泡沫铜作为填充材料的相变储热实验

张涛; 余建祖

泡沫铜作为填充材料的相变储热实验

张涛,
余建祖

北京航空航天大学航空科学与工程学院, 北京 100083

基金项目: 航空科学基金资助项目(2004ZE51048); 教育部博士点基金资助项目(20040006012)

详细信息

中图分类号: TK 02
计量
- 文章访问数: 3048
- HTML全文浏览量: 273
- PDF下载量: 1405
- 被引次数: 0
出版历程
- 收稿日期: 2006-09-15
- 网络出版日期: 2007-09-30

Experiment of solid-liquid phase change in copper foam

School of Aeronautic Science and Engineering, Beijing University of Aeronautics and Astronautics, Beijing 100083, China

摘要

摘要: 对填充有泡沫铜的固-液相变储热装置进行了试验研究.采用纯度为98%的正21烷(C₂₁H₄₄)作为相变材料(PCM),通过抽真空灌注的方法将其灌注到泡沫铜内部,封装并作绝热处理后作为试验件.在进行储热试验时,用嵌入了加热棒的铝制底座模拟被散热件对试验件加热,利用探针式和贴片式铂电阻(pt100)测量试验件温度并通过数据采集仪进行采集.整理绘制了在不同加热功率下的温度时间曲线,讨论和分析了此装置的热性能,结果表明泡沫铜作为填充材料能明显改善相变储能装置的传热性能和内部温度均匀性.
- 泡沫铜 /
- 相变材料 /
- 石蜡 /
- 热性能
Abstract: The thermal performance of solid-liquid phase change thermal storage device which embedded with copper foam was investigated. The 98％ pure Heneicosane (C₂₁H₄₄) was used as the phase change material (PCM), and it was filled in the copper foam through a vacuuming procedure. The PCM and the copper foam were sealed and insulated to get the test vessel. An aluminum bed plate which embedded with heating rods was used to heat the test vessel, and the temperature of the vessel was measured by some plate-type and probe-type platinum-resistance thermocouples (pt100) and collected by a data acquisition unit. The temperature variation curves under various heating power were plotted and the results were discussed. Experimental results indicate that, the thermal conductivity and performance of the phase change thermal storage device is obviously improved while copper foam as a heat transfer enhancement.
- copper foam /
- phase change material (PCM) /
- paraffin wax /
- thermal performance

HTML全文

参考文献(1)

[1] 王爱华,梁新刚,任建勋．航天器短时大功率排热系统质量分析[J]．清华大学学报(自然科学版),2004,44(8):1130-1133 Wang Aihua, Liang Xingang, Ren Jianxun. Weight analysis of spacecraft heat rejection systems with high heat rejection rate [J]. Journal of Tsinghua University, 2004, 44(8):1130-1133(in Chinese) [2] 谢晓峰,陈爱英．新型蓄能技术-相变蓄能[J]．株洲师范高等专科学校学报,2003,8(5):13-17 Xie Xiaofeng, Chen Aiying. New technology of energy storage-phase change energy storage[J]. Journal of Zhuzhou Teachers College, 2003, 8(5):13-17(in Chinese) [3] 张寅平,胡汉东,孔祥东．相变储能——理论和利用[M]．合肥:中国科技大学出版社,1996:22-25 Zhang Yinping, Hu Handong, Kong Xiangdong. Phase change thermal storage—the theory and the using[M]. Hefei:University of Science and Technology of China Press, 1996:22-25(in Chinese) [4] Shanmugasundaram V, Brown J R, Yerkes K L. Thermal management of high heat-flux sources using phase chance materials:a design optimization procedure . AIAA-97-2451, 1997 [5] 曹建光,步柄根,李强,等．泡沫铝在相变储能装置中的应用卫星热控制技术研讨会论文集．北京:中国人民解放军总装备部卫星技术专业组,2003:297-305 Cao Jianguang, Bu Binggen, Li Qiang, et al. Application of aluminum-foam in the phase change storage device Satellite Thermal Control Technology Seminar Papers. Beijing:The PLA’s General Armament Department of Satellite Technologies Group, 2003:297-305(in Chinese) [6] 于英华,李智超,刘敬福．多孔泡沫铝性能研究现状及应用前景展望[J]．辽宁工程技术大学学报,2003,22(2):259-260 Yu Yinghua, Li Zhichao, Liu Jingfu. Research present situation and prospect for application on porous foam aluminum[J]. Journal of Liaoning Technical University, 2003, 22(2):259-260(in Chinese)

施引文献

资源附件(0)

访问统计