, 张佐光, 孙志杰, 等 . 环氧树脂电子束固化微观结构及其影响因素[J]. 北京航空航天大学学报, 2007, 33(08): 986-990.
Li Yubin, Zhang Zuoguang, Sun Zhijie, et al. Microstructure and affecting factors of epoxy resin cured by electron beam radiation[J]. Journal of Beijing University of Aeronautics and Astronautics, 2007, 33(08): 986-990. (in Chinese)
Citation: Li Yubin, Zhang Zuoguang, Sun Zhijie, et al. Microstructure and affecting factors of epoxy resin cured by electron beam radiation[J]. Journal of Beijing University of Aeronautics and Astronautics, 2007, 33(08): 986-990. (in Chinese)

环氧树脂电子束固化微观结构及其影响因素

基金项目: 国家自然科学基金资助项目(59833110); 国家863资助项目(2001AA335020)
详细信息
    作者简介:

    李玉彬(1975-),女,四川泸州人,北京航空航天大学航空科学与工程学院博士后,yubinlee@buaa.edu.cn.

  • 中图分类号: TB 332

Microstructure and affecting factors of epoxy resin cured by electron beam radiation

  • 摘要: 采用扫描电镜对不同固化时间下电子束固化环氧树脂的微观结构进行观察和分析,探讨其形成过程,并研究了树脂分子结构、相对分子质量、树脂体系组分及辐射条件对微观结构的影响. 实验结果表明,环氧树脂经电子束固化后形成片层结构,树脂分子结构和分子量对其固化微结构的影响不大;不同结构、分子量的环氧树脂电子束固化过程中均会经历预聚体结构—圆片网络—圆片形成—圆片增长的生长过程,故其微观结构都呈现圆片状形貌;随着辐射剂量的增加,圆片逐渐增大;存在最佳引发剂用量,使圆片尺寸达到最小.

     

  • [1] Crivello J V. Advanced curing technologies using photo-and electron beam induced cationic polymerization [J]. Radiation Physics and Chemistry, 2002, 63:21-27 [2] Zsigmond B, Halasz L, Czvikovszky T. Electron beam processing of carbon fibre reinforced braided composites [J]. Radiation Physics and Chemistry, 2003, 67(3/4):441-445 [3] 隋刚, 张佐光, 李敏, 等. 电子束固化环氧树脂的引发和增长反应速率 [J]. 北京航空航天大学学报, 2003, 29(8):682-685 Sui Gang, Zhang Zuoguang, Li Min, et al. Rate of initiation and propagation in electron beam curing of epoxy resins [J]. Journal of Beijing University of Aeronautics and Astronautics, 2003, 29(8):682-685 (in Chinese) [4] Chappas W J, Devney B G, Olding R P, et al. EB curing of maritime composite structures [J]. Radiation Physics and Chemistry, 1999, 56(4):417-427 [5] Lopata V J. The manufacturing and repair of high performance composites using electron beam curing [J]. Materials Technology, 1999, 14(2):63-70 [6] Lioudmila G B, Catherine A B, Alexander N B, et al. Optimized electron beam curable aerospace adhesives International SAMPE Technical Conference. Covina, CA:Society for the Advancement of Material and Process Engineering, 2003:1981-1992 [7] Vastava R B. An assessment of e-beam technology for aircraft applications Proceedings of the 43rd International SAMPE Conference. Covina, CA:Society for the Advancement of Material and Process Engineering, 1998:1681-1690 [8] Parrot P. Electron beam curing at aerospatiale Proceedings of the 44th International SAMPE Symposium. Covina, CA:Society for the Advancement of Material and Process Engineering, 1999:1354-1358 [9] Saunders C, Lopata V, Barnard J, et al. Electron beam curing:taking good ideas to the manufacturing floor [J]. Radiation Physics and Chemistry, 2000, 57:441-445 [10] Berejka A J, Eberle C. Electron beam curing of composites in North America [J]. Radiation Physics and Chemistry, 2002, 63(3-6):551-556 [11] Boursereau F, Dupillier J M, Larnac G, et al. Advanced electron beam composites and modeling approach for spacecraft and transportation applications International SAMPE Symposium and Exhibition. Covina, CA:Society for the Advancement of Material and Process Engineering, 2000, 45:2235-2245 [12] Foedinger R, Schneider T, Grande R, et al. Development of electron beam curable composite motor cases International SAMPE Symposium and Exhibition. Covina, CA:Society for the Advancement of Material and Process Engineering, 2002, 47:570-584 [13] Lopata V J, Sidwell D R, Idgeon F E, et al. Preliminary test results for a type-trial repair on air Canada airbus aircraft fleet Proceedings of the 43rd International SAMPE Conference. Covina, CA:Society for the Advancement of Material and Process Engineering, 1998:1672-1680 [14] 隋刚,张佐光,袁宇慧,等. 增强纤维对环氧树脂基体电子束固化特征的影响研究 [J]. 复合材料学报, 2003, 20(2):1-6 Sui Gang, Zhang Zuoguang, Yuan Yuhui, et al. Study on effect of reinforce fiber on characteristic of electron beam curing in epoxy resin matrix [J]. Acta Materiae Compositae Sinica, 2003, 20(2):1-6 (in Chinese) [15] 刘玉文, 张志谦, 黄玉东, 等. 电子束固化复合材料界面 [J]. 复合材料学报, 2002, 19(3):16-20 Liu Yuwen, Zhang Zhiqian, Huang Yudong, et al. Interface of electron beam cured carbon fiber reinforced composites [J]. Acta Materiae Compositae Sinica, 2002, 19(3):16-20 (in Chinese)
  • 加载中
计量
  • 文章访问数:  3553
  • HTML全文浏览量:  155
  • PDF下载量:  1116
  • 被引次数: 0
出版历程
  • 收稿日期:  2006-10-20
  • 网络出版日期:  2007-08-31

目录

    /

    返回文章
    返回
    常见问答