转动副临界角分析及其在四连杆机构中的应用

doi:10.13700/j.bh.1001-5965.2015.0812

北京航空航天大学学报 ›› 2016, Vol. 42 ›› Issue (12): 2738-2744.doi: 10.13700/j.bh.1001-5965.2015.0812

转动副临界角分析及其在四连杆机构中的应用

张洁, 王丹, 陈五一

北京航空航天大学机械工程及自动化学院, 北京 100083

收稿日期:2015-12-08 出版日期:2016-12-20 发布日期:2016-04-11
通讯作者: 王丹,Tel.:010-82317471,E-mail:b11034@buaa.edu.cn E-mail:b11034@buaa.edu.cn
作者简介:张洁,女,硕士研究生。主要研究方向:并联机构设计。E-mail:mercury1307217@126.com;王丹,男,博士,讲师。主要研究方向:并联机器人及智能控制、CNC机床设计与可靠性测试。Tel.:010-82317471,E-mail:b11034@buaa.edu.cn;陈五一,男,博士,教授,博士生导师。主要研究方向:先进加工技术与新型工艺装备。E-mail:wychen@buaa.edu.cn
基金资助:
国家自然科学基金（51305013）

Critical angle of revolute pin joint and its application in a four-bar mechanism

ZHANG Jie, WANG Dan, CHEN Wuyi

School of Mechanical Engineering and Automation, Beijing University of Aeronautics and Astronautics, Beijing 100083, China

Received:2015-12-08 Online:2016-12-20 Published:2016-04-11
Supported by:
National Natural Science Foundation of China (51305013)

摘要/Abstract

摘要： 滑动配合条件下，转动副（R副）通过接触面间的相对滑动提供一个转动自由度。由于接触面间的摩擦和间隙共同作用，R副会在一个小的摆角范围内发生自锁，这一摆角将在机构平衡时带来连杆长度误差和连杆偏角误差。本文指出了R副中临界角的存在，讨论了使得R副实现自锁的临界角范围，在考虑接触变形和不考虑接触变形2种条件下对临界角进行了计算，并以一平面四连杆机构作为应用算例，综合对比了铰链间隙、接触变形和摩擦因素对所在连杆机构输出精度的影响。算例结果表明，在一般的精度计算中铰链间隙及连杆弹性变形起主要影响作用，铰链本身的接触变形量可忽略。

关键词: 转动副(R副), 临界角, 摩擦角, 平面四连杆机构, 精度分析

Abstract: Revolute pin joint (revolute pair) possesses one degree of freedom, i.e. rotation movement, through relative sliding between contact pairs. Existence of friction and clearance in revolute joints has crucial effects on the overall precision of mechanism. Using the concept of critical angle, the marginal value in which revolute joints could keep in balance state is discussed in this study. Firstly, frictional angle and self-lock caused by friction and clearance in revolute pin joints are investigated, which contribute to not only length error but also angle error in mechanism with such joints. Then, critical angles are calculated with and without contact deformation respectively. Moreover, a four-bar mechanism with one revolute joint studied above is chosen as a case study to evaluate the impact of clearance of joint, contact deformation and friction on the overall precision. Analytical results indicate that the clearance in revolute joint and elastic deformation of mechanism play the most important roles in the system, and the contact deformation of joint could be neglected in the overall precision analysis.

Key words: revolute pin joint (revolute pair), critical angle, frictional angle, four-bar mechanism, precision analysis

中图分类号:

TB122

张洁, 王丹, 陈五一. 转动副临界角分析及其在四连杆机构中的应用[J]. 北京航空航天大学学报, 2016, 42(12): 2738-2744.

ZHANG Jie, WANG Dan, CHEN Wuyi. Critical angle of revolute pin joint and its application in a four-bar mechanism[J]. JOURNAL OF BEIJING UNIVERSITY OF AERONAUTICS AND A, 2016, 42(12): 2738-2744.

