北京航空航天大学学报 ›› 2021, Vol. 47 ›› Issue (9): 1908-1917.doi: 10.13700/j.bh.1001-5965.2020.0532

• 论文 • 上一篇    下一篇

环氧树脂基复合材料加筋板结构吸湿行为研究

喻健1,2, 何宇廷1,3, 冯宇1,3, 马斌麟1, 张腾1, 杨飞1,4   

  1. 1. 空军工程大学 航空航天工程学院, 西安 710038;
    2. 中国人民解放军94795部队, 南通 226500;
    3. 西北工业大学 航空学院, 西安 710072;
    4. 贵州航天天马机电科技有限公司, 遵义 563000
  • 收稿日期:2020-09-21 发布日期:2021-10-09
  • 通讯作者: 冯宇 E-mail:fynuaa@126.com
  • 基金资助:
    国家自然科学基金(51805538);陕西省高校科协青年人才托举计划(20190410);陕西省自然科学基础研究计划(2020JQ-476)

Moisture absorption behavior of epoxy resin matrix composite stiffened panel

YU Jian1,2, HE Yuting1,3, FENG Yu1,3, MA Binlin1, ZHANG Teng1, YANG Fei1,4   

  1. 1. Aeronautics and Astronautics Engineering College, Air Force Engineering University, Xi'an 710038, China;
    2. 94795 Troops of the Chinese People's Liberation Army, Nantong 226500, China;
    3. School of Aeronautics, Northwestern Polytechnical University, Xi'an 710072, China;
    4. Guizhou Aerospace Tianma Electromechanicals Co., Ltd., Zunyi 563000, China
  • Received:2020-09-21 Published:2021-10-09
  • Supported by:
    National Natural Science Foundation of China (51805538); Yong Talents Fund of University Association for Science and Technology in Shaanxi, China (20190410);Natural Science Basic Research Program of Shaanxi (2020JQ-476)

摘要: 环氧树脂基复合材料的性能对湿热环境敏感,掌握该材料所组成结构的吸湿行为对其实际应用具有重要意义。通过以碳纤维环氧树脂基复合材料层合板的non-Fickian吸湿模型为基础,建立环氧树脂基复合材料加筋板结构的non-Fickian吸湿模型,在70℃/85% RH湿热条件下开展加筋板结构的吸湿实验,对所建立模型进行验证,并与已有的加筋板吸湿模型进行对比,通过所建立模型给出了加筋板沿厚度方向的吸湿量分布规律。结果表明:所建立加筋板non-Fickian吸湿模型的计算结果与实验结果吻合良好,在整个吸湿阶段相对误差小于5%,模型的预测精度高于传统Fick模型。所建立的加筋板non-Fickian吸湿模型可用于环氧树脂基复合材料加筋板层合结构吸湿量的准确预测。

关键词: 复合材料, 加筋板结构, 吸湿行为, non-Fickian行为, 有限元仿真

Abstract: The properties of epoxy resin matrix composites are sensitive to hygrothermal environment, and it is of great significance to investigate the moisture absorption behavior of epoxy resin matrix composite structures for its practical application. Based on the non-Fickian moisture absorption model of carbon fiber epoxy resin matrix laminates, the non-Fickian moisture absorption model for the epoxy resin matrix stiffened panel was established, the moisture absorption experiments of stiffened panel were conducted under the condition of 70℃/85% RH, and the established model was verified. The proposed model was compared with the existing moisture absorption model further. Finally, the moisture absorption distribution of the typical stiffened panel along the thickness direction was given through the established model. The results show that the calculated results of the established non-Fickian moisture absorption model of the stiffened panel are in good agreement with the experimental results. The relative error of the moisture absorption through the entire moisture absorption stage is less than 5%, and the predictive accuracy of the model is higher than that of the traditional Fick model. The established non-Fickian moisture absorption model of stiffened panel can be used to accurately predict the absorbed moisture content of epoxy resin matrix composite stiffened panels.

Key words: composite, stiffened panel, moisture absorption behavior, non-Fickian behavior, finite element simulation

中图分类号: 


版权所有 © 《北京航空航天大学学报》编辑部
通讯地址:北京市海淀区学院路37号 北京航空航天大学学报编辑部 邮编:100191 E-mail:jbuaa@buaa.edu.cn
本系统由北京玛格泰克科技发展有限公司设计开发