Cu-Zr-Ti块体非晶合金的形成及其力学性能

张涛; 门华; 云洁

Cu-Zr-Ti块体非晶合金的形成及其力学性能

北京航空航天大学材料科学与工程学院北京 100083

基金项目: 国家自然科学基金资助项目(50225103)

详细信息

中图分类号: TG 14
计量
- 文章访问数: 2800
- HTML全文浏览量: 124
- PDF下载量: 7
- 被引次数: 0
出版历程
- 收稿日期: 2004-04-28
- 网络出版日期: 2004-10-31

Formation and mechanical properties of Cu-Zr-Ti bulk glassy alloys

School of Materials Science and Engineering, Beijing University of Aeronautics and Astronautics, Beijing 100083, China

摘要

摘要: 在Cu-Zr-Ti的三元合金系中发现了具有高非晶合金形成能力的Cu₆₀Zr_40-xTix(x=5%~27.5%,x为原子数分数)合金,采用铜模铸造法制备了块体非晶合金,其过冷液体温度区间为38~65 K.在该合金系中具有最高非晶形成能力的成分范围为Cu₆₀Zr_40-xTix(x=7.5%~12.5%),其非晶形成临界直径为5 mm,是Cu-Zr-Ti三元非晶合金中迄今为止非晶形成能力最高的合金.Cu₆₀Zr_40-xTi_x(x=7.5%~12.5%)块体非晶合金的杨氏模量、压缩断裂强度、压缩塑性应变和硬度分别为80~114 GPa,1 730~1 865 MPa,0.3%~1.5%和Hv 693~Hv 824,并随Ti含量的增加而提高.同时具有高非晶形成能力、高强度及显著塑性变形能力的铜基块体非晶合金的发现对非晶合金的基础研究和高性能结构材料的开发具有重要意义.
- 铜基合金 /
- 力学性能 /
- 块体非晶合金 /
- 非晶形成能力 /
- 过冷液体
Abstract: Cu-base bulk glassy alloys with high glass-forming ability were fabricated in Cu-Zr-Ti ternary system by copper mold casting. The critical diameter for glass formation was 5 mm for Cu₆₀Zr_40-xTi_x(x=7.5%, 10%, 12.5%) alloys, 4 mm for Cu₆₀Zr₂₅Ti₁₅ alloy and 3 mm for Cu₆₀Zr_40-xTi_x(x=15%, 17.5%, 22.5%, 25%) alloys. The glassy alloys exhibited distinct glass transition together with supercooled liquid region in the range of 38~65 K. The Young’s modulus, compressive fracture strength, plastic strain and Vickers hardness of the bulk glassy alloys are in the range of 80~114 GPa, 1 730~1 865 MPa, 0.3%~1.5% and Hv 693~Hv 824, respectively, and increase with increasing Ti content in the alloys. The finding of the Cu-based bulk glassy alloys with high glass-forming ability, high fracture strength and distinct plastic strain indicates a possibility for subsequent development of glassy alloys with new compositions which can be used for structural materials.
- copper-base alloys /
- mechanical properties /
- bulk glassy alloys /
- glass-forming ability /
- supercooled liquid

HTML全文

参考文献(1)

