泡沫子弹撞击刚性靶板的理论模型

刘虎; 刘华; 杨嘉陵

doi:10.13700/j.bh.1001-5965.2015.0471

泡沫子弹撞击刚性靶板的理论模型

doi: 10.13700/j.bh.1001-5965.2015.0471

北京航空航天大学航空科学与工程学院, 北京 100083

基金项目: 国家自然科学基金（11472035，11472034）

详细信息

作者简介:
刘虎男,博士研究生。主要研究方向:冲击动力学。Tel.: 010-82317507 E-mail: liuhu5260@126.com;刘华女,博士,教授。主要研究方向:纳米和复合材料力学、冲击动力学及结构耐撞性设计等。Tel.: 010-82317507 E-mail: liuhuarui@buaa.edu.cn

通讯作者:
刘华,Tel.: 010-82317507 E-mail: liuhuarui@buaa.edu.cn

中图分类号: O344.2
计量
- 文章访问数: 760
- HTML全文浏览量: 32
- PDF下载量: 470
- 被引次数: 0
出版历程
- 收稿日期: 2015-07-14
- 网络出版日期: 2016-07-20

Theoretical model for a porous projectile striking on flat rigid anvil

School of Aeronautic Science and Engineering, Beijing University of Aeronautics and Astronautics, Beijing 100083, China

摘要

摘要: Taylor撞击常用于测试材料的动态屈服强度。泡沫压缩密度与压缩应变的关系对泡沫子弹Taylor撞击的理论分析起着重要的作用。本文通过引入塑性泊松比，得到了泡沫压缩密度与压缩应变的准确关系，进一步建立了可压缩泡沫子弹撞击刚性靶板的理论模型。当塑性泊松比为常数时，文中建立的泡沫受压后密度比的一阶泰勒展开式可以退化到已有模型。当塑性泊松比为塑性应变和子弹相对密度的函数时，相对密度会影响泡沫子弹的冲击响应历程及最终变形，但对撞击持续时间影响较小。同时，初始速度也会影响子弹最终变形和撞击持续时间。本文的理论工作可以为分析泡沫材料的动态力学行为提供有益指导。
- Taylor撞击 /
- 泡沫材料 /
- 塑性 /
- 塑性泊松比 /
- 刚性
Abstract: Taylor impact is often applied to the determination of the dynamic yield stress of materials. For theoretical analysis of the Taylor impact of porous projectiles, the relationship between the density of a compressed porous projectile and the compressive plastic strain is very important. This paper proposes an exact density model for the compressible porous projectile by inducing the plastic Poisson's ratio, and further, an analytical model is established for the compressible porous projectile striking on a flat rigid anvil. As the plastic Poisson's ratio is a constant, the first order Taylor series expansion of the compression density ratio model can be reduced to the existing model. As the plastic Poisson's ratio is a function of the compressive plastic strain and the relative density, the relative density has a major influence on the impact response and the final deformation of the projectile, but the duration of impact-contact process is almost unaffected. The initial velocity of the projectile has considerable effects on both the final deformation of the projectile and the duration of impact-contact process. The present theoretical model is useful in analyzing the dynamic behavior of porous materials.
- Taylor impact /
- porous material /
- plastic /
- plastic Poisson's ratio /
- rigid

HTML全文

参考文献(15)

[1]	LU G X,YU T X.Energy absorption of structures and materials[M].Cambridge: Woodhead Publishing Ltd.,2003:1-10.
[2]	余同希,邱信明.冲击动力学[M].北京:清华大学出版社,2011:27-36.YU T X,QIU X M.Impact dynamics[M].Beijing:Tsinghua University Press,2011:27-36(in Chinese).
[3]	TAYLOR G.The use of flat-ended projectiles for determining dynamic yield stress I:Theoretical considerations[J].Proceedings of the Royal Society of London A,1948,194(1038):289-299.
[4]	WHIFFIN A C.The use of flat-ended projectiles for determining dynamic yield stress II:Tests on various metallic materials[J].Proceedings of the Royal Society of London A,1948,194(1038):300-322.
[5]	HAWKYARD J B.A theory for the mushrooming of flat-ended projectiles impinging on a flat rigid anvil,using energy consideration[J].International Journal of Mechanical Sciences,1969,11(3):313-333.
[6]	JONES S E,GILLIS P P,FOSTER JR J C,et al.A one-dimensional,two-phase flow model for Taylor impact specimens[J].Journal of Engineering Materials and Technology,1991,113(2):228-235.
[7]	JONES S E,DRINKARD J A,RULE W K,et al.An elementary theory for the Taylor impact test[J].International Journal of Impact Engineering,1998,21(1-2):1-13.
[8]	BRÜIG M,DRIEMEIER L.Numerical simulation of Taylor impact tests[J].International Journal of Plasticity,2007,23(12):1979-2003.
[9]	TENG X,WIERZBICKI T,HIERMAIER S,et al.Numerical prediction of fracture in the Taylor test[J].International Journal of Solids and Structures,2005,42(9):2929-2948.
[10]	MA X,ZHANG D Z,GIGUERE P T,et al.Axisymmetric computation of Taylor cylinder impacts of ductile and brittle materials using original and dual domain material point methods[J].International Journal of Impact Engineering,2013,54:96-104.
[11]	HUTCHINGS I M.Estimation of yield stress in polymers at high strain-rates using Taylor's impact technique[J].Journal of the Mechanics and Physics of Solids,1978,26(5):289-301.
[12]	胡文军,张方举,陈裕泽,等.聚碳酸酯的Taylor撞击实验及光塑性分析[J].高分子材料科学与工程,2010,26(10):115-117.HU W J,ZHANG F J,CHEN Y Z,et al.Taylor impact test of polycarbonate and photoplastic analysis[J].Polymer Materials Science and Engineering,2010,26(10):115-117(in Chinese).
[13]	LU G X,WANG B,ZHANG T G.Taylor impact test for ductile porous materials part I:Theory[J].International Journal of Impact Engineering,2001,25(10):981-991.
[14]	WANG B,ZHANG J,LU G X.Taylor impact test for ductile porous materials part II:Experiments[J].International Journal of Impact Engineering,2003,28(5):499-511.
[15]	王长峰.泡沬金属的动态压溃模型和率敏感性分析[D].合肥:中国科技大学,2013.WANG C F.Dynamic crushing models and rate-sensitivity analysis of metallic foams[D].Hefei:University of Science and Technology of China,2013(in Chinese).