参考文献

[1] 邹慧君,高峰.现代机构学进展[M].北京:高等教育出版社,2007:93-94.ZOU H J,GAO F.The progress of modern organizations[M].Beijing:Higher Education Press,2007:93-94(in Chinese).
[2] 郭卫东.机械原理[M].北京:科学出版社,2010:168.GUO W D.Mechanical principle[M].Beijing:Science Press,2010:168(in Chinese).
[3] 黄昔光,廖启征.空间6R串联机器人机构位置逆解新算法[J].北京航空航天大学学报,2010,36(3):295-298.HUANG X G,LIAO Q Z.A new algorithm position inverse solution of 6-R serial robot mechanism[J].Journal of Beijing University of Aeronautics and Astronautics,2010,36(3):295-298(in Chinese).
[4] 尚国强,陈五一,韩先国,等.并联机床的球铰链设计与分析[J].机械技术史及机械设计,2008:286-290.SHANG G Q,CHEN W Y,HAN X G,et al.Spherical hinge design and analysis of parallel machine tool[J].Mechanical Technology and Mechanical Design,2008:286-290(in Chinese).
[5] REIS V L, DANIEL G B,CAVALCA K L.Dynamic analysis of a lubricated planar slider-crank mechanism considering friction and Hertz contact effects[J].Mechanism and Machine Theory,2014,74:257-273.
[6] ZHANG X C,ZHANG X M,CHEN Z.Dynamic analysis of a 3-RRR parallel mechanism with multiple clearance joints[J].Mechanism and Machine Theory,2014,78:105-115.
[7] BAI Z F,ZHAO Y.A hybrid contact force model of revolute joint with clearance for planar mechanical systems[J].International Journal of Non-Linear Mechanics,2013,48:15-36.
[8] JUNG K.Dynamic response of a revolute joint with clearance[J].Mechanism and Machine Theory,1995,31(1):121-134.
[9] PAYANDEH S,FARAZ A.Towards approximate models of coulomb frictional moments in:(I) revolute pin joints and (Ⅱ)spherical-socket ball joints[J].Journal of Engineering Mathematics,2001,35(403):283-296.
[10] 李新友,陈五一,韩先国.基于正交设计的3-RPS并联机构精度分析与综合[J].北京航空航天大学学报,2011,37(8):979-984.LI X Y,CHEN W Y,HAN X G.3-RPS parallel mechanism based on orthogonal design precision analysis and synthesis[J].Journal of Beijing University of Aeronautics and Astronautics,2011,37(8):979-984(in Chinese).
[11] KHAN A W,CHEN W Y.Systematic geometric error modeling for workspace volumetric calibration of a 5-axis turbine blade grinding machine[J].Chinese Journal of Aeronautics,2010,23(5):604-615.
[12] 瓦伦丁·L·波波夫.接触力学与摩擦学的原理及其应用[M].李强,等,译.北京:清华大学出版社,2011:169-170.VALENTIN L P.Contact mechanics and tribology principle application[M].LI Q,et al,translated.Beijing:Tsinghua University Press,2011:169-170(in Chinese).
[13] 王元淳,沃国纬.弹性力学[M].上海:上海交通大学出版社,1998:133-135.WANG Y C,WO G W.Elastic mechanics[M].Shanghai:Shanghai Jiao Tong University Press,1998:133-135(in Chinese).
[14] 刘鸿文.材料力学[M].北京:高等教育出版社,2005:34.LIU H W.Material mechanics[M].Beijing:Higher Education Press,2005:34(in Chinese).

转动副临界角分析及其在四连杆机构中的应用

Critical angle of revolute pin joint and its application in a four-bar mechanism

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 5

编辑推荐

Metrics

本文评价

[1]	徐维铮, 孔祥韶, 郑成, 吴卫国. 一种三阶WENO-Z格式改进方法[J]. 北京航空航天大学学报, 2017, 43(12): 2400-2405.
[2]	曹建峰, 胡松杰, 刘磊, 刘勇, 黄勇, 李培佳. “嫦娥二号”小行星探测试验定轨计算与分析[J]. 北京航空航天大学学报, 2014, 40(8): 1095-1101.
[3]	刘鹏, 蒙志君, 武哲. 基于DE算法的共轴直升机模型辨识及精度分析[J]. 北京航空航天大学学报, 2012, (7): 971-975.
[4]	李新友, 陈五一, 韩先国. 基于正交设计的3-RPS并联机构精度分析与综合[J]. 北京航空航天大学学报, 2011, 37(8): 979-984.
[5]	张广军, 魏振忠. 多视觉检测系统的世界坐标唯一全局标定方法[J]. 北京航空航天大学学报, 2006, 32(11): 1268-1272.