3-PPP型柔性并联微定位平台的设计与分析

doi:10.13700/j.bh.1001-5965.2019.0286

北京航空航天大学学报 ›› 2020, Vol. 46 ›› Issue (4): 798-807.doi: 10.13700/j.bh.1001-5965.2019.0286

3-PPP型柔性并联微定位平台的设计与分析

王保兴¹, 孟刚¹, 林苗¹, 李巍², 曹毅^1,3

1. 江南大学机械工程学院, 无锡 21412;
2. 苏州工业职业技术学院, 苏州 215104;
3. 江苏省食品先进制造装备技术重点实验室, 无锡 214122

收稿日期:2019-06-10 发布日期:2020-04-21
通讯作者: 曹毅 E-mail:caoyi@jiangnan.edu.cn
作者简介:王保兴,男,硕士研究生。主要研究方向:柔性机构学;孟刚,男,硕士研究生。主要研究方向:柔性机构学;林苗,男,硕士研究生。主要研究方向:柔性机构学;李巍,男,博士。主要研究方向:软体机器人;曹毅,男,博士,教授。主要研究方向:并联机器人、混联机器人、柔性机器人、软体机器人。
基金资助:
江苏省“六大人才高峰”计划（ZBZZ-012）；高等学校学科创新引智计划（B18027）；江苏省研究生创新计划（SJCX18-0630，KYCX18-1846）

Design and analysis of a 3-PPP compliant parallel micro-positioning stage

WANG Baoxing¹, MENG Gang¹, LIN Miao¹, LI Wei², CAO Yi^1,3

1. School of Mechanical Engineering, Jiangnan University, Wuxi 21412;
2. Suzhou Vocational Institute of Industrial Technology, Suzhou 215104, China;
3. Jiangsu Key Laboratory of Advanced Food Manufacturing Equipment and Technology, Wuxi 214122, China

Received:2019-06-10 Published:2020-04-21
Supported by:
The Six Talent Peaks Project in Jiangsu Province (ZBZZ-012); "111" Project (B18027); Postgraduate Research and Practice Innovation Program of Jiangsu Provence (SJCX18-0630,KYCX18-1846)

摘要/Abstract

摘要： 为解决现有空间平动柔性并联微定位平台（CPMS）结构布局不紧凑，且多轴驱动时各运动副的寄生运动相互累加，导致平台耦合误差增大的问题。首先，设计了一种基于柔性薄板的分布柔度式3-PPP型柔性并联微定位平台。其次，通过结构优化减小了平台的体积，并消除了支链中移动副寄生运动的累加现象。然后，基于柔度矩阵法建立了平台的输入刚度理论模型，并采用有限元仿真验证了理论模型的正确性；同时计算了平台的固有频率，并探究了其与柔性薄板尺寸参数之间的关系。最后，将结构优化前后的平台通过有限元仿真进行了对比分析。结果表明：结构优化后平台的体积减小了67%，且平台在单轴和多轴驱动时均具有更优的运动解耦特性和输入输出一致性。

关键词: 柔性并联微定位平台(CPMS), 柔度矩阵, 耦合误差, 固有频率, 有限元仿真

Abstract: The structure layouts of the existing spatial translational compliant parallel micro-positioning stages are not compact, and the parasitic motion of each kinematic joint accumulates during multi-axis actuation, which leads to the augment of cross-axis coupling error. In order to solve these problems, first, a distributed-compliance 3-PPP spatial translational compliant parallel micro-positioning stage (CPMS) based on compliant sheet was designed. Secondly, the stage volume was reduced, and the parasitic motion accumulation phenomenon of kinematic joints in each limb was eliminated by the way of structure optimization. Then, the theoretical model of input stiffness was deduced through compliance matrix method. The validity of the theoretical model was proved by finite element simulation. Besides, the natural frequency of the CPMS was calculated, and the relationship between natural frequency of the CPMS and size parameters of compliant sheet was explored. Finally, comparative analysis of the CPMS before and after structure optimization was conducted by finite element simulation. The results show that the volume of the CPMS is reduced by 67% after structure optimization, and the CPMS has better kinematic decoupling characteristic and input output consistency in both single-axis and multi-axis actuation.

Key words: compliant parallel micro-positioning stage (CPMS), compliance matrix, coupling error, natural frequency, finite element simulation

中图分类号:

V414.5
TH122

王保兴, 孟刚, 林苗, 李巍, 曹毅. 3-PPP型柔性并联微定位平台的设计与分析[J]. 北京航空航天大学学报, 2020, 46(4): 798-807.

WANG Baoxing, MENG Gang, LIN Miao, LI Wei, CAO Yi. Design and analysis of a 3-PPP compliant parallel micro-positioning stage[J]. Journal of Beijing University of Aeronautics and Astronautics, 2020, 46(4): 798-807.

参考文献

[1] HOWELL L L.Compliant mechanisms[M].New York:John Wiley and Sons,2001:2-14.
[2] 张宪民,胡凯,王念峰,等.基于并行策略的多材料柔顺机构多目标拓扑优化[J].机械工程学报,2016,52(19):1-8.ZHANGXM,HUK,WANGNF,etal.Multi-objectivetopolo-gy optimization of multiple materials compliant mechanisms based on parallel strategy[J].Journal of Mechanical Engineering,2016,52(19):1-8(in Chinese).
[3] 周睿,周辉,桂和利,等.基于柔性铰链的二自由度微动平台分析及优化[J].北京航空航天大学学报,2018,44(9):199-207.ZHOU R,ZHOU H,GUI H L,et al.Analysis and optimization of 2-DoF micro-positioning stage based on flexible hinges[J].Journal of Beijing University of Aeronautics and Astronautics,2018,44(9):199-207(in Chinese).
[4] 于靖军,郝广波,陈贵敏,等.柔性机构及其应用研究进展[J].机械工程学报,2015,51(13):53-68.YU J J,HAO G B,CHEN G M,et al.State-of-art of compliant mechanisms and their applications[J].Journal of Mechanical Engineering,2015,51(13):53-68(in Chinese).
[5] PAOLO D G,ALVISE B,PIERLUIGI B.New MEMS tweezers for the viscoelastic characterization of soft materials at the microscale[J].Micromachines,2018,9(1):15-37.
[6] DSOUZA R D,NAVIN K P,THEODORIDIS T.Design fabrication and testing of a 2 DOF compliant flexural microgripper[J].Microsystem Technologies,2018,24(9):3867-3883.
[7] 曹毅,刘凯,桂和利,等.二自由度开口型空间夹持机构研究[J].机械工程学报,2018,54(11):94-101.CAO Y,LIU K,GUI H L,et al.The research of one two-degree-of-freedom spatial gripper with opening[J].Journal of Mechanical Engineering,2018,54(11):94-101(in Chinese).
[8] LIN C,WU Z H,REN Y H,et al.Characteristic analysis of unidirectional multi-driven and large stroke micro/nano-transmission platform[J].Microsystem Technologies,2017,23(8):3389-3400.
[9] ÖZKALE B,PARREIRA R,BEKDEMIR A,et al.Modular soft robotic microdevices for dexterous biomanipulation[J].Lab on a Chip,2019,19(5):778-788.
[10] LI C,WANG J,CHEN S C.Flexure-based dynamic-tunable five-axis nanopositioner for parallel nanomanufacturing[J].Precision Engineering,2016,45:423-434.
[11] YONG Y K,MOHEIMANI S O R,KENTON B J,et al.Invited review article:High-speed flexure-guided nanopositioning:Mechanical design and control issues[J].Review of Scientific Instruments,2012,83(12):121101.
[12] ZHU Z,TO S,ZHU W L,et al.Optimum design of a piezo-actuated triaxial compliant mechanism for nanocutting[J].IEEE Transactions on Industrial Electronics,2018,65(8):6362-6371.
[13] WATANABE S,ANDO T.High-speed XYZ-nanopositioner for scanning ion conductance microscopy[J].Applied Physics Letters,2017,111(11):113106.
[14] HAO G B.Towards the design of monolithic decoupled XYZ compliant parallel mechanisms for multi-function applications[J].Mechanical Sciences,2013,4(2):291-302.
[15] 李海洋,郝广波,于靖军,等.空间平动柔性并联机构的系统设计方法研究[J].机械工程学报,2018,54(13):57-65.LI H Y,HAO G B,YU J J,et al.Systematic approach to the design of spatial translational compliant parallel mechanisms[J].Journal of Mechanical Engineering,2018,54(13):57-65(in Chinese).
[16] TANG X Y,CHEN I M,LI Q.Design and nonlinear modeling of a large-displacement XYZ flexure parallel mechanism with decoupled kinematic structure[J].Review of Scientific Instruments,2006,77(11):115101.
[17] AWTAR S,USTICK J,SEN S.An XYZ parallel-kinematic flexure mechanism with geometrically decoupled degrees of freedom[J].Journal of Mechanisms and Robotics,2012,5(1):015001.
[18] LI Y M,XU Q S.Design and optimization of an XYZ parallel micromanipulator with flexure hinges[J].Journal of Intelligent and Robotic Systems,2009,55(4-5):377-402.
[19] YUE Y,GAO F,ZHAO X,et al.Relationship among input-force payload stiffness and displacement of a 3-DOF perpendicular parallel micro-manipulator[J].Mechanism and Machine Theory,2010,45(5):756-771.
[20] WANG N,ZHANG Z Y,ZHANG X M,et al.Optimization of a 2-DOF micro-positioning stage using corrugated flexure units[J].Mechanism and Machine Theory,2018,121:683-696.
[21] CHAO D H,ZONG G H,LIU R.Design of a 6-DOF compliant manipulator based on serial-parallel architecture[C]//2005 IEEE/ASME International Conference on Advanced Intelligent Mechatronics.Piscataway,NJ:IEEE Press,2005:765-770.
[22] KIM D,GWEON D G,SONG I,et al.Optimal design of a flexure hinge-based XYZ atomic force microscopy scanner for minimizing Abbe errors[J].Review of Scientific Instruments,2005,76(7):376-391.
[23] XU Q S,ZHU X B,DONG Z G,et al.Nonlinear modeling and analysis of compliant mechanisms with circular flexure hinges based on quadrature beam elements[J].Proceedings of the Institution of Mechanical Engineers,Part C:Journal of Mechanical Engineering Science,2019,233(9):3277-3285.
[24] LI Y M,WU Z G.Design analysis and simulation of a novel 3-DOF translational micromanipulator based on the PRB model[J].Mechanism and Machine Theory,2016,100:235-258.
[25] SHE Y,MENG D S,SU H J,et al.Introducing mass parameters to pseudo-rigid-body models for precisely predicting dynamics of compliant mechanisms[J].Mechanism and Machine Theory,2018,126:273-294.
[26] KOSEKI Y,TANIKAWA T,KOYACHI N,et al.Kinematic analysis of translational 3-DOF micro parallel mechanism using matrix method[J].IEEE/RSJ International Conference on Intelligent Robots and Systems,2000,1(3):786-792.
[27] TANG H,LI Y M.Design analysis and test of a novel 2-DOF nanopositioning system driven by dual mode[J].IEEE Transactions on Robotics,2013,29(3):650-662.
[28] 余跃庆,张亚涛,张绪平,等.柔顺微夹持机构理论分析与实验[J].农业机械学报,2018,49(11):393-398.YU Y Q,ZHANG Y T,ZHANG X P,et al.Theoretical analysis and experiment on compliant microgripper mechanism[J].Transactions of the Chinese Society for Agricultural Machinery,2018,49(11):393-398(in Chinese).
[29] HAO G B,LI H Y,KEMALCAN S,et al.Understanding coupled factors that affect the modelling accuracy of typical planar compliant mechanisms[J].Frontiers of Mechanical Engineering,2016,11(2):129-134.
[30] 杨志军,白有盾,陈新,等.基于应力刚化效应的动态特性可调微动平台设计新方法[J].机械工程学报,2015,51(23):153-159.YANG Z J,BAI Y D,CHEN X,et al.A new design method of dynamic characteristics adjustable micro motion stage based on tension stiffening[J].Journal of Mechanical Engineering,2015,51(23):153-159(in Chinese).
[31] XAVIER H,ROSS W,KONG X W.On a simplified nonlinear analytical model for the characterization and design optimization of a compliant XY micro-motion stage[J].Robotics and Computer-Integrated Manufacturing,2018,49:66-76.

