留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

多点切触加工中的局部干涉分析

王瑞秋 陈五一 金曼

王瑞秋, 陈五一, 金曼等 . 多点切触加工中的局部干涉分析[J]. 北京航空航天大学学报, 2006, 32(05): 580-584.
引用本文: 王瑞秋, 陈五一, 金曼等 . 多点切触加工中的局部干涉分析[J]. 北京航空航天大学学报, 2006, 32(05): 580-584.
Wang Ruiqiu, Chen Wuyi, Jin Manet al. Local interference identification of multi-point machining[J]. Journal of Beijing University of Aeronautics and Astronautics, 2006, 32(05): 580-584. (in Chinese)
Citation: Wang Ruiqiu, Chen Wuyi, Jin Manet al. Local interference identification of multi-point machining[J]. Journal of Beijing University of Aeronautics and Astronautics, 2006, 32(05): 580-584. (in Chinese)

多点切触加工中的局部干涉分析

基金项目: 中国航空第一集团创新基金项目(CX03007)
详细信息
    作者简介:

    王瑞秋(1981-),男,安徽淮北人,博士生, wrq work@126.com.

  • 中图分类号: TP 391

Local interference identification of multi-point machining

  • 摘要: 为了消除多点切触加工刀位计算的局部干涉,通过对中凹端铣刀和工件曲面之间的几何接触状况分析,得到了多点切触加工算法的局部干涉判别条件.利用微分几何得到了多点切触加工刀位中刀具和工件的交线在第一切触点处的曲率半径和刀具曲率半径的比值,结合局部干涉判别条件,得到无干涉的多点切触加工约束的解区域.结果表明无论曲面为何种样式,必须选择第二切触点在曲率较大的主方向附近的解区域中,再使用多点切触加工算法算出的刀位,才有可能不发生过切现象.

     

  • [1] Warkentin A, Ismail F, Bedi S. Multi-point tool positioning strategy for 5-axis machining of sculptured surfaces [J]. Computer Aid Geometric Design, 2000,17(1):83-100 [2] Max Engeli, Jorg Waldvogel, Thomas Schnider. Method for processing work pieces by removing material . United States Patent:US 6,485,236, 2002-11-26 [3] Wang Ruiqiu,Chen Wuyi.Application of the Hermite method on pool path generation Chen Wuyi,Yamane Yasuo,Fan Rui, et al.Proceedings of the Seventh International Conference on Progress of Machining Technology.Beijing:Aviation Industry Press,2004 [4] Wang X C, Li Y B, Chosh S K, et al. Curvature catering—a new approach in manufacturing of sculptured surface (part 2.methodolody) [J]. Journal of Materials Processing Technology, 1993, 38:177-194 [5] Wang R Q, Chen W Y, Jin M, et al. Analyses on the solution areas of multi-point machining constraints[J]. Key Engineering Materials, 2006,315-316:309-313 [6] 梅向明,黄敬之. 微分几何[M]. 北京:高等教育出版社,1988:138-141 Mei Xiangming, Huang Jingzhi. Differential geometry[M]. Beijing:Advanced Education Press, 1998:138-141(in Chinese) [7] Gray P, Bedi S, Ismail F. Rolling ball method for 5-axis surface machining [J]. Computer-Aided Design, 2003, 35(4):347-357
  • 加载中
计量
  • 文章访问数:  2828
  • HTML全文浏览量:  128
  • PDF下载量:  808
  • 被引次数: 0
出版历程
  • 收稿日期:  2005-05-27
  • 网络出版日期:  2006-05-31

目录

    /

    返回文章
    返回
    常见问答