Effect of stress amplitude on high-cycle fatigue life of 2A12-T4 aluminum alloy under proportional loading
-
摘要: 采用2A12-T4铝合金漏斗形试件,针对不同拉扭应力幅比,进行了比例加载下多轴高周疲劳寿命试验,研究了不同应力幅比对多轴高周疲劳寿命的影响.针对试验结果,采用3种常用的多轴高周疲劳寿命预测模型,包括等效应力准则、应力不变量准则、临界面准则进行了预测.结果表明:在相同的Von-Mises等效应力下,随着扭转应力幅与拉压应力幅比值的增大,疲劳寿命逐渐升高.等效应力准则的预测结果或过于危险,或过于安全;应力不变量准则的预测结果认为应力幅比的变化对疲劳失效没有影响,与试验结果不符;临界面准则的预测结果优于其他准则.Abstract: Fatigue life experiments with funneled-shape specimens were conducted to investigate the effect of stress amplitude on multi-axial high-cycle fatigue failure of 2A12-T4 aluminum alloy under tension-torsion proportional loading. Based on the experiment results, three kinds of life-prediction criteria, which were widely used for multi-axial high-cycle fatigue analysis, were discussed. The results showe that under the same von-Mises equivalent stress, fatigue life raised gradually when the ratio of stress amplitude in tension and torsion increased. Fatigue life of uniaxial tension is the shortest and that of pure torsion is the longest. The forecast results of equivalent stress criteria are either too dangerous, or too conservative. Stress invariant criteria cannot predict the impact of stress-amplitude ratio on multi-axial high-cycle fatigue failure. Critical-plane criteria has better prediction capability than others.
-
Key words:
- fatigue /
- multi-axial high-cycle fatigue /
- fatigue life /
- proportional loading /
- stress amplitude
-
[1] McDiarmid D L.Fatigue under out-of-phase bengding and torsion[J].Fatigue and Fracture of Engineering Materials & Structures,1987,10(6):457-475 [2] Lee S B.A criterion for fully reversed out-of-phase torsion and bending //Miller K J,Brown M W.Multiaxial Fatigue.San Francisco:ASTM STP,1985,553-568 [3] Carpinteri A,Spagnoli A.Multiaxial high-cycle fatigue criterion for hard metals[J].International Journal of Fatigue,2001,23(2):135-145 [4] Sines G,Ohgi G.Fatigue criterion under combined stresses or strains[J].Journal of Engineering Materials Technology,1981,103(2):82-90 [5] Papadopoulos I V,Davoli P,Gorla C,et al.A comparative study of multiaxial high-cycle fatigue criteria for metals[J].International Journal of Fatigue,1997,19(3):219-235 [6] Lazzarin P,Susmel L.A stress-based method to predict lifetime under multiaxial fatigue loadings[J].Fatigue and Fracture of Engineering Materials & Structures,2003,26(12):1171-1187 [7] 陈旭,安柯,齐荣.非比例载荷下304不锈钢低周疲劳寿命预测[J].机械强度,2001,23(3):316-318 Chen Xu,An Ke,Qi Rong.Low cycle fatigue life prediction for 304 stainless steel under nonproportional loadings[J].Journal of Mechanical Strength,2001,23(3):316-318(in Chinese) [8] Karolczuk A,Macha E.Selection of the critical plane orientation in two-parameter multiaxial fatigue failure criterion under combined bending and tortion[J].Engineering Fracture Mechanics,2008,75(3/4):389-403 -
点击查看大图
计量
- 文章访问数: 7060
- HTML全文浏览量: 259
- PDF下载量: 1535
- 被引次数: 0
下载:
