北京航空航天大学学报 ›› 2017, Vol. 43 ›› Issue (4): 654-659.doi: 10.13700/j.bh.1001-5965.2016.0272

• 论文 • 上一篇    下一篇

复杂产品系统模块化分解模型及应用研究

闫华锋1, 仲伟俊2   

  1. 1. 国网电力科学研究院, 南京 210003;
    2. 东南大学 经济管理学院, 南京 211189
  • 收稿日期:2016-04-07 出版日期:2017-04-20 发布日期:2016-06-29
  • 通讯作者: 闫华锋,E-mail:yhf_sgga@163.com E-mail:yhf_sgga@163.com
  • 作者简介:闫华锋 男,博士,研究员级高级工程师。主要研究方向:复杂产品系统技术与应用、技术创新管理。
  • 基金资助:
    国家自然科学基金(71071033)

Modular decomposition model of complex product system and its application

YAN Huafeng1, ZHONG Weijun2   

  1. 1. State Grid Electric Power Research Institute, Nanjing 210003, China;
    2. School of Economics and Management, Southeast University, Nanjing 211189, China
  • Received:2016-04-07 Online:2017-04-20 Published:2016-06-29

摘要: 模块化设计开发技术能够实现复杂产品系统(CoPS)的柔性制造,科学合理的模块化分解将会降低CoPS开发的管理难度和制造成本。在分析产品系统模块化理论的基础上,总结了CoPS的模块化处理流程,列举了CoPS的模块化分解原则,提出了CoPS的模块化分解程度的计算模型,研究并建立了系统模块化与企业绩效的相关性分析模型,并探索了模型的最佳应用实践。以电网广域监测分析控制系统(WARMAP)为例,论述了在影响因素众多的情况下,运用模块化分解模型进行计算后,WARMAP分解为4大功能模块,极大缩短了系统的研发周期,提高了研发质量,充分验证了模块化分解模型的有效性,以期为企业产品模块化设计提供理论指导和决策借鉴。

关键词: 复杂产品系统(CoPS), 创新研究, 模块化设计, 模块化分解模型, 电网广域监测分析控制系统(WARMAP)

Abstract: Modular design and development technology can realize flexible manufacturing of complex product system (CoPS), but inappropriate modular decomposition will increase managerial difficulty and manufacturing cost. Based on the analysis of the product system modularization theory, this paper summarizes the modular processing flow of the complex product system, lists the modular decomposition principle of CoPS, proposes the modular decomposition model and modular-enterprise performance correlation analysis model, and then uses the wide area moniting analysis protection-control (WARMAP) system as an example. This paper discusses that calculation by the modular decomposition makes the wide-area monitoring and analysis control system of power grid is divided into four functional models under the complex condition, which greatly shortens the development cycle of WARMAP system, improves the quality of research and development, verifies the validity of the modular decomposition model, and provides theoretical guidance and decision-making reference for enterprise product modular design.

Key words: complex product system (CoPS), innovation research, modular design, modular decomposition model, wide area moniting analysis protection-control (WARMAP)

中图分类号: 


版权所有 © 《北京航空航天大学学报》编辑部
通讯地址:北京市海淀区学院路37号 北京航空航天大学学报编辑部 邮编:100191 E-mail:jbuaa@buaa.edu.cn
本系统由北京玛格泰克科技发展有限公司设计开发