基于自动有限元建模的民机机翼结构布局优化

闫伟天; 罗明强; 刘虎; 武哲

基于自动有限元建模的民机机翼结构布局优化

北京航空航天大学航空科学与工程学院, 北京 100191

基金项目: 工业和信息化部"民用飞机总体设计支撑软件"基金资助项目

详细信息

中图分类号: V 221
计量
- 文章访问数: 1817
- HTML全文浏览量: 96
- PDF下载量: 599
- 被引次数: 0
出版历程
- 收稿日期: 2012-04-18
- 网络出版日期: 2013-04-30

Layout optimization of civil airplane wing structure based on automated finite element modeling

School of Aeronautic Science and Engineering, Beijing University of Aeronautics and Astronautics, Beijing 100191, China

摘要

摘要: 针对民用飞机中广泛采用的双梁式机翼结构,以机翼结构纵向构件(长桁)和横向构件(翼肋)的数量为参数生成机翼CAD模型,然后基于Patran的PCL(Patran Command Language)语言,根据整体模型分割、局部模型编号、局部网格控制、整体有限元生成的思路,实现了以纵向和横向构件的数量变化为基础自动进行机翼结构有限元模型的构建及分析,并将上述流程集成到机翼结构的布局优化中.最后参照某大型民用飞机的机翼外形尺寸建立了CAD模型,以机翼的静强度、刚度和蒙皮稳定性为约束,以机翼结构质量最低为目标,对上、下蒙皮长桁和翼肋数量进行了优化.优化后的布局使机翼结构质量降低了10.1%,表明了布局优化方法的有效性和可行性.
- 机翼结构 /
- 有限元 /
- 自动建模 /
- 布局优化
Abstract: Focusing on the widely-applied two spar wing structure on civil airplanes, a wing CAD model was created parametrically according to the numbers of its stringers and ribs. Then a wing structure finite element method(FEM) model was constructed automatically by Patran command language(PCL), it was realized by 4 major steps, which were geometry model segmentation, geometry segment renumbering, segment mesh definition and FEM model generation. A complete procedure was fulfilled to construct and analyze a wing structure FEM model automatically after the numbers of its stringers and ribs had been changed, then it was integrated into a wing structure layout optimization that could be applied in preliminary design. In the end, a case study model was constructed referring to a typical civil airplane wing. Under the constraints of static strength, stiffness and skin stability, the numbers of stringers and ribs were optimized to achieve a minimum structure weight. Results show that the optimal layout brought a 10.1% structure weight reduction, which indicates the effectiveness and feasibility of the optimization.
- wing structure /
- finite element method /
- automated modeling /
- layout optimization

HTML全文

参考文献(14)

[1]	Shen J Y,Ferguson F.Weight reduction through optimal arrangement of force-carrying components within wing box structures .AIAA-2004-4495,2004
[2]	Nawijn M,van Tooren M J L,Berends J P T J,et al.Automated finite element analysis in a knowledge based engineering environment .AIAA-2006-947,2006
[3]	王伟,常楠.飞机翼面结构多级布局优化设计思想及需要解决的问题[J].飞机设计,2007,27(5):1-6 Wang Wei,Chang Nan.Multi-level optimization in wing structural configuration design and future research aspects[J].Aircraft Design,2007,27(5):1-6(in Chinese)
[4]	刘颖卓,张永存,刘书田,等.考虑复合材料蒙皮稳定性的飞机翼面结构布局优化设计[J].航空学报,2010,31(10):1985-1992 Liu Yingzhuo,Zhang Yongcun,Liu Shutian,et al.Layout optimization design of wing structures with consideration of stability of composite skin[J].Acta Aeronautica et Astronautica Sinica,2010,31(10):1985-1992(in Chinese)
[5]	Wang Wei,Yang Wei,Chang Nan.Integration shape and sizing optimization of composite wing structure based on response surface Method[J].Transactions of Nanjing University of Aeronautics & Astronautics,2008,25(2):94-100
[6]	何林涛,万小朋,赵美英,等.布局优化和尺寸优化相结合的复合材料机翼优化设计[J].中国机械工程,2008,19(17):2077-2080 He Lintao,Wan Xiaopeng,Zhao Meiying,et al.Composite aircraft wing structure optimization using combination of layout and sizing[J].Chinese Journal of Mechanical Engineering,2008,19(17):2077-2080(in Chinese)
[7]	王伟,赵美英,常楠.基于两相法的机翼结构几何优化设计[J].飞机设计,2007,27(1):22-26 Wang Wei,Zhao Meiying,Chang Nan.Geometrical optimization of aircraft wing based on double-state technology[J].Aircraft Design,2007,27(1):22-26(in Chinese)
[8]	张仲桢,余雄庆,胡添元.飞翼式飞行器结构布局与构件尺寸的两级优化[J].计算机辅助工程,2009,18(1):27-30 Zhang Zhongzhen,Yu Xiongqing,Hu Tianyuan.Two-level optimization on structural layout and component size of flying wing aircraft[J].Computer Aided Engineering,2009,18(1):27-30(in Chinese)
[9]	邓扬晨,詹光,高彤,等.飞机翼面结构布局综合设计方法研究[J].飞机设计,2004(2):28-36 Deng Yangchen,Zhan Guang,Gao Tong,et al.Analysis and synthesis based aircraft wing structural layout study[J].Aircraft Design,2004(2):28-36(in Chinese)
[10]	Skillen M D,Crossley W A.A matlab-based object-oriented process architecture for rapid generation of unconventional wing finite element models .AIAA-2008-2160,2008
[11]	罗明强,冯昊成,刘虎,等.机翼结构有限元的快速建模及自动化调整[J].北京航空航天大学学报,2011,37(6):680-684 Luo Mingqiang,Feng Haocheng,Liu Hu,et al.Rapid wing structural finite element modeling and automated adjustment[J].Journal of Beijing University of Aeronautics and Astronautics,2011,37(6):680-684(in Chinese)
[12]	邓扬晨,廖家驹,章怡宁,等.面向设计的飞机翼面结构有限元自动建模技术[J].飞机设计,2002(1):9-13 Deng Yangchen,Liao Jiaju,Zhang Yining,et al.Design-oriented finite element auto-modeling to aircraft wing structures[J].Aircraft Design,2002(1):9-13(in Chinese)
[13]	Dassault Systèmes.Isight 4.5 Component Guide[M].USA:Dassault Systèmes,2010:621-623
[14]	王宝忠.飞机设计手册第10册:结构设计[M].北京:航空工业出版社,2000:410-411 Wang Baozhong.Aircraft design manual vol 10-structure design[M].Beijing:Aviation Industry Press,2000:410-411(in Chinese)