Thermal analysis of high speed permanent magnet brushless DC motor
-
摘要: 为了解决高速永磁无刷直流电机温升过高带来的磁性能降低及绕组绝缘破坏等问题,对高速电机的温度分布及改进措施进行了一系列研究.采用集中参数法建立了电机热网络数学模型,推导出电机损耗、热导和温度之间的解析方程;建立了基于ANSYS/Workbench的电机三维有限元模型,对其进行稳态热分析,从而得到电机整体的温度分布,验证了电机热网络模型的正确性;提出了改变转子护套材料及电机轴打孔两种措施.分析结果表明:改进后的电机转子部分温度有了明显降低,其中护套温度降低了约34℃,永磁体约54℃,解决了电机的局部温度过高问题.Abstract: In order to solve the problems of reduction in magnetic performance and winding insulation damage caused by high temperature in high speed permanent magnet brushless DC motor, a series of research on temperature distribution and improvement was carried out. The thermal network mathematic model was established by lumped parameters method. And an analytic equation accounting for the relationship among motor loss, thermal conductance and temperature was derived. Besides, the motor 3D finite element model was built based on the ANSYS/Workbench, and steady-state analysis was conducted. The temperature distribution of the whole motor was achieved, which verified the results of thermal network model. And two methods including changing the retaining sleeve material and drilling holes on shaft were proposed to solve the temperature problem. According to the analysis results the rotor temperature has dropped obviously, especially the retaining sleeve and permanent magnet with a temperature decrease of about 34℃ and 54℃ respectively.
-
Key words:
- high speed motor /
- thermal network /
- finite element method (FEM) /
- temperature field
-
[1] 余莉.高速永磁无刷直流电机性能分析与设计的研究[D].南京:东南大学电气工程学院,2007
Yu Li.Study on performance analysis and design of high speed permanent magnet brushless DC motor [D].Nanjing:School of Electrical Engineering,Southeast University,2007(in Chinese)[2] 李鲲鹏.高速电机电路模型和铁耗的分析与计算[D].南京:东南大学电气工程学院,2003
Li Kunpeng.High-speed motor circuit model and analysis and calculation of iron losses [D].Nanjing:School of Electrical Engineering,Southeast University,2003(in Chinese)[3] 陈世坤.电机设计[M].2版.北京:机械工业出版社,2000:118-134
Chen Shikun.Motor design [M].2nd ed.Beijing:China Machine Press,2000:118-134 (in Chinese)[4] 黄国治,傅丰礼.中小旋转电机设计手册[M].北京:中国电力出版社,2007:374-390
Huang Guozhi,Fu Fengli.Design manual of middle and small rotary motor[M].Beijing:China Electric Power Press,2007:374-390 (in Chinese)[5] 魏永田,孟大伟,温嘉斌.电机内热交换[M].北京:机械工业出版社,1998:24-33
Wei Yongtian,Meng Dawei,Wen Jiabin.Heat exchange in motor[M].Beijing:China Machine Press,1998:24-33 (in Chinese)[6] Atallah K,Zhu Z Q,Howe D.An improved method for predicting iron losses in brushless permanent magnet DC drives[J].IEEE Transactions on Magnetics,1992,28(5):2997-2999 [7] 张颖博,王凤翔,邢军强,等.高速永磁电机铁耗计算方法研究[J].大电机技术,2009,8:39-43
Zhang Yingbo,Wang Fengxiang,Xing Junqiang,et al.Research on calculation method of core loss for high speed PM machine[J].Large Motor Techniques,2009,8:39-43(in Chinese)[8] Shigematsu K,Oyama J,Higuchi T,et al.The study of eddy current inrotor and circuit coupling analysis for smallsize and ultra-high speed motor[C] //Wang Zhaoan.Proceedings of 4th International Power Electronics and Motion Control Conference.Xi-an:Xi-an Jiaotong University Press,2004,1:275-279 [9] AglenO.Loss calculation and thermal analysisof a high-speedgenerator[C]//2003 IEEE International Electric Machines and Drives Conference.Madison:IEEE,2003,2:1117-1123 [10] Zhang Dianhai,Wang Fengxiang,Kong Xiaoguang.Air friction loss calculation of high speedpermanent magnet machines[C] //Yang K,Wang J.Proceedings of the 11th International Conference on Electrical Machines and Systems.Piscataway,NJ:Institute of Electrical and Electronics Engineers,2008:320-323 [11] Huang Yunkai,Zhu Jianguo,Guo Youguang.Thermal analysis of high-speed SMC motor based on thermal network and 3-D FEA with rotational core loss included[J].IEEE Transactions on Magnetics,2009,45(10):4680-4683 [12] Nerg J,Rilla M,Pyrhonen J.Thermal analysis of radial-flux electrical machines with a high power density[J].IEEE Transactions on Industrial Electronics,2008,55(10):3543-3554 [13] Aglen O,Andersson A.Thermal analysis of a high-speed generator[C] // IEEE Industry Applications Society.Salt Lake:Institute of Electrical and Electronics Engineers,2003,1:547-554 [14] Zhou Fengzheng,Shen Jianxin,Fei Weizhong,et al.Study of retaining sleeve and conductive shield and their influence on rotor loss in high-speed PM BLDC motors[J].IEEE Transactions on Magnetics,2006,42(10):3398-3400 [15] Kolondzovski Z,Belahcen A,Arkkio A.Comparative thermal analysis of different rotor types for a high-speed permanent-magnet electrical machine[J].IET Electric Power Applications,2009,3(4):279-288
点击查看大图
计量
- 文章访问数: 2743
- HTML全文浏览量: 232
- PDF下载量: 936
- 被引次数: 0