Microstructures and properties of a Mg-Li-Al-Zn wrought alloy
-
摘要: 根据Mg-Li二元合金相图及Al,Zn元素在合金中的作用,设计了一种新的β基变形镁锂合金(Mg-Li-Al-Zn),用光学显微镜和X射线衍射法对合金锻造、轧制和轧制退火态的组织及合金相进行了分析,结果表明该合金轧制退火态具有比较理想的组织.不同状态合金的拉伸性能表明,轧制退火态下合金具有最高的强度和屈强比,并具有较好的塑性.Abstract: A novel β base Mg-Li-Al-Zn wrought alloy was designed according as the Mg-Li binary phase diagram and effect of Al, Zn on the alloys. The microstructure and alloy phases changes of the alloy on the states of casting, forging, rolling and rolling-annealing were systematically investigated by optical microscope and X-Ray. The results show that the microstructure of as rolling-annealing is satisfying. The results from tensile test show that the alloy at the state after rolling and consequent heating at 220℃ with holding time of 2 hour has either the highest fracture strength or the highest ratio of the yield strength to fracture strength, meanwhile the plasticity is quite acceptable.
-
Key words:
- micro structure /
- heat treatment /
- Mg-Li wrought alloy /
- alloy phases
-
[1] Merzhanov A G. Self-propagating high-temperature synthesis:twenty years of search and findings . In:Munir Z A, Holt J B.Proceedings of Combustion and Plasma Synthesis of High-temperature Materials . New York:VCH Publishers, 1990.1~53 [2]Odawara O .Long ceramic-lined pipes produced by a centrifugal-thermit process[J]. Journal of American Ceramic Society, 1990,73(3):629~633 [3] 殷 声.燃烧合成[M].北京:冶金工业出版社,1999.219 Yin Sheng. Combustion synthesis[M]．Beijing:Metallurgical Industry Publishing House, 1999.219 (in Chinese) [4] 席文君.SHS-离心法制备不锈钢内衬复合钢管的研究 .北京:北京科技大学材料科学与工程学院,2000 Xi Wenjun, Stainless steel lined composite pipe prepared by centrifugal-SHS process . Beijing:School of Materials Science and Engineering, University of Science and Technology, 2000(in Chinese) [5] Xi Wenjun, Yin Sheng, Lai Hoyi. Stainless steel lined composite pipe prepared by centrifugal-SHS process[J]. Journal of Materials Science, 2000,35(2):45~49 [6]Erksson G. Thermodynamic studies of high temperature equilibria[J].Acta Chemica Scandinavica, 1971, 25:2651~2658 [7] 席文君,周和平.复杂铝热反应的平衡热力学分析[J].复合材料学报,2003,20(4):14~17 Wenjun Xi, Zhou Heping. Equilibrium thermodynamics analyses of a complex thermit reaction used for centrifugal-thermit process[J]. Acta Materiae Compositae Sinica, 2003,20(4):14~17(in Chinese) -
点击查看大图
计量
- 文章访问数: 3122
- HTML全文浏览量: 37
- PDF下载量: 1
- 被引次数: 0
下载:
