Measurement arithmetic based on linear interpolation and equivalent transducer in aircraft fuel quantity gaging
-
摘要: 以某型号飞机的机身油箱为例,提出了等效虚拟传感器的方法,将多根传感器测量值所确定的燃油面,用油箱中某个特殊位置的一虚拟传感器的值等效表示.建立虚拟传感器长度、飞机姿态中俯仰角和横滚角与燃油体积关系的三维数据表,利用插值的方法得到燃油量的近似值.利用Solidworks三维辅助设计软件对运用等效原理和插值法得到的燃油量进行验证,结果表明该方法测量精度高,计算结果可靠.而且等效原理的利用,使插值法涉及的数据量大大减少,达到了压缩数据的目的,便于在实际系统中的实现.Abstract: A measurement arithmetic based on virtual equivalent sensor and linear interpolation was presented, which was applied to aircraft fuel quantity gaging. The aircraft fuel surface which was defined by more than three fuel sensor′s measurement value could be also expressed with one virtual equivalent sensor located in special situation in the fuel tank. In this equivalent principle, fuel quantity could be acquired having three-dimensional linear interpolation through the three-dimensional data stable showing the relation between fuel quantity and the virtual equivalent sensor, aircraft attitude information. Effectiveness and precise of the proposed method were demonstrated by simulation results adopting Solidworks software. The results show that the measurement arithmetic is stable, reliable and effective. Because of the application of the equivalent sensor, data quantity in three-dimensional table is greatly compressed, which makes the interpolation method easy to be realized in actual aircraft fuel quantity gaging system.
-
Key words:
- aircraft fuels /
- fuel gages /
- transducer /
- interpolation
-
[1] 肖凝. 飞机燃油测量技术研究与发展[J]. 航空科学技术,2003(3):31-34 Xiao Ning. Research and development of the aircraft fuel measurement technology[J]. Journal of Aeronautics Technology and Science, 2003(3):31-34(in Chinese) [2] 李占国. 未来飞机燃油系统设计与仿真技术[J].航空科学技术,1996(3):23-26 Li Zhanguo. Design and simulation of future aircraft fuel system[J]. Journal of Aeronautics Technology and Science, 1996(3):23-26(in Chinese) [3] 关丽, 陈行禄. 用多维查表法解决飞机燃油油量测量的数据处理问题[J]. 测控技术,1997,16(1):41-43 Guan Li, Chen Xinglu. A method for the data process in fuel quantity gaging on aircraft by multidimensional table look-up technique[J]. Measurement and Control Technology, 1997, 16(1):41-43(in Chinese) [4] 袁梅,吴昊,张建. 采用CAD技术对飞机燃油测量进行姿态误差修正[J]. 北京航空航天大学学报, 2002, 28 (1):119-121 Yuan Mei, Wu Hao, Zhang Jian. Fuel measurement with attitude error correction by using CAD technique[J]. Journal of Beijing University of Aeronautics and Astronautics, 2002, 28 (1):119-121(in Chinese) [5] 李启炎,李光耀. Solidworks 2003三维设计教程[M]. 北京:机械工业出版社, 2003 Li Qiyan, Li Guangyao. Solidworks 2003 three dimensional design[M].Beijing:Machine Industry Press, 2003(in Chinese) -
点击查看大图
计量
- 文章访问数: 3149
- HTML全文浏览量: 178
- PDF下载量: 905
- 被引次数: 0
下载:
