车身覆盖件抗凹性试验方法及系统

王亮; 李东升; 陈连峰; 李涛

doi:10.13700/j.bh.1001-5965.2013.0395

车身覆盖件抗凹性试验方法及系统

doi: 10.13700/j.bh.1001-5965.2013.0395

1. 北京航空航天大学机械工程及自动化学院, 北京 100191;
2. 首钢集团技术研究院, 北京 100041

详细信息

作者简介:
王亮（1980- ），男，山东莱芜人，博士后，luckwl@126.com.

中图分类号: TG115.5⁺8
计量
- 文章访问数: 1508
- HTML全文浏览量: 28
- PDF下载量: 491
- 被引次数: 0
出版历程
- 收稿日期: 2013-07-03
- 网络出版日期: 2014-06-20

Dent resistance test method and system for auto-body panel

1. School of Mechanical Engineering and Automation, Beijing University of Aeronautics and Astronautics, Beijing 100191, China;
2. Research & Development Center of Technology, Shougang Group Ltd., Beijing 100041, China

摘要

摘要: 针对实际汽车车身外覆盖件的特点，建立了其静态抗凹性试验评估方法；并以试验方法为基础，设计开发了覆盖件抗凹性自动化试验机系统.试验机系统通过集成“5个运动轴+1个加载轴”，保证了加载压头的空间调整能力和可靠加载；基于可编程多轴运动控制器（PMAC，Programmable Multi-Axis motion Controller），通过建立“PC+运动控制器”的控制系统并开发相应的软件系统，实现了对6轴试验机系统运动调整及加载的精确控制；利用近似方法，求解了覆盖件上试验点的法向矢量，并基于机器人运动学原理计算了试验机加载压头由初始位置调整到试验点法方向的运动参数，实现了加载压头的自动法向调整.通过对试验机进行计量并应用，表明试验机系统稳定可靠.
- 覆盖件 /
- 抗凹性 /
- 试验方法 /
- 自动化试验机系统 /
- 法向矢量
Abstract: For the auto-body panel parts characteristics, a test method of dent resistance was introduced. Based on the test method, an automatic tester system for dent resistance test was developed. The tester indenter can be adjustable with arbitrary posture in space and load reliably by integrating "5-axis motion + 1-axis loading". Control hardware system with "PC + motion controller" structure was constructed based on programmable multi-axis motion controller(PMAC). The corresponding control software was developed. Six-axis tester was controlled accurately. The normal vector of a test point on parts was obtained with one approximation method. The motion data of tester indenter adjustment from initial position to test point normal direction was calculated based on the principles of robot kinematics, so the tester was able to load automatically in normal direction of test point on panel parts. Calibration and application indicate that the testing system works stably and reliably.
- auto-body panel parts /
- dent resistance /
- test method /
- automatic tester system /
- normal vector

HTML全文

参考文献(17)

[1]	Nader A. On strength,stiffness and dent resistance of car body panels[J].Journal of Material Process Technology,1995,49(1/2):13-31
[2]	李东升,周贤宾. 双曲扁壳覆盖件抗凹性的定量评估[J].机械工程学报,1998,34(1):69-74 Li Dongsheng,Zhou Xianbin.Evaluation on sinking resistance of double curvature auto-body panels[J].Chinese Journal of Mechanical Engineering,1998,34(1):69-74(in Chinese)
[3]	李雪峰. 汽车板板材抗凹性试验方法理论分析和数值模拟研究[D].北京:北京航空航天大学,2001 Li Xuefeng.Dent resistance testing methods and simulation analysis of automotive panels[D].Beijing:Beijing University of Aeronautics and Astronautics,2001(in Chinese)
[4]	Holmberg S, Thilderkvist P.Influence of material and stamping conditions on the stiffness and static dent resistance of automotive panels[J].Material Design,2002,23(8):681-691
[5]	Holmberg S, Nejabat B.Numerical assessment of stiffness and dent properties of automotive exterior panels[J].Material Design,2004,25(5):361-368
[6]	Zhang Y, Lai X M,Zhu P,et al.Lightweight design of automobile component using high strength steel based on dent resistance[J].Materials Design,2006,27(1):64-68
[7]	Lu H Z, Ma M T,You J H,et al.Dent resistance for automobile body panels[J].Chinese Journal of Mechanical Engineering,2009,22(6):903-911
[8]	张毅,李东升, 周贤宾.双曲扁壳覆盖件静态抗凹性数值模拟研究[J].塑性工程学报,2003,10(6):34-37 Zhang Yi,Li Dongsheng,Zhou Xianbin.The numerical simulation of double-curved autobody panel's static dent resistance[J].Journal of Plasticity Engineering,2003,10(6):34-37(in Chinese)
[9]	Javad M. Thickness and material yield strength effects of thin sheets on dent resistance[J].Wseas Transactions on Applied and Theoretical Mechanics,2007,2(6):127-131
[10]	Li Y, Wang Z J.Finite element analysis of stiffness and static dent resistance of aluminum alloy double-curved panel in viscous pressure forming[J].Transactions of Nonferrous Metals Society of China,2009,19(S2):312-317
[11]	Zeng D, Xia Z C.A comparative study of dent resistance incorporating forming effects[R].SAE Technical Paper 2005-01-0089,2005
[12]	Ekstrand G, Asnafi N.On testing of the stiffness and dent resistance of autobody panels[J].Material Design,1998,19(4):145-156
[13]	李东升,周贤宾, 吕晓东,等汽车板抗凹性评价体系及试验机系统[J].北京航空航天大学学报,2003,29(5):467-470 Li Dongsheng,Zhou Xianbin,Lü Xiaodong,et al.Evaluation system of sinking-resistance for auto-body sheet material[J].Journal of Beijing University of Aeronautics and Astronautic,2003,29(5):467-470(in Chinese)
[14]	汪承璞,俞宁峰, 杨浩源,等.金属板材抗凹性试验的法向加载机构:中国,ZL02261155.X[P].2002-10-31 Wang Chengpu,Yu Ningfeng,Yang Haoyuan,et al.Normal direction loading structure of sheet metal dent resistance test:China,ZL02261155.X[P].2002-10-31(in Chinese)
[15]	汪承璞,俞宁峰, 杨浩源,等.金属板材抗凹性试验的综合测量没备:中国,ZL02261154.1[P].2002-10-31 Wang Chengpu,Yu Ningfeng,Yang Haoyuan,et al.Comprehensive measurement equipment of sheet metal dent resistance test: China,ZL02261154.1[P].2002-10-31(in Chinese)
[16]	Delta Tau Data Systems Inc. PMAC hardware manual PMAC-PC[M].Chatsworth:Delta Tau Data Systems Inc,1998
[17]	Niku S B. Introduction to robotics analysis, systems, application[M].Englewood Cliffs,NJ:Prentice-Hall,2001