3-PPP型柔性并联微定位平台的设计与分析

Design and analysis of a 3-PPP compliant parallel micro-positioning stage

RichHTML

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 10

编辑推荐

Metrics

本文评价

[1]	董虎, 林苗, 顾苏程, 曹毅, 李巍. 多向气动驱动器软体仿生舌弯曲状态的研究[J]. 北京航空航天大学学报, 2019, 45(9): 1882-1893.
[2]	周睿, 周辉, 桂和利, 董虎, 曹毅. 基于柔性铰链的二自由度微动平台分析及优化[J]. 北京航空航天大学学报, 2018, 44(9): 1982-1990.
[3]	宫金良, 贾国朋, 张彦斐. 多外力柔性微动机构输出位移求解方法[J]. 北京航空航天大学学报, 2018, 44(3): 429-436.
[4]	马立印, 李洋, 周正干. 整体叶盘叶片焊缝裂纹相控阵超声检测[J]. 北京航空航天大学学报, 2017, 43(9): 1900-1908.
[5]	张旭东, 邱志平, 李琦. 模糊变分原理在求解结构固有频率中的应用[J]. 北京航空航天大学学报, 2014, 40(12): 1773-1779.
[6]	金晶, 邢誉峰. 铁木辛柯梁固有振动频率的边界元解法[J]. 北京航空航天大学学报, 2012, (7): 976-980.
[7]	王前程, 陈云霞, 康锐. 加速度计加速退化机理模型建模方法[J]. 北京航空航天大学学报, 2012, 38(10): 1405-1409.
[8]	赵丽滨, 龙丽平,蔡庆云. 列车风致脉动力下声屏障的动力学性能[J]. 北京航空航天大学学报, 2009, 35(4): 505-508.
[9]	邱志平, 王晓军, 马一. 结构复固有频率区域的区间摄动法[J]. 北京航空航天大学学报, 2003, 29(5): 406-409.
[10]	张英世. 阶梯式单向矩形板的振动[J]. 北京航空航天大学学报, 2000, 26(4): 412-415.