留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

高速转子连接结构刚度损失及振动特性

洪杰 徐翕如 苏志敏 马艳红

洪杰, 徐翕如, 苏志敏, 等 . 高速转子连接结构刚度损失及振动特性[J]. 北京航空航天大学学报, 2019, 45(1): 18-25. doi: 10.13700/j.bh.1001-5965.2018.0222
引用本文: 洪杰, 徐翕如, 苏志敏, 等 . 高速转子连接结构刚度损失及振动特性[J]. 北京航空航天大学学报, 2019, 45(1): 18-25. doi: 10.13700/j.bh.1001-5965.2018.0222
HONG Jie, XU Xiru, SU Zhimin, et al. Joint stiffness loss and vibration characteristics of high-speed rotor[J]. Journal of Beijing University of Aeronautics and Astronautics, 2019, 45(1): 18-25. doi: 10.13700/j.bh.1001-5965.2018.0222(in Chinese)
Citation: HONG Jie, XU Xiru, SU Zhimin, et al. Joint stiffness loss and vibration characteristics of high-speed rotor[J]. Journal of Beijing University of Aeronautics and Astronautics, 2019, 45(1): 18-25. doi: 10.13700/j.bh.1001-5965.2018.0222(in Chinese)

高速转子连接结构刚度损失及振动特性

doi: 10.13700/j.bh.1001-5965.2018.0222
基金项目: 

国家自然科学基金 51575022

国家自然科学基金 11672017

详细信息
    作者简介:

    洪杰 男, 博士, 教授, 博士生导师。主要研究方向:航空发动机转子动力学、航空发动机整机动力学、智能结构与新型阻尼材料等

    马艳红 女, 博士, 教授, 博士生导师。主要研究方向:航空发动机整机动力学、旋转机械振动控制、智能结构与新型阻尼材料等

    通讯作者:

    马艳红, E-mail: mayanh2002@163.com

  • 中图分类号: V231.96

Joint stiffness loss and vibration characteristics of high-speed rotor

Funds: 

National Natural Science Foundation of China 51575022

National Natural Science Foundation of China 11672017

More Information
  • 摘要:

    高负荷航空发动机转子的转速和支点跨度不断加大,使得转子弯曲刚度下降,并在工作中具有一定弯曲变形。转子弯曲变形时,连接界面会存在刚度损失,需考虑转子弯曲变形对连接界面刚度特性及转子系统振动特性的影响。提出了定量描述连接界面刚度损失的力学模型,并针对非连续转子系统的动力学设计,提出了基于应变能分布优化的连接结构刚度损失抑制方法。数值仿真结果表明:转子弯曲变形下,连接界面刚度损失显著,会使转子弯曲临界转速大幅降低;通过转子应变能分布优化设计可有效降低连接界面刚度损失对转子系统振动特性的影响,对转子系统振动特性优化设计具有重要的指导意义。

     

  • 图 1  先进涡轴发动机

    Figure 1.  Advanced turboshaft engine

    图 2  带连接界面的非连续结构

    Figure 2.  Discontinuous structure with joint interfaces

    图 3  连接界面有效接触面积示意图

    Figure 3.  Schematic of effective contact area of joint interface

    图 4  连接界面应力等效模型

    Figure 4.  Stress equivalent model of joint interface

    图 5  非连续结构转角不连续示意图

    Figure 5.  Schematic of discontinuous rotation of discontinuous structure

    图 6  三级轴流压气机试验器转子结构

    Figure 6.  Rotor structure of three-stage axial compressor tester

    图 7  弯曲振型及其应变能分布

    Figure 7.  Bending mode of vibration and its strain energy distribution

    图 8  连接界面接触状态及接触正应力

    Figure 8.  Joint interface contact state and contact normal stress

    图 9  接触模型与刚度修正模型变形总位移云图

    Figure 9.  Contour of total displacement deformation of contact model and stiffness correction model

    图 10  弯曲振型下连接结构应变能随前支点支承刚度的变化

    Figure 10.  Variation of strain energy of joint structure with support stiffness of front bearing under bending mode of vibration

    表  1  弯曲振型下连接结构应变能占比

    Table  1.   Ratio of strain energy of joint structure under bending mode of vibration

