Citation: | LIU Jianhua, GAO Qingna, LI Yingdong, et al. Oxidation behavior of 5A06 and 2A12 aluminum alloys in sulfuric-adipic acid and electrochemical property of anodic oxide film[J]. Journal of Beijing University of Aeronautics and Astronautics, 2015, 41(5): 757-763. doi: 10.13700/j.bh.1001-5965.2014.0330(in Chinese) |
[1] |
de Miear M S,Skeldon P,Thompson G E.The behavior of second phase particles during anodizing of aluminumalloys[J].Corrosion Science,2010,52(7):2489-2497.
|
[2] |
Garcia-Vergara S J,Khazmi K,Skeldon P,et al.Influence of copper on the morphology of porous anodic alumina[J].Corrosion Science,2006,48(10):2937-2946.
|
[3] |
Ma S J,Luo P,Zhou H H.Preparation of anodic films on 2024 aluminum alloy in boric acid containing mixed electrolyte[J].Transactions of Nonferrous Metals Society of China,2008,18(4):825-830.
|
[4] |
Feliu S Jr,Gonzalez J A,Lopez V.Characterization of porous and barrier layers of anodic oxides on different aluminum alloys[J].Journal Applied Electrochemistry,2007,37(9):1027-1037.
|
[5] |
Fanny S,Christine B,Georges M.Characterization of sealed anodic films on 7050 T74 and 2214 T6 aluminum alloys[J].Surface and Coatings Technology,2002,154(1):94-103.
|
[6] |
刘建华,刘洲,于美,等.3种溶液体系下铝合金阳极氧化膜的性能[J].中国有色金属学报,2012,22(7):2031-2039. Liu J H,Liu Z,Yu M,et al.Properties of aluminum alloy anodic films formed in three kinds of solutions[J].The Chinese Journal of Nonferrous Metals,2012,22(7):2031-2039(in Chinese).
|
[7] |
刘建华,李永星,于美,等.三种无铬封闭方法对铝合金阳极氧化膜耐蚀性的影响[J].材料热处理学报,2011,32(10):129-133. Liu J H,Li Y X,Yu M,et al.Effects of chromium-free sealing methods on corrosion resistance of anodic oxide films on aluminum alloy[J].Transactions of Materials and Heat Treatment,2011,32(10):129-133(in Chinese).
|
[8] |
于美,陈高红,刘建华,等.LY12CZ铝合金的己二酸硫酸阳极氧化[J].北京航空航天大学学报,2012,38(3):363-379. Yu M,Chen G H,Liu J H,et al.Adipic-sulfuric acid anodizing for LY12CZ aluminum alloy[J].Journal of Beijing University of Aeronautics and Astronautics,2012,38(3):363-379(in Chinese).
|
[9] |
于美,陈高红,刘建华,等.己二酸对铝合金硫酸阳极氧化疲劳性能的影响[J].金属热处理,2011,36(6):50-53. Yu M,Chen G H,Liu J H,et al.Effect of adipic acid on fatigue performance of sulfuric anodizing for aluminum alloy[J].Heat Treatment of Metals,2011,36(6):50-53(in Chinese).
|
[10] |
Curioni M,Skeldon P,Koroleva E,et al.Role of tartaric acid on the anodizing and corrosion behavior of AA 2024 T3 aluminum alloy[J].Journal of the Electrochemical Society,2009,156(4): C147-C153.
|
[11] |
de Miera M S,Curioni M,Skeldon P,et al.Modeling the anodizing behavior of aluminum alloys in sulphuric acid through alloy analogues[J].Corrosion Science,2008,50(12):3410-3415.
|
[12] |
Curioni M,de Miera M S,Skeldon P,et al.Macroscopic and local filming behavior of AA2024 T3 aluminum alloy during anodizing in sulfuric acid electrolyte[J].Journal of the Electrochemical Society,2008,155(8):C387-C395.
|
[13] |
Zhou X,Thompson G E,Skeldon P.Film formation and detachment duringanodizing of Al-Mg alloys[J].Corrosion Science,1999,41(8):1599-1613.
|
[14] |
Song G,Atrens A,John D S T.The anodic dissolution of magnesium in chloride and sulphate solutions[J].Corrosion Science,1997,39(10):1981-2004.
|
[15] |
Thompson G E. Porous anodic alumina:fabrication,characterization and applications[J].Thin Solid Films,1997,297(1):192-201.
|
[16] |
Iglesias-Rubianes L,Garcia-Vergara S J,Skeldon P.Cyclic oxidation processes during anodizing of Al-Cu alloys[J].Electrochimica Acta,2007,52(24):7148-7157.
|
[17] |
Hitzig J,Juttner K,Lorenz W J.AC-impendence measurements on corroded porous aluminum oxide films[J].Electrochemical Science and Technology,1986,133(5):887-892.
|
[18] |
钱建才,李兵,敖辽辉,等.2A12铝合金表面聚苯胺/阳极氧化膜复合层电化学性能研究[J].表面技术,2009,38(5):20-22. Qian J C,Li B,Ao L H,et al.Electrochemical behavior of polyaniline-anodized composite coating on 2A12 aluminum alloy[J].Surface Technology,2009,38(5):20-22(in Chinese).
|
[19] |
钱建才,邹洪庆,吕基成.聚苯胺掺杂对2A12铝合金阳极氧化复合膜耐蚀性的影响[J].材料保护,2011,44(2):3-6. Qian J C,Zou H Q,Lv J C.Effect of doping polyaniline on corrosion resistance of anodizing composite coatings of 2A12 aluminum alloy[J].Journal of Materials Protection,2011,44(2):3-6(in Chinese).
|