微量B和C对TiAl合金铸锭缩孔缩松的影响

高永; 杨莉莉; 郑立静; 张虎

微量B和C对TiAl合金铸锭缩孔缩松的影响

北京航空航天大学材料科学与工程学院, 北京 100191

详细信息

中图分类号: TG 292
计量
- 文章访问数: 3350
- HTML全文浏览量: 254
- PDF下载量: 1565
- 被引次数: 0
出版历程
- 收稿日期: 2009-12-11
- 网络出版日期: 2010-10-31

Influence of boron and carbon on the shrinkage defects of TiAl alloys

School of Materials Science and Engineering, Beijing University of Aeronautics and Astronautics, Beijing 100191, China

摘要

摘要: 采用真空感应磁悬浮熔炼合金、重力浇注入室温石墨模具的方法,分别制备了Ti-47Al-2Cr-2Nb,Ti-47Al-2Cr-2Nb-0.8B和Ti-47Al-2Cr-2Nb-0.1C 3种名义成分的铸锭.对铸锭进行成分分析并利用体视显微镜和扫描电子显微镜对铸锭的铸造收缩缺陷和组织进行分析.结果表明:Ti-47Al-2Cr-2Nb合金铸锭有很强的柱状晶生长趋势,在轴线附近区域形成分散的缩松;加入0.8%B(原子分数)后,铸锭的组织得到细化,并削弱了柱状晶生长趋势,收缩缺陷分布集中以大缩孔方式存在,显微缩松的密度和尺寸均降低.添加0.1%C(原子分数)后,铸锭的组织和缩孔缩松与Ti-47Al-2Cr-2Nb比均无明显变化.
- TiAl合金 /
- 微合金化 /
- 显微组织 /
- 缩孔缩松
Abstract: Alloys whose nominal compositions were Ti-47Al-2Cr-2Nb, Ti-47Al-2Cr-2Nb-0.8B and Ti-47Al-2Cr-2Nb-0.1C were vacuum induction skull melted. Ingots were produced by pouring the molten alloys into a room-temperature graphite mold. Chemical compositions of ingots obtained were analyzed respectively. Microstructure as well as shrinkage cavity and porosity were also investigated with stereo microscope and scanning electron microscope (SEM). The results indicate that Ti-47Al-2Cr-2Nb alloy shows an intense columnar-growth tendency, and shrinkage porosity distributes dispersedly in the center zone around axis of ingot. Microstructure is refined and the columnar-growth tendency is weaken with the addition of 0.8% boron (atomic fraction). Shrinkage porosity becomes more concentrated to form a cavity in the center zone of ingots, and the density and size of micro porosity also decrease. However, the addition of 0.1% carbon (atomic fraction) doesn-t result in any apparent effects in terms of shrinkage porosity or microstructure compared to ingots without any additive.
- TiAl alloys /
- microalloying /
- microstructure /
- shrinkage cavity and porosity

HTML全文

参考文献(1)

[1] Loria E A.Gamma titanium aluminides as prospective structural materials[J].Intermetallics,2000,8:1339-1345 [2] Lasalmonie A.Why is it so difficult to introduce them in gas turbine engines [J].Intermetallics,2006,14:1123-1129 [3] 林均品,陈国良.TiAl基金属间化合物的发展[J].中国材料进展,2009,28:31-37 Lin Junpin,Chen Guoliang.Development of TiAl intermetallic based compound[J].Matrerials China,2009,28:31-37(in Chinese) [4] Wu Xinhua.Review of alloy and process development of TiAl alloys[J].Intermetallics,2006,14:1114-1122 [5] Raymond J,Simpkins II,Michael P,et al.The effects of HIP pore closure and age hardening on primary creep and tensile property variations in a TiAl XDTM alloy with 0.1 wt% carbon[J].Materials Science and Engineering A,2007,463:208-215 [6] Liu K,Ma Y C,Gao M,et al.Single step centrifugal casting TiAl automotive valves[J].Intermetallics,2005,13:925-928 [7] Jovanovic M T.Microstructure and mechanical properties of precision cast TiAl turbocharger wheel[J].Journal of Materials Processing,2005,167:14-21 [8] 杨慧敏,苏彦庆,郭景杰,等.B元素对Ti-46Al和合金柱状晶组织的影响[J].金属学报,2008,44(10):1213-1218 Yang Huimin,Su Yanqing,Guo Jingjie,et al.Effects of B addition on the columnar structures of Ti-46Al and Ti-46Al-5Nb alloys[J].Acta Metallurgica Sinica,2008,44(10):1213-1218(in Chinese) [9] 苏彦庆,张莉,郭景杰.Hf、B耦合作用对Ti-46Al合金凝固组织演化的影响[J].特种铸造与有色合金,2009,29(4):295-298 Su Yanqing,Zhang Li,Guo Jingjie.Coupling effects of hafnium and boron additions on solidification structure evolution in Ti-46Al alloy[J].Special Casting & Nonferrous Alloys,2009,29(4):295-298(in Chinese) [10] 李书江,王艳丽,林均品,等.微量C,B对高铌合金显微组织与力学性能的影响[J].稀有金属材料与工程,2004,33(2):144-148 Li Shujiang,Wang Yanli,Lin Junpin,et al.Influence of C and B elements on structures and mechanical properties for high Nb containing TiAl alloy[J].Rare Metal Materials and Engineering,2004,33(2):144-148(in Chinese) [11] 董利民,崔玉友,杨锐.B和C对铸造TiAl基合金宏观和显微组织的影响[J].金属学报,2002,38:643-646 Dong Limin,Cui Yuyou,Yang Rui.Effects of B or C on the macro-and micro-structures of cast near gamma TiAl alloys[J].Acta Metallurgica Sinica,2002,38:643-646(in Chinese) [12] Godfrey A B.Grain refinement of a gamma-based titanium aluminide using microalloy additions. Birmingham:Interdisciplinary Research Centre in Materials,University of Birmingham,1996 [13] Cheng T T,