高速切削高温合金GH4169数值模拟与实验

范孝良; 吴学华; 王进峰; 康文利

doi:10.13700/j.bh.1001-5965.2015.0436

高速切削高温合金GH4169数值模拟与实验

doi: 10.13700/j.bh.1001-5965.2015.0436

华北电力大学能源动力与机械工程学院, 保定 071003

基金项目: 中央高校基本科研业务费专项资金（14ZD37）；国家自然科学基金（51301068）；河北省自然科学基金（E2014502003）

详细信息

作者简介:
范孝良男,硕士,教授。主要研究方向:数字化设计与制造。Tel.: 0321-7525029 E-mail: wcx803@163.com;王进峰男,博士,副教授。主要研究方向:智能制造、金属切削等。Tel.: 0312-7525045 E-mail: wjf266@163.com

通讯作者:
王进峰,Tel.: 0312-7525045 E-mail: wjf266@163.com

中图分类号: TG506.1
计量
- 文章访问数: 857
- HTML全文浏览量: 44
- PDF下载量: 670
- 被引次数: 0
出版历程
- 收稿日期: 2015-06-30
- 网络出版日期: 2016-07-20

Numerical simulation and experiment in high-speed cutting superalloy GH4169

School of Energy, Power and Mechanical Engineering, North China Electric Power University, Baoding 071003, China

摘要

摘要: 为了准确模拟高温合金GH4169高速切削过程，深入研究了高速切削GH4169的有限元建模技术，包括有限元模型的建立、材料本构模型、切屑分离准则以及接触摩擦模型等关键技术。为了模拟高速切削GH4169的切屑分离过程，研究切屑形态及其形成机理，分别采用Johnson-Cook和各项同性硬化本构关系模型对GH4169的高速加工过程进行二维正交切削有限元模拟，2种模型都获得了相类似的锯齿状切屑。在此基础上，模拟了基于上述2种模型的应力场、温度场和切削力曲线。为了验证有限元模型的有效性和正确性，在CA6140机床进行了GH4169高速车削实验，实验获得的锯齿形切屑验证了2种有限元模型的正确性，实验结果表明：随着切削速度的增大，锯齿状切屑的锯齿化程度增大；绝热剪切是导致高速切削GH4169生成锯齿状切屑的主要原因。实验测量的切削力曲线和切削温度场，与有限元模型A输出结果更好地吻合，进一步表明模型A比模型B更能反映GH4169的实际高速加工特性。
- GH4169 /
- 锯齿切屑 /
- 有限元模拟 /
- Johnson-Cook本构 /
- 各项同性硬化本构 /
- 绝热剪切
Abstract: The finite element modeling technologies of the high-speed cutting superalloy GH4169 were investigated to simulate the cutting process correctly, which include establishing the finite element model, selecting the material constitutive model, and determining the chip separation criteria and contacting friction model, etc. To simulate the chip separation process and research the chip formation mechanism in high-speed cutting GH4169, the two-dimensional orthogonal cutting finite element models were constructed using Johnson-Cook model and isotropic hardening material constitutive model respectively. As a result, two models obtained the similar serrated chip. On this basis, equivalent plastic strain, cutting temperature and cutting force curve were simulated further. To verify the validity of the finite element model, an experiment was carried out by high-speed turning GH4169 on the machine of CA6140, and the serrated chip generated from the turning experiment verifies the validity of two finite element models. The results show that the serrated chip sawtooth degree increases with the increase of cutting speed and the adiabatic shear is the main reason to cause the serrated chip on high-speed cutting superalloy GH4169. The cutting force curve and cutting temperature generated from the experiment accord better with model A, which demonstrates that model A exceeds model B in reflecting the machining characteristics of high-speed cutting GH4169.
- GH4169 /
- serrated chip /
- finite element simulation /
- Johnson-Cook constitutive /
- isotropic hardening material constitutive /
- adiabatic shear

HTML全文

参考文献(18)