    %
    连接结构 止口A 止口B 止口C 止口D
    应变能占比 0.7 1.1 1.8 2.9
    下载: 导出CSV

    表  2  界面接触面积修正系数

    Table  2.   Interfacial contact area correction coefficient

    界面总面积的抗弯刚度EI/(Pa·mm4) 有效接触面积抗弯刚度EI′/(Pa·mm4) 界面接触面积修正系数η1
    1.5×104 0.82×104 0.55
    下载: 导出CSV

    表  3  界面应力修正系数

    Table  3.   Interfacial stress correction coefficient

    等效线性应力分布 等效抗弯刚度EI″/(Pa·mm4) 界面应力修正系数η2
    σx=1.19×104y+5.16 0.72×104 0.88
    下载: 导出CSV

    表  4  界面弯曲变形修正系数

    Table  4.   Interfacial bending deformation correction coefficient

    受力状态 有效接触面积/mm2 界面弯曲变形修正系数η3
    装配状态 1 170.7
    弯曲变形 956.2 0.82
    下载: 导出CSV

    表  5  各连接结构刚度综合修正系数

    Table  5.   Comprehensive correction coefficient of stiffness for different joint structures

    连接结构 止口A 止口B 止口C 止口D
    刚度综合修正系数 0.86 0.77 0.63 0.40
    下载: 导出CSV

    表  6  刚度损失对转子系统临界转速的影响

    Table  6.   Effect of stiffness loss on critical speed of rotor system

    振型 临界转速/(r·min-1) 考虑刚度损失后临界转速下降比例/%
    不考虑刚度损失 考虑刚度损失
    平动 8 640 8 460 2
    俯仰 16 140 15 720 3
    弯曲 55 020 42 915 22
    下载: 导出CSV

    表  7  优化后刚度损失对转子系统临界转速的影响

    Table  7.   Effect of stiffness loss on critical speed of rotor system after optimization

    振型 临界转速/(r·min-1) 考虑刚度损失后临界转速下降比例/%
    不考虑刚度损失 考虑刚度损失
    平动 9 745 9 581 2
    俯仰 18 086 17 728 2
    弯曲 62 564 54 436 13
    下载: 导出CSV
  • [1] 李松柏.小型挠性转子(准刚性转子)动平衡的工艺分析[J].南方航空科技, 1994(1):22-25. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=QK199400858910

    LI S B.Process study of dynamic balance of small flexible rotor(quasi-rigid rotor)[J].Southern Aeronautics Technology, 1994(1):22-25(in Chinese). http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=QK199400858910
    [2] IBRAHIM R A, PETTIT C L.Uncertainties and dynamic problems of bolted joints and other fasteners[J].Journal of Sound and Vibration, 2005, 279(3):857-936. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=d9a9aeb0b4ac94f611120e1b861f3a99
    [3] 陈萌, 马艳红, 刘书国, 等.航空发动机整机有限元模型转子动力学分析[J].北京航空航天大学学报, 2007, 33(9):1013-1016. doi: 10.3969/j.issn.1001-5965.2007.09.003

    CHEN M, MA Y H, LIU S G, et al.Rotordynamic analysis of whole aero-engine models based on finite element method[J].Journal of Beijing University of Aeronautics and Astronautics, 2007, 33(9):1013-1016(in Chinese). doi: 10.3969/j.issn.1001-5965.2007.09.003
    [4] 谢强.转子活塞发动机动力学特性研究与分析[D].长沙: 国防科学技术大学, 2013: 36-38. http://cdmd.cnki.com.cn/Article/CDMD-90002-1015958790.htm

