基于故障行为模型的产品寿命分析方法

查国清; 井海龙; 陈云霞; 康锐

doi:10.13700/j.bh.1001-5965.2015.0739

基于故障行为模型的产品寿命分析方法

doi: 10.13700/j.bh.1001-5965.2015.0739

北京航空航天大学可靠性与系统工程学院, 北京 100083

详细信息

作者简介:
查国清,男,博士研究生。主要研究方向:故障控制论、公共安全。E-mail:zgq@buaa.edu.cn;井海龙,男,博士研究生。主要研究方向:产品耐久性分析与试验技术。Tel.:010-82338236,E-mail:jinghailong@buaa.edu.cn;陈云霞,女,博士,教授,博士生导师。主要研究方向:产品故障学、复杂系统可靠性建模与仿真、高可靠长寿命产品设计与试验技术等。Tel.:010-82338909,E-mail:chenyunxia@buaa.edu.cn;康锐,男,教授,博士生导师。主要研究方向:确信可靠性理论与方法、信息物理系统可靠性建模与仿真、可靠性系统工程方法论、故障控制论。E-mail:kangrui@buaa.edu.cn

通讯作者:
陈云霞,Tel.:010-82338909,E-mail:chenyunxia@buaa.edu.cn

中图分类号: V120.50
计量
- 文章访问数: 756
- HTML全文浏览量: 86
- PDF下载量: 590
- 被引次数: 0
出版历程
- 收稿日期: 2015-11-11
- 修回日期: 2015-12-06
- 网络出版日期: 2016-11-20

Life analysis method for products based on failure behavior models

School of Reliability and Systems Engineering, Beijing University of Aeronautics and Astronautics, Beijing 100083, China

摘要

摘要: 针对传统可靠性工程方法无法满足高可靠长寿命需求产品设计与分析要求的现状。本文充分考虑引起产品寿命分散性的内因和外因的不确定性，在产品功能模型或数字样机模型的基础上，结合产品的故障行为模型，建立了一种基于产品故障行为模型的产品寿命分析方法。在该方法中，内因参数与外因参数的分散性分别可以用相应的概率密度函数来表示，都是通过对实际使用情况和生产条件的估计得到的，因此，按照这种方法评估得到的产品寿命特征，能够弥补基于故障物理的可靠性预计方法无法体现产品正常使用条件的不足。
- 故障行为模型 /
- 机理分析 /
- 耗损性失效机理 /
- 寿命分析 /
- 故障物理
Abstract: With the situation that traditional reliability engineering methods cannot meet the demand of design and analysis for the products with high reliability and long life index, this paper considers the uncertainty of inner and outside factors which cause the life dispersion, and on the basis of product functional models or digital prototype models, with the failure behavior model of products, a method is proposed to conduct the life analysis for products with long life index. The dispersion of inner and outside parameters can be expressed by the probability density function and obtained by analyzing the actual use and production conditions. Thus the life characteristics of products obtained with this method can remedy the disadvantage that the reliability prediction method based on physics of failure cannot reflect the actual normal use conditions of the products.
- failure behavior model /
- mechanism analysis /
- wear-out failure mechanism /
- life analysis /
- physics of failure

HTML全文

参考文献(16)

[1]	SALEH J H,MARAIS K.Highlights from the early(and pre-) history of reliability engineering[J].Reliability Engineering and System Safety,2006,91(2):249-256.
[2]	MCLINN J.A short history of reliability[J].Journal of Reliability Data Analysis Center,2011,54(1):8-15.
[3]	MEEKER W Q,ESCOBAR L A.Statistical methods for reliability data[M].Hoboken:John Wiley & Sons,2014:350-420.
[4]	ZACKS S.Introduction to reliability analysis:Probability models and statistical methods[M].Berlin:Springer Science & Business Media,2012:100-150.
[5]	GNEDENKO B V,BELYAYEV Y K,SOLOVYEV A D.Mathematical methods of reliability theory[M].Manhattan:Academic Press,2014:300-500.
[6]	ZHOU T,DONG J B,PENG L X,et al.Designing method research of generalized reliability margin for complex system[C]//IEEE Conference on Prognostics and System Health Management (PHM).Piscataway,NJ:IEEE Press,2012:1-4.
[7]	MEEKER W Q,HAMADA M.Statistical tools for the rapid development and evaluation of high-reliability products[J].IEEE Transactions on Reliability,1995,44(2):187-198.
[8]	邓爱民.高可靠长寿命产品可靠性技术研究[D].长沙:国防科学技术大学,2006:1-7.DENG A M.Research on reliability technology of high-reliability and long-lifetime products[D].Changsha:National University of Defense Technology,2006:1-7.
[9]	陈云霞,赵安,康锐.非电产品寿命分析和试验方法研究[C]//中国运筹学会可靠性分会第九届可靠性学术会议论文集.长沙:中国运筹学会,2013:205-211.CHEN Y X,ZHAO A,KANG R.Research on life analysis and test method for non-electric products[C]//The Reliability of the Operational Research Society of China,the Ninth Session of the Reliability Academic Conference.Changsha:Operations Research Society of China,2013:205-211(in Chinese).
[10]	ZENG Z G,CHEN Y X,KANG R.Failure behavior modeling:Towards a better characterization of product failures[J].Chemical Engineering Transactions,2013,33(2):571-576.
[11]	ZENG Z G,KANG R,CHEN Y X.A physics-of-failure-based approach for failure behavior modeling:With a focus on failure collaborations[C]//Proceedings of Annual European Safety and Reliability Conference (ESREL2014).Piscataway,NJ:IEEE Press,2014:1-9.
[12]	陈云霞.性能与可靠性一体化建模和分析方法研究[D].北京:北京航空航天大学,2004:22-24.CHEN Y X.Study on method of modeling and analysis for integrating performance and reliability[D].Beijing:Beihang University,2004:22-24(in Chinese).
[13]	MATHEW S,ALAM M,PECHT M.Identification of failure mechanisms to enhance prognostic outcomes[J].Journal of Failure Analysis and Prevention,2012,12(1):66-73.
[14]	CHEN Y X,JING H L,LIAO X,et al Methods to determine stress profile in ALT based on theoretical life models[J].Chinese Journal of Aeronautics,2015,28(3):729-736.
[15]	杨振海,程维虎.非均匀随机数产生[J].数理统计与管理,2006,25(6):750-756.YANG Z H,CHENG W H.The common method of generating random number for the non-uniform distribution[J].Jouranl of Applied Statistics and Management,2006,25(6):750-756(in Chinese).
[16]	LIAO X,CHEN Y X.Research on the wear life of slipper in aero-hydraulic pump based on Archard wear model and liquid friction work[C]//2013 International Conference on Quality,Reliability,Risk,Maintenance,and Safety Engineering(QR2MSE).Piscataway,NJ:IEEE Press,2013:930-934.