[1]	KOMANDURI R,BROWN R H.On the mechanics of chip segmentation in machining[J].Journal of Engineering for Industry,1981,103(1):33-51.
[2]	POULACHON G,MOISAN A L.Hard turning:Chip formation mechanisms and metallurgical aspects[J].Journal of Manufacturing Science and Engineering, 2000, 122(8):406-412.
[3]	吴申峰, 张雪萍.淬硬轴承钢锯齿形切屑形成机理[J].上海交通大学学报,2011,45(1):71-77.WU S F,ZHANG X P.Saw-tooth chip formation process and mechanism in hard turning AISI 52100 bearing steel [J].Journal of Shanghai Jiao Tong University,2011,45(1):71-77(in Chinese).
[4]	郝兆朋.切削 GH4169 的相关机理及高效切削技术的基础研究[D].哈尔滨:哈尔滨工业大学,2013: 19-24.HAO Z P.Research on related mechanism and high efficiency cutting technology in machining nickel-based superalloy GH4169 [D].Harbin:Harbin Institute of Technology,2013:19-24(in Chinese).
[5]	WANG C Y,XIE Y Y,ZHENG L J,et al.Research on the chip formation mechanism during the high-speed milling of hardened steel [J].International Journal of Machine Tools and Manufacture,2014, 79:31-48.
[6]	谷丽瑶,王敏杰,孙传俊.高速切削过程绝热剪切局部化断裂的特性实验[J].机械工程学报,2015,50(15):166-171.GU L Y,WANG M J,SUN C J.Experimental study on characteristics of adiabatic shear localization fracture in high speed machining [J].Journal of Mechanical Engineering,2015,50(15):166-171 (in Chinese).
[7]	MABROUKI T,RIGAL J F.A contribution to a qualitative understanding of thermo-mechanical effects during chip formation in hard turning [J].Journal of Materials Processing Technology,2006,176(1-3):214-221.
[8]	RHIM S H,OH S I.Prediction of serrated chip formation in metal cutting process with new flow stress model for AISI 1045 steel [J].Journal of Materials Processing Technology,2006,171(3):417-422.
[9]	ARRAZOLA P J,BARBERO O,URRESTI I.Influence of material parameters on serrated chip prediction in finite element modeling of chip formation process[J].International Journal of Material Forming,2010,3(Suppl.1):519-522.
[10]	杨奇彪,刘战强.Ti6Al4V切削锯齿形切屑绝热剪切带变形的表征[J].沈阳工业大学学报,2013,35(2):181-186.YANG Q B,LIU Z Q.Deformation characterization of adiabatic shear band for Ti6Al4V serrated chips [J].Journal of Shenyang University of Technology,2013,35(2):181-186(in Chinese).
[11]	肖茂华,何宁,李亮,等.镍基高温合金高速洗削的切削热研究[J].哈尔滨工程大学学报,2011,43(11):105-109.XIAO M H,HE N,LI L,et al.Cutting heat of Ni-base superalloy high speed milling[J].Journal of Harbin Engineering University,2011,43(11):105-109(in Chinese).
[12]	ZHU D Z,CHEN W P,LI Y Y.Strain-rate relationship of aluminum matrix composites predicted by Johnson-Cook model [C]//Proceedings of the 6th International Conference on Physical and Numerical Simulation of Materials Processing.Zurich-Dumten:Trans Tech Publications Ltd,2012:935-940.
[13]	DING H T,SHEN N G.Thermal and mechanical modeling analysis of laser-assisted micro-milling of difficult to machine alloys[J].Journal of Materials Processing Technology,2012,212(3):601-603.
[14]	段春争,王肇喜,李红华.高速切削锯齿形切屑形成过程的有限元模拟[J].哈尔滨工程大学学报,2014,35(2):226-232.DUAN C Z,WANG Z X,LI H H.Finite element simulation of the formation process of a serrated chip in high-speed cutting [J].Journal of Harbin Engineering University,2014,35(2):226-232 (in Chinese).
[15]	黄美霞.虚拟高速切削加工仿真技术研究[D].太原:中北大学,2010.HUANG M X.Virtual simulation technology for high speed cutting [D].Taiyuan:North University of China,2010(in Chinese).
[16]	魏彦杰.金属切削过程刀-屑接触区摩擦状态实验研究[D].秦皇岛:燕山大学．2008:7-9.WEI Y J.Experiental study of friction on the tool-chip contact field in metal cutting process[D].Qinghuangdao:Yanshan University,2008:7-9(in Chinese).
[17]	SCHULZ H,ABELE E.高速加工理论与应用[M].何宁,译.北京:科学出版社,2010:18-21.SCHULZ H,ABELE E.The high speed machining fundamentals and applications[M].HE N,translated.Beijing:Science Press,2010:18-21(in Chinese).
[18]	曹自洋,何宁,李亮,等.高速切削钛合金Ti6Al4V切屑的形成及其数值模拟[J].中国机械工程,2008,19(20):2450-2454.CAO Z Y,HE N,LI L,et al.High-speed cutting of titanium alloy Ti6Al4V chip formation and its numerical simulation[J].Chinese Mechanical Engineering,2008,19(20):2450-2454 (in Chinese).