北京航空航天大学学报 ›› 2004, Vol. 30 ›› Issue (08): 767-770.

• 论文 • 上一篇    下一篇

边界追踪及Freeman码在定量金相中的应用

于洋1, 刘二莉1, 周铁涛2, 刘培英2   

  1. 1. 北京航空航天大学 机械工程及自动化学院, 北京 100083;
    2. 北京航空航天大学 材料科学与工程学院, 北京 100083
  • 收稿日期:2003-04-21 出版日期:2004-08-31 发布日期:2010-09-21
  • 作者简介:于 洋(1978-),男,山东菏泽人,硕士生, freshyy@163.com.

Application of boundary-tracing and Freeman code in quantitative metallography

Yu Yang1, Liu Erli1, Zhou Tietao2, Liu Peiying2   

  1. 1. School of Mechanical Engineering and Automation, Beijing University of Aeronautics and Astronautics, Beijing 100083, China;
    2. School of Materials Science and Engineering, Beijing University of Aeronautics and Astronautics, Beijing 100083, China
  • Received:2003-04-21 Online:2004-08-31 Published:2010-09-21

摘要: 根据不同情况,对多相合金中的颗粒状第二相进行二值化、颗粒分割、孔洞填充以及滤波等一种或多种图像预处理,得到离散的多目标黑白二值图像.为了统计分析多个颗粒,提出了多目标边界追踪算法,利用八连通边界追踪得到的每个颗粒的唯一标志点及其边界的Freeman码,由此可以获得体积分数、周长、面积、形状因子、平均自由程等第二相的特征参数.实验结果表明,在完成要求的预处理工作之后,该算法在离散多目标统计中实用有效.

Abstract: The grainy second phase of multi-phase alloy was processed by various image pretreatments according to different conditions to obtain binary image of the discreet multi-object. These image pretreatments include two-value transformation, grain segmentation, hole-filling and filtering. To analyze the multi-object, a boundary tracing algorithm for multi-object was presented. With the algorithm, the Freeman code of every grain's boundary was produced by 8 direction boundary tracing, thus the second phase characteristic parameters, such as volume fraction, perimeter, area, shape factor, mean free path etc, were obtained. The experiment results show that the algorithm is effective for discreet multi-object analysis by having done the above-mentioned pretreatments.

中图分类号: 


版权所有 © 《北京航空航天大学学报》编辑部
通讯地址:北京市海淀区学院路37号 北京航空航天大学学报编辑部 邮编:100191 E-mail:jbuaa@buaa.edu.cn
本系统由北京玛格泰克科技发展有限公司设计开发