北京航空航天大学学报 ›› 2015, Vol. 41 ›› Issue (2): 198-202.doi: 10.13700/j.bh.1001-5965.2014.0142

• 论文 • 上一篇    下一篇

高温结构可靠性分析的时变响应面法

马小兵1,2, 任宏道1, 蔡义坤1   

  1. 1. 北京航空航天大学 可靠性与系统工程学院, 北京 100191;
    2. 北京航空航天大学 可靠性与环境工程技术国防科技重点实验室, 北京 100191
  • 收稿日期:2014-03-21 出版日期:2015-02-20 发布日期:2015-03-12
  • 通讯作者: 马小兵(1978—), 男, 陕西铜川人, 高级工程师, maxiaobing@buaa.edu.cn, 主要研究方向为寿命与可靠性评估. E-mail:maxiaobing@buaa.edu.cn
  • 基金资助:

    国家自然科学基金资助项目(61104133)

Time-varying response surface method for high-temperature structural reliability analysis

MA Xiaobing1,2, REN Hongdao1, CAI Yikun1   

  1. 1. School of Reliability and Systems Engineering, Beijing University of Aeronautics and Astronautics, Beijing 100191, China;
    2. Key Laboratory of National Defense Technology for Reliability & Environment Engineering Technology, Beijing University of Aeronautics and Astronautics, Beijing 100191, China
  • Received:2014-03-21 Online:2015-02-20 Published:2015-03-12

摘要:

高温条件下结构的本构方程和承载能力都随时间变化,传统的结构可靠性模型在分析这种时变结构可靠性问题时效率较低.提出一种可用于高温结构可靠性分析的热响应与响应量阈值均随时间变化的时变响应面法.首先,通过引入结构各基本变量与时间的交叉二次函数并结合Box-Behnken试验设计建立结构热响应量的时变模型;进而,以温度为中间变量,建立结构响应量阈值与时间的函数关系,据此得到用随机过程表示的时变极限状态函数.具体给出了基本变量服从正态分布情形下的结构时变可靠度计算方法.算例分析表明该方法切实可行,能够在保证计算精度的基础上大幅提高计算效率.

关键词: 高温结构, 试验设计, 时变响应面法, 时变极限状态函数, 结构可靠性

Abstract:

The constitutive equation and carrying capacity of structure will change over time under high temperature conditions. The traditional structural reliability models are inefficient to solve these time-varying structural reliability problems. A time-varying response surface method with thermal response and response threshold value changing over time was proposed. The method can be used for high-temperature structural reliability analysis. Combined with Box-Behnken experimental design, a cross quadratic function of structure's basic variables and time was introduced for establishing a time-varying model of the thermal structural response. The function of structural response threshold value and time was established by using temperature as intermediate variable. The time-varying structural reliability calculation method was proposed when basic variables are normally distributed. A study case was given to demonstrate the applicability of this method and its greatly enhanced effectiveness besides accuracy.

Key words: high-temperature structure, experimental design, time-varying response surface method, time-varying limit state function, structure reliability

中图分类号: 


版权所有 © 《北京航空航天大学学报》编辑部
通讯地址:北京市海淀区学院路37号 北京航空航天大学学报编辑部 邮编:100191 E-mail:jbuaa@buaa.edu.cn
本系统由北京玛格泰克科技发展有限公司设计开发