北京航空航天大学学报 ›› 2016, Vol. 42 ›› Issue (9): 1969-1976.doi: 10.13700/j.bh.1001-5965.2015.0536

• 论文 • 上一篇    下一篇

结构动力特性分析中的圆角建模方法

邓昊, 程伟   

  1. 北京航空航天大学 航空科学与工程学院, 北京 100083
  • 收稿日期:2015-08-24 出版日期:2016-09-20 发布日期:2015-11-19
  • 通讯作者: 程伟,Tel.:13911016336,E-mail:cheng_wei@buaa.edu.cn E-mail:cheng_wei@buaa.edu.cn
  • 作者简介:邓昊,男,硕士研究生。主要研究方向:计算结构动力学。Tel.:15313257835,E-mail:15313257835@163.com;程伟,男,博士,教授,博士生导师。主要研究方向:结构动力学。Tel.:13911016336,E-mail:cheng_wei@buaa.edu.cn

Fillet modeling method in analysis of structural dynamic characteristics

DENG Hao, CHENG Wei   

  1. School of Aeronautic Science and Engineering, Beijing University of Aeronautics and Astronautics, Beijing 100083, China
  • Received:2015-08-24 Online:2016-09-20 Published:2015-11-19

摘要: 针对薄壁结构中存在大量的圆角,提出了运用梁单元与壳单元组合的建模方法对圆角进行等效建模。通过分析圆角对薄壁结构的刚度贡献,提出圆角对结构刚度的贡献分为面内刚度贡献和面外刚度贡献。圆角对面外刚度的贡献与梁的作用等效,通过运用扭转相关理论推导出等效梁单元的截面参数。对于圆角的面内效应,运用壳单元对其进行等效建模,采用平面应变状态假设,将三维结构简化为二维结构。在平面内,通过刚度等效原理计算出壳单元的等效厚度与弹性模量。通过2个实例验证了圆角建模方法的正确性与准确性。

关键词: 圆角等效建模, 结构动态特性, 扭转刚度, 平面应变状态, 刚度等效

Abstract: In view of the large number of rounded corners in thin-walled structures, the equivalent modeling method is presented based on the combination of beam element and shell element. Through the analysis of the contribution of the fillet to the stiffness of the thin-walled structure, the contribution was divided into in-plane stiffness contribution and out-of-plane stiffness contribution. The contribution effect of the fillet to the out-of-plane stiffness is equivalent to the beam. The section parameters of the equivalent beam element were derived by using the theory of torsion. For the in-plane effects of the fillet, the equivalent model was established by using shell element. The three-dimensional structure was simplified to a two-dimensional structure by using the plane strain state assumption. In plane, the equivalent thickness and elastic modulus of shell element were calculated by the equivalent stiffness principle. The correctness and accuracy of the modeling method are verified by two examples.

Key words: fillet equivalent modeling, structural dynamic characteristics, torsional rigidity, plane strain state, stiffness equivalent

中图分类号: 


版权所有 © 《北京航空航天大学学报》编辑部
通讯地址:北京市海淀区学院路37号 北京航空航天大学学报编辑部 邮编:100191 E-mail:jbuaa@buaa.edu.cn
本系统由北京玛格泰克科技发展有限公司设计开发