北京航空航天大学学报 ›› 2017, Vol. 43 ›› Issue (6): 1080-1084.doi: 10.13700/j.bh.1001-5965.2016.0420

• 论文 • 上一篇    下一篇

基于相关性分析的结构可靠性加严试验方法

马小兵, 章健淳, 赵宇   

  1. 北京航空航天大学 可靠性与系统工程学院, 北京 100083
  • 收稿日期:2016-05-19 出版日期:2017-06-20 发布日期:2016-11-16
  • 通讯作者: 马小兵,E-mail:maxiaobing@buaa.edu.cn E-mail:maxiaobing@buaa.edu.cn
  • 作者简介:马小兵 男,博士,副教授,硕士生导师。主要研究方向:可靠性试验评估与系统耐久性优化;章健淳 男,博士研究生。主要研究方向:可靠性统计;赵宇 男,博士,教授,博士生导师。主要研究方向:系统工程、质量管理。
  • 基金资助:
    国家自然科学基金(61473014,61471385)

Hardened test method of structural reliability based on correlation analysis

MA Xiaobing, ZHANG Jianchun, ZHAO Yu   

  1. School of Reliability and Systems Engineering, Beijing University of Aeronautics and Astronautics, Beijing 100083, China
  • Received:2016-05-19 Online:2017-06-20 Published:2016-11-16
  • Supported by:
    National Natural Science Foundation of China (61473014,61471385)

摘要: 针对传统结构可靠性试验的验证多是基于载荷应力和结构强度相互独立的假设问题,从应力和强度数据的相关性分析与度量出发,在二者均为正态随机变量的前提下,建立了一种基于Copula函数相关应力-强度干涉模型的结构可靠性加严试验验证方案设计方法。该方法结合Copula函数和应力-强度干涉模型实现相关条件下原可靠性指标与加严条件下可靠性指标的转化,适用于小样本情况下基于传统成败型试验方法评估其可靠性。研究结果表明:相比独立假设,应力和强度呈负相关时,会增加试验样本量且样本量随负相关程度减弱而减少;呈正相关时,会减少试验样本量且样本量随正相关程度增强而减少。

关键词: 应力-强度干涉模型, 加严试验, Copula函数, 试验样本量, 结构可靠性

Abstract: The traditional test verification of structural reliability is generally based on the independence assumption between loading stress and structural strength. Stating with the correlation analysis of stress and strength, we propose a hardened test method of structural reliability verification based on the stress-strength interference model with Copula correlation when loading and strength both follow the normal distribution. The method combines Copula functions with stress-strength interference model to achieve the transformation of the original reliability index and reliability index under the hardened condition, and the reliability is estimated by the traditional binomial distribution test under the condition of small sample. Compared with the independence assumption, the results show that the negative correlation between stress and strength leads to the increase of sample size and the sample size decreases with the decrease of negative correlation; the positive correlation leads to the decrease of sample size and the sample size decreases with the increase of positive correlation.

Key words: stress-strength interference model, hardened test, Copula function, test sample size, structural reliability

中图分类号: 


版权所有 © 《北京航空航天大学学报》编辑部
通讯地址:北京市海淀区学院路37号 北京航空航天大学学报编辑部 邮编:100191 E-mail:jbuaa@buaa.edu.cn
本系统由北京玛格泰克科技发展有限公司设计开发