留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

静压气浮直驱转台热特性

张从鹏 刘同 李美波

张从鹏, 刘同, 李美波等 . 静压气浮直驱转台热特性[J]. 北京航空航天大学学报, 2014, 40(7): 893-898. doi: 10.13700/j.bh.1001-5965.2013.0771
引用本文: 张从鹏, 刘同, 李美波等 . 静压气浮直驱转台热特性[J]. 北京航空航天大学学报, 2014, 40(7): 893-898. doi: 10.13700/j.bh.1001-5965.2013.0771
Zhang Congpeng, Liu Tong, Li Meiboet al. Thermal characteristic of aerostatic direct-driven rotary stage[J]. Journal of Beijing University of Aeronautics and Astronautics, 2014, 40(7): 893-898. doi: 10.13700/j.bh.1001-5965.2013.0771(in Chinese)
Citation: Zhang Congpeng, Liu Tong, Li Meiboet al. Thermal characteristic of aerostatic direct-driven rotary stage[J]. Journal of Beijing University of Aeronautics and Astronautics, 2014, 40(7): 893-898. doi: 10.13700/j.bh.1001-5965.2013.0771(in Chinese)

静压气浮直驱转台热特性

doi: 10.13700/j.bh.1001-5965.2013.0771
基金项目: 

北京市人才强教计划资助项目(PHR201108053);北京市教委科技计划资助项目(KM200910009005)

详细信息
    作者简介:

    张从鹏(1975-),男,河南鲁山人,副教授,soaringroc@ncut.edu.cn.

  • 中图分类号: TH133.35

Thermal characteristic of aerostatic direct-driven rotary stage

  • 摘要: 以开发满足精密工程应用的静压气浮直驱转台为目标,研究静压气浮直驱转台结构的热稳定性.首先,分析了静压气浮直驱转台的发热-传热特性,建立了三维热特性有限元模型,计算了气浮直驱转台的温度场云图;用间接耦合的分析方法,将温度场作加载条件,进行转台热-结构耦合分析;然后,对比研究了两种直驱电机安置结构对转台热稳定性的影响,提出了静压气浮直驱转台的空气强制对流冷却方案;最后,完成了无框力矩电机后置式静压气浮直驱转台的温度场检测实验.实验结果表明,静压气浮直驱转台测试点的计算与实测温度的最大误差为1.93 ℃,稳态温度场分布计算精度较高;温度分布稳态时,气浮转台止推轴承气膜单侧间隙的变化量为0.55 μm,在空气轴承气膜设计允许的波动范围内,对轴承性能不产生明显的影响.电机后置式直驱静压气浮转台结构的热稳定性好,适合工业应用.

     

  • [1] Zhang C P, Li M, Luo X K.Thermal characteristics analysis of aerostatic direct drive rotary stage[J].Advanced Materials Research, 2013, 655-657:287-291
    [2] Zhu J C, Chen H, Chen X D. Large eddy simulation of vortex shedding and pressure fluctuation in aerostatic bearings[J].Journal of Fluids and Structures, 2013, 40:42-51
    [3] Chen X D, Chen H, Luo X, et al.Air vortices and nano-vibration of aerostatic bearings[J].Tribology Letters, 2011, 42(2):179-183
    [4] Chen X D, He X M.The effect of the recess shape on performance analysis of the gas-lubricated bearing in optical lithography[J].Tribology International, 2006, 39(11):1336-1341
    [5] 吴贺. 超高速空气静压电主轴热特性分析[D].广州:广东工业大学, 2012 Wu He.Analysis on the thermal characteristics of ultra high-speed aerostatic motorized spindle[D].Guangzhou:Guangdong University of Technology, 2012(in Chinese)
    [6] 王保民, 胡赤兵, 孙建仁, 等.高速电主轴热态特性的ANSYS仿真分析[J].兰州理工大学学报, 2009, 35(1):28-31 Wand Baomin, Hu Chibing, Sun Jianren, et al. Simulation analysis of thermal characteristics of high-speed motorized spindle by using ANSYS[J].Journal of Lanzhou University of Technology, 2009, 35(1):28-31(in Chinese)
    [7] Bossmanns B, Tu J F.A power flow model for high speed motor-ized spindles—heat generation characterization[J].Journal of Manufacturing Science and Engineering, 2001, 123(3):494-505
    [8] 张从鹏, 罗学科, 谢峰. 一种静压气浮直驱转台:中国, 201010294885[P].2012-04-18 Zhang Congpeng, Luo Xueke, Xie Feng.A aerostatic direct drive rotary stage:China, 201010294885[P].2014-04-18(in Chinese)
    [9] 张明华, 袁松梅, 刘强.基于有限元分析方法的高速电主轴热态特性研究[J].制造技术与机床, 2008(4):29-32 Zhang Minghua, Yuan Songmei, Liu Qiang.Research on thermal characteristics for high speed motorized spindle based on finite element analysis[J].Manufacturing Technology & Machine Tool, 2008(4):29-32(in Chinese)
    [10] 陈兆年, 陈子辰. 机床热态特性学基础[M].北京:机械工业出版社, 1989 Chen Zhaonian, Chen Zichen.Machine tool thermal state characteristics[M].Beijing:Mechanical Industry Press, 1989(in Chinese)
    [11] 李美波. 高性能静压气浮运动系统热耦合分析及热误差控制[D].北京:北方工业大学, 2013 Li Meibo.Research on thermal characteristic and thermal error control of high-performance aerostatic motion system[D].Beijing:North China University of Technology, 2013(in Chinese)
    [12] 池长青. 气体动静压轴承的动力学及热力学[M].北京:北京航空航天大学出版社, 2008 Chi Changqing.Dynamics and thermodynamics for gas bearing[M].Beijing:Beihang University Press, 2008(in Chinese)
    [13] 陈学东, 何学明. 超精密气浮定位工作台技术——气浮系统动力学与控制[M].武汉:华中科技大学出版社, 2008 Chen Xuedong, He Xueming.Research on ultra precise positioning stage with gas-lubricated bearings—dynamics and control of the gas-lubricated system[M].Wuhan:Huazhong University of Science and Technology Press, 2008(in Chinese)
    [14] 戴锅生. 传热学[M].北京:高等教育出版社, 2002:21-53 Dai Guosheng.Heat transfer theory[M].Beijing:Higher Education Press, 2002:21-53(in Chinese)
    [15] 刘剑. 划片机空气静压主轴静态与热态特性的有限元分析与实验研究[D].上海:华东理工大学, 2011 Liu Jian.Static and thermal characteristics finite element analysis and experimental study of aerostatic spindle in dicing[D].Shanghai:East China University of Technology University, 2011(in Chinese)
  • 加载中
计量
  • 文章访问数:  1172
  • HTML全文浏览量:  121
  • PDF下载量:  921
  • 被引次数: 0
出版历程
  • 收稿日期:  2014-01-14
  • 网络出版日期:  2014-07-20

目录

    /

    返回文章
    返回
    常见问答