整体叶盘叶片焊缝裂纹相控阵超声检测

doi:10.13700/j.bh.1001-5965.2016.0683

北京航空航天大学学报 ›› 2017, Vol. 43 ›› Issue (9): 1900-1908.doi: 10.13700/j.bh.1001-5965.2016.0683

整体叶盘叶片焊缝裂纹相控阵超声检测

马立印¹, 李洋¹, 周正干^1,2

1. 北京航空航天大学机械工程及自动化学院, 北京 100083;
2. 先进航空发动机协同创新中心, 北京 100083

收稿日期:2016-08-24 出版日期:2017-09-20 发布日期:2017-01-13
通讯作者: 周正干,E-mail:zzhenggan@buaa.edu.cn E-mail:zzhenggan@buaa.edu.cn
作者简介:马立印,男,硕士研究生;主要研究方向:超声无损检测技术;周正干,男,博士,教授,博士生导师;主要研究方向:超声及红外无损检测
基金资助:
国家自然科学基金（51375027）；工信部民用飞机专项科研项目（MJZ-G-2013-05）

Detection of welding crack in blisk blade based on ultrasonic phased array

MA Liyin¹, LI Yang¹, ZHOU Zhenggan^1,2

1. School of Mechanical Engineering and Automation, Beijing University of Aeronautics and Astronautics, Beijing 100083, China;
2. Collaborative Innovation Center for Advanced Aero-Engine(CICAAE), Beijing 100083, China

Received:2016-08-24 Online:2017-09-20 Published:2017-01-13
Supported by:
National Natural Science Foundation of China (51375027); Special Research Project of Civil Aircraft of Ministry of Industry and Telecommunications (MJZ-G-2013-05)

摘要/Abstract

摘要： 裂纹是线性摩擦焊整体叶盘结构制造过程中叶片焊缝区域常见的缺陷类型之一。由于叶片焊缝区域结构复杂且裂纹缺陷尺寸小，因此焊缝区域裂纹缺陷的检测难度大。为了满足新工艺的应用要求，研究了焊缝区域的相控阵超声全覆盖检测方法，建立了焊缝区域相控阵超声检测的有限元仿真模型，研究了裂纹特征参数和声束聚焦点位置对检测方案的影响，验证了检测方案的可行性与正确性。构建了机器人化的相控阵超声检测系统，模拟了声束在线性摩擦焊叶片试样中的传播过程，实现了对叶片中预制裂纹缺陷的识别。研究结果表明，设计的检测方案能够满足叶片快速检测的要求。

关键词: 相控阵超声检测, 叶片, 线性摩擦焊, 裂纹, 有限元仿真

Abstract: Crack is a type of common defect in welding area of blade appearing in the process of blisk manufacture. Due to the complex structure of welding area in blade and the small size of crack defect, it is difficult to detect the welding crack. In order to satisfy the application requirement of this new process, a completely covered testing method, based on ultrasonic phased array inspection technique, to welding area was proposed. Finite element simulation models for phased array testing of welding area were built. The effects of crack parameters and ultrasonic beam focal position on the detection program were researched to testify the feasibility and validity of the detection program. A roboticized phased array ultrasonic testing system was established to simulate the propagation of ultrasonic beam in linear friction welding blade specimen and to achieve the recognition of prefabricated crack defects. The research results show that the proposed detection program can fulfill the requirement of rapid detection for linear friction welding blisk blade.

Key words: ultrasonic phased array detection, blade, linear friction welding, crack, finite element simulation

中图分类号:

V250.2
TB553

马立印, 李洋, 周正干. 整体叶盘叶片焊缝裂纹相控阵超声检测[J]. 北京航空航天大学学报, 2017, 43(9): 1900-1908.

MA Liyin, LI Yang, ZHOU Zhenggan. Detection of welding crack in blisk blade based on ultrasonic phased array[J]. JOURNAL OF BEIJING UNIVERSITY OF AERONAUTICS AND A, 2017, 43(9): 1900-1908.

参考文献

[1] 刘杰,郑宁,徐朋飞,等.整体叶盘结构叶片弹性变形规律及其对风扇气动性能的影响[J].科学技术与工程,2014,14(34):302-306.LIU J,ZHENG N,XU P F,et al.Blade flexibility deformation pattern of the blisk structure and it's influence on the aerodynamic performance of fan[J].Science Technology and Engineering,2014,14(34):302-306(in Chinese).
[2] YANG Y H,LIU D,LUO Z J.Microstructure homogeneity evaluation for TC11 blisk forging using loss function based on Taguchi method[J].Rare Metal Materials and Engineering,2011,401(4):565-570.
[3] KLOCKE F,SCHMITT R,ZEIS M,et al.Technological and economical assessment of alternative process chains for blisk manufacture[J].Procedia CIRP,2015,35:67-72.
[4] RAVI-KUMAR B V R.A review on blisk technology[J].International Journal of Innovative Research in Science,Engineering and Technology,2013,2(5):1353-1358.
[5] 张海燕,张连锋.航空发动机整体叶盘制造技术国内外发展概述[J].航空制造技术,2013(23):38-41.ZHANG H Y,ZHANG L F.Development overview of aeroengine integral blisk and its manufacturing technology at home and abroad[J].Aeronautical Manufacturing Technology,2013(23):38-41(in Chinese).
[6] 朱瑞峰,白钢,苏利龙,等.线性摩擦焊及其研究应用现状[J].热加工工艺,2009,38(9):100-103.ZHU R F,BAI G,SU L L,et al.Research and application of linear friction welding[J].Hot Working Technology,2009,38(9):100-103(in Chinese).
[7] 杨剑赟.钛合金线性摩擦焊塑性流动对焊缝成形影响[D].南昌:南昌航空大学,2012:25-30.YANG J Y.The influence of plastic flow on the weld formation of linear friction welding for titanium alloy[D].Nanchang:Nanchang Hangkong University,2012:25-30(in Chinese).
[8] Technical Committee of American Society for Testing and Materials.Standard reference radiographs of investment steel castings for aerospace applications:ASTM E192-2004[S].Philadelphia:ASTM,2004:1-4.
[9] 靳世久,杨晓霞,陈世利,等.超声相控阵检测技术的发展及应用[J].电子测量与仪器学报,2014,28(9):925-934.JIN S J,YANG X X,CHEN S L,et al.Development and application of ultrasonic phased array inspection technology[J].Journal of Electronic Measurement and Instrumentation,2014,28(9):925-934(in Chinese).
[10] KOMURA I,NAGAI S,KASHIWAYA H,et al.Improved ultrasonic testing by phased array technique and its application[J].Nuclear Engineering and Design,1985,87:185-191.
[11] MACNAB A,CAMPBELL M J.Ultrasonic phased arrays for nondestructive testing[J].NDT International,1987,6(20):333-337.
[12] 常文爽.低压汽轮机叶轮轮缘裂纹的超声相控阵检测[D].天津:天津大学,2012:25-36.CHANG W S.Ultrasonic phased array testing of cracks in low-pressure turbine disc rim[D].Tianjin:Tianjin University,2012:25-36(in Chinese).
[13] CHARLESWORTH C.Phased array ultrasonic inspection of low-pressure steam turbine rotors-curved axial entry fir tree roots[J].Insight,2011,2(53):37-44.
[14] 郑辉,林树青.超声检测[M].2版.北京:中国劳动社会保障出版社,2008:36-43.ZHENG H,LIN S Q.Ultrasonic testing[M].2nd ed.Beijing:China Labour & Social Security Publishing House,2008:36-43(in Chinese).
[15] 李家伟,陈积懋.无损检测手册[M].北京:机械工业出版社,2002:157-163.LI J W,CHEN J M.Nondestructive testing manual[M].Beijing:China Machine Press,2002:157-163(in Chinese).
[16] 徐娜,何方成,周正干.基于动态孔径聚焦的L型构件相控阵超声检测[J].北京航空航天大学学报,2015,41(6):1000-1006.XU N,HE F C,ZHOU Z G.Ultrasonic phased array inspection of L-shaped components based on dynamic aperture focusing[J].Journal of Beijing University of Aeronautics and Astronautics,2015,41(6):1000-1006(in Chinese).