[1] Inoue A, Zhang T, Masumoto T. Production of amorphous cylinder and sheet of La₅₅Al₂₅Ni₂₀ alloy by a metallic mold casting method [J]. Materials Transactions, JIM, 1990, 31:425~428 [2]Inoue A, Kato A, Zhang T, et al. Mg-Cu-Y amorphous alloys with high mechanical strengths produced by a metallic mold casting method [J]. Materials Transactions, JIM, 1991, 32:609~616. [3]Zhang T, Inoue A, Masumoto T. Amorphous Zr-Al-TM (TM = Co, Ni, Cu ) alloys with significant supercooled liquid region of over 100 K [J]. Materials Transactions, JIM, 1991, 32:1005~1010. [4]Peker A, Johnson W L. A highly processable metallic-glass— Zr_41.2Ti_13.8Cu_12.5 Ni_10.0Be_22.5[J]. Applied Physics Letters, 1993, 63:2342~2344 [5]Inoue A, Gook G S. Fe-based ferromagnetic glassy alloys with wide supecooled liquid region [J]. Materials Transactions, JIM, 1995, 36:1180~1182 [6]Inoue A. Bulk amorphous alloys with soft and hard magnetic properties. Materials Science and Engineering, 1997, A226-228:357~363 [7]Inoue A, Zhang T, Takeuchi A. Bulk amorphous alloys with high mechanical strength and good soft magnetic properties in Fe-TM-B (TM=IV-VIII group transition metal) system [J]. Applied Physics Letters, 1997, 71:464~466. [8]Inoue A, Nishiyama N, Matsuda T. Preparation of bulk glassy Pd₄₀Ni₁₀Cu₃₀P₂₀ alloy of 40 mm in diameter by water quenching [J]. Materials Transactions, JIM, 1996, 37:181~184 [9]Zhang T, Inoue A. Thermal and mechanical properties of Ti-Ni-Cu-Sn amorphous alloys with a wide supercooled liquid region before crystallization [J]. Materials Transactions, JIM, 1998, 39:1001~1006 [10] Zhang T, Inoue A. Preparation of Ti-Cu-Ni-Si-B amorphous alloys with a large supercooled liquid region [J]. Materials Transactions, JIM, 1999, 40:301~306 [11]Kim Y C, Kim W T, Kim D H. Glass forming ability and crystallization behavior in amorphous Ti₅₀Cu_32-xNi₁₅Sn₃Be_x(x = 0, 1, 3, 7) alloys [J]. Materials Transactions, 2002, 43:1243~1247 [12]Pang S J, Zhang T, Asami K, et al. Synthesis of Fe-Cr-Mo-C-B-P bulk metallic glasses with high corrosion resistance[J]. Acta Materialia, 2002, 50:489~497 [13]Zhang T, Inoue A. New bulk glassy Ni-based alloys with high strength of 3 000 MPa [J]. Materials Transactions, 2002, 43:708~711 [14]Inoue A, Zhang W, Zhang T. Thermal stability and mechanical strength of bulk glassy Ni-Nb-Ti-Zr alloys [J]. Materials Transactions, 2002, 43:1952~1956 [15]Zhang T, Inoue A. Bulk glassy alloys with low liquidus temperature in Pt-Cu-P system [J]. Materials Transactions, 2003, 44:1143~1146 [16]Ma C L, Ishihara S, Soejima H, et al. Formation of new Ti-based metallic glassy alloys [J]. Materials Transactions, 2004, 45:1802~1806. [17]Inoue A. Bulk amorphous alloys [M]. Trans Tech Publications, Zuerich, 1989 [18]Inoue A, Zhang W, Zhang T, et al. Thermal and mechanical properties of Cu-based Cu-Zr-Ti bulk glassy alloys[J]. Materials Transactions, 2001, 42:1149~1151 [19]Inoue A, Zhang W, Zhang T, et al. Formation and mechanical properties of Cu-Hf-Ti bulk glassy alloys [J]. Journal of Materials Research, 2001, 16:2836~2844 [20]Inoue A, Zhang T, Kurosaka K, et al. High-strength Cu-based bulk glassy alloys in Cu-Zr-Ti-Be system [J]. Materials Transactions, 2001, 42:1800~1804 [21]Zhang T, Kurosaka K, Inoue A. Thermal and mechanical properties of Cu-Zr-Ti-Y bulk glassy alloys [J]. Materials Transactions, 2001, 42:2042~2045 [22]Inoue A, Zhang W. Formation, thermal stability and mechanical properties of Cu-Zr-Al bulk glassy alloys [J]. Materials Transactions, 2001, 42:2921~2925 [23]Zhang T, Yamamoto T, Inoue A. Formation, thermal stability and mechanical properties of (Cu_0.6Zr_0.3Ti_0.1)_100-xM_x (M=Fe, Co, Ni) bulk glassy alloys [J].Materials Transactions, 2002, 43:3222~3226 [24]Inoue A, Zhang W. Formation and mechanical properties of Cu-Hf-Al bulk glassy alloys with a large supercooled liquid region of over 90 K [J]. Journal of Materials Research, 2003, 18:1435~1440 [25]Zhang Q S, Zhang H F, Deng Y F, et al. Bulk metallic glass formation of Cu-Zr-Ti-Sn alloys [J]. Scripta Materialia, 2003, 49:273~278 [26]Wang D, Li Y, Sun B B, et al. Bulk metallic glass formation in the binary Cu-Zr system [J]. Applied Physics Letters, 2004, 84:4029~4031 [27]Inoue A, Zhang W. Formation, thermal stability and mechanical properties of Cu-Zr and Cu-Hf binary glassy alloy rods [J]. Materials Transactions, 2004, 45:584~587 [28]Park E S, Chang H J, Kim D H, et al. Formation of amorphous phase in melt-spun and injection-cast Cu₆₀Zr₃₀Ti₁₀ alloys[J]. Scripta Materialia, 2004, 51:221~224 [29]Inoue A. High strength bulk amorphous alloys with low critical cooling rates (overview) [J]. Materials Transactions, JIM, 1995, 36:866~875 [30]Chen H S. Composition dependence of the glass transition temperature of Pd-Ni-P and Pt-Ni-P glasses [J]. Non-Crystalline Solids, 1973, 12:333~338 [31]Japan Institute of Metals. Metals databook [M]. Maruzen, Tokyo, 1993.8 [32]Boer F R, Boom R, Mattens W C M, et al. Cohesion in metals [M]. North-Holland, Amsterdam,1989.103~637

施引文献

资源附件(0)

访问统计