    XIE Q.The dynamic characteristics research and analysis of the rotor engine[D].Changsha: National University of Defense Technology, 2013: 36-38(in Chinese). http://cdmd.cnki.com.cn/Article/CDMD-90002-1015958790.htm
    [5] HARTWIGSEN C J, SONG Y, MCFARLAND D M, et al.Experimental study of non-linear effects in a typical shear lap joint configuration[J].Journal of Sound and Vibration, 2004, 277(1-2):327-351. doi: 10.1016/j.jsv.2003.09.018
    [6] SONG Y, HARTWIGSEN C J, MCFARLAND D M, et al.Simulation of dynamics of beam structures with bolted joints using adjusted Iwan beam elements[J].Journal of Sound and Vibration, 2004, 273(1-2):249-276. doi: 10.1016/S0022-460X(03)00499-1
    [7] LINK M, BOESWALD M, LABORDE S, et al.An approach to non-linear experimental modal analysis[C]//Proceedings of the IMAC-XXVⅡ, 2011: 119-128.
    [8] LUAN Y, GUAN Z Q, CHENG G D, et al.A simplified nonlinear dynamic model for the analysis of pipe structures with bolted flange joints[J].Journal of Sound and Vibration, 2013, 331(2):325-344. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=45b3469ba6a49387165487dc23e59283
    [9] GAO J, YUAN Q, LI P, et al.Effects of bending moments and pretightening forces on the flexural stiffness of contact interfaces in rod-fastened rotors[J].Proceedings of the ASME Turbo Expo, 2012, 134(10):1492-1494. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=fcd6a0d594769c1a344f51fb32a4ce56
    [10] IRANZAD M, AHMADIAN H.Identification of nonlinear bolted lap joint models[J].Computers & Structures, 2012, 96-97(4):1-8.
    [11] 姚星宇, 王建军, 翟学.航空发动机螺栓连接薄层单元建模方法[J].北京航空航天大学学报, 2015, 41(12):2269-2279. http://bhxb.buaa.edu.cn/CN/abstract/abstract13640.shtml

    YAO X Y, WANG J J, ZHAI X.Modeling method of bolted joints of aero engine based on thin-layer element[J].Journal of Beijing University of Aeronautics and Astronautics, 2015, 41(12):2269-2279(in Chinese). http://bhxb.buaa.edu.cn/CN/abstract/abstract13640.shtml
    [12] 姚星宇, 王建军.航空发动机螺栓连接载荷与结构参数对连接刚度影响规律[J].推进技术, 2017, 38(2):424-433. http://d.old.wanfangdata.com.cn/Periodical/tjjs201702022

    YAO X Y, WANG J J.Effects of load and structure parameters of aero engine bolted joints on joint stiffness[J].Journal of Propulsion Technology, 2017, 38(2):424-433(in Chinese). http://d.old.wanfangdata.com.cn/Periodical/tjjs201702022
    [13] CADDEMI S, CALIO I, CANNIZZARO F.Closed-form solutions for stepped Timoshenko beams with internal singularities and along-axis external supports[J].Archive of Applied Mechanics, 2013, 83(4):559-577. doi: 10.1007/s00419-012-0704-7
    [14] 卢明剑, 孙岩桦, 周健, 等.拉杆组合转子的刚度修正及动力学建模[J].航空动力学报, 2016, 31(9):2203-2209. http://d.old.wanfangdata.com.cn/Periodical/hkdlxb201609020

    LU M J, SUN Y H, ZHOU J, et al.Stiffness modification and dynamic modeling of a rod fastening rotor[J].Journal of Aerospace Power, 2016, 31(9):2203-2209(in Chinese). http://d.old.wanfangdata.com.cn/Periodical/hkdlxb201609020
    [15] 凤朝军.新式支承布局反向旋转双转子系统动力特性研究[D].南京: 南京航空航天大学, 2016: 15-20. http://cdmd.cnki.com.cn/Article/CDMD-10287-1016925574.htm

    FENG C J.The research of the dynamic characteristics of the new bearing layout counter-rotating dual-rotor system[D].Nanjing: Nanjing University of Aeronautics and Astronautics, 2016: 15-20(in Chinese). http://cdmd.cnki.com.cn/Article/CDMD-10287-1016925574.htm
    [16] 史亚杰, 王孝利, 洪杰, 等.柔性转子动力特性研究[J].航空发动机, 2005, 31(1):14-17. doi: 10.3969/j.issn.1672-3147.2005.01.004

    SHI Y J, WANG X L, HONG J, et al.Investigation of dynamic characteristics of flexible rotor system[J].Aeroengine, 2005, 31(1):14-17(in Chinese). doi: 10.3969/j.issn.1672-3147.2005.01.004
  • 加载中
图(10) / 表(7)
计量
  • 文章访问数:  695
  • HTML全文浏览量:  131
  • PDF下载量:  347
  • 被引次数: 0
出版历程
  • 收稿日期:  2018-04-23
  • 录用日期:  2018-07-28
  • 网络出版日期:  2019-01-20

目录

    /

    返回文章
    返回
    常见问答