整体叶盘叶片焊缝裂纹相控阵超声检测

Detection of welding crack in blisk blade based on ultrasonic phased array

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	董虎, 林苗, 顾苏程, 曹毅, 李巍. 多向气动驱动器软体仿生舌弯曲状态的研究[J]. 北京航空航天大学学报, 2019, 45(9): 1882-1893.
[2]	陈迪, 李钰, 张亦波, 宋颖刚, 熊峻江. 双剪连接件及双耳连接耳片疲劳寿命估算的逐次累计求和算法[J]. 北京航空航天大学学报, 2019, 45(6): 1175-1184.
[3]	杨斌, 史开元, 袁廷璧, 肖德铭, 王侃, 李振海. 金属材料微裂纹取向与超声波和频非线性效应[J]. 北京航空航天大学学报, 2019, 45(4): 695-704.
[4]	王添, 席平, 胡毕富, 李吉星, 石晓飞. 面向气热耦合的涡轮叶片计算域模型建模方法[J]. 北京航空航天大学学报, 2019, 45(1): 74-82.
[5]	陈旻炜, 李敏, 陈伟民. 水平井多裂纹同步扩展的偏折分析[J]. 北京航空航天大学学报, 2019, 45(1): 99-108.
[6]	曹惠玲, 阚玉祥, 薛鹏. 应用支持向量回归机探索发动机VSV调节规律[J]. 北京航空航天大学学报, 2018, 44(7): 1371-1377.
[7]	姬芬竹, 张梦杰, 王瑞, 王岩, 杜发荣. 冲压空气涡轮叶片设计和气动性能数值模拟[J]. 北京航空航天大学学报, 2018, 44(7): 1387-1394.
[8]	孙晓娜, 贺小帆, 李玉海. 孔边倒角裂纹当量初始缺陷尺寸的确定方法[J]. 北京航空航天大学学报, 2018, 44(1): 187-195.
[9]	杨晓华, 刘学君, 张玎, 辛志东. 基于振动声调制的板类结构裂纹定位成像[J]. 北京航空航天大学学报, 2017, 43(8): 1509-1516.
[10]	谭翔飞, 何宇廷, 侯波, 崔荣洪, 冯宇. 腐蚀环境下铜薄膜传感器金属结构裂纹监测[J]. 北京航空航天大学学报, 2017, 43(7): 1433-1441.
[11]	倪奇峰, 侯安平, 刘若阳, 周拜豪, 张明明. 大攻角状态压气机分离流及叶片动力响应特性[J]. 北京航空航天大学学报, 2017, 43(7): 1410-1418.
[12]	王池权, 熊峻江, 马少俊, 陈勃. 航空铝合金材料腐蚀裂纹扩展性能试验[J]. 北京航空航天大学学报, 2017, 43(5): 935-941.
[13]	李矿, 熊峻江, 马少俊, 陈勃. 航空铝合金系列材料裂纹扩展性能的温度效应[J]. 北京航空航天大学学报, 2017, 43(4): 761-768.
[14]	范磊, 王少萍, 张超, 孔德贺, 毛阳. 直升机行星架疲劳裂纹扩展寿命预测[J]. 北京航空航天大学学报, 2016, 42(9): 1927-1935.
[15]	鲁龙坤, 王生楠, 王照, 宋恩鹏. 基于准静态拉伸试验的临界CTOA测量[J]. 北京航空航天大学学报, 2016, 42(9): 1936-1943.