Citation: | Li Jian, Lee Chun-Hian, Jia Liping, et al. Numerical simulation on influencing parameter of micro-blowing technique[J]. Journal of Beijing University of Aeronautics and Astronautics, 2010, 36(2): 218-222. (in Chinese) |
[1] Hwang D P.Review of research into the concept of the microblowing technique for turbulent skin friction reduction[J].Progress in Aerospace Sciences,2004,40(8): 559-575 [2] Thiede P.Supercritical airfoil flow control by slot suction in shock region .AFFDL-TR-80-3088,1980 [3] Bahi L,Ross J M,Nagamatsu H T.Passive shock wave/boundary layer control for transonic airfoil drag reduction .AIAA-83-0137,1983 [4] Wood R M.Aerodynamic drag and drag reduction: energy and energy savings .AIAA-2003-209,2003 [5] Dershin H,Gallaher W H,Leonard C A.Direct measurement of skin friction on a porous flat plate with mass injection[J].AIAA Journal,1967,5(11):1934-1939 [6] Lin Y L,Chyu M K,Shih T I P,et al.Skin friction reduction through micro blowing .AIAA-98-0359,1998 [7] Hwang D P.Skin friction reduction by micro blowing technique:U S,5803410 ,1998-09-08 [8] Hwang D P.A proof of concept experiment for reducing skin friction by using a micro blowing technique .AIAA-97-0546,1997 [9] Hwang D P,Biesiadny T J.Experimental evaluation of the penalty associated with micro-blowing for reducing skin friction .AIAA-98-0677,1998 [10] Hwang D P.Skin-friction reduction by a micro-blowing technique [J].AIAA Journal,1998,36(3):480-481 [11] Hwang D P.An experimental study of turbulent skin friction reduction in supersonic flow using a microblowing technique .AIAA-2000-0545,2000 [12] Hwang D P.Experimental study of characteristics of micro-hole porous skins for turbulent skin friction reduction // 23rd International Congress of Aeronautical Sciences.Toronto,Canada:Elsevier Ltd,2002:2101.1-2101.7 [13] Li Jian,Lee Chun-Hian,Jia Liping,et al.Numerical study on flow control by micro-blowing .AIAA-2009-0779,2009 [14] Menter F R.Two-equation eddy-viscosity turbulence models for engineering applications[J].AIAA Journal,1994,32(8):1598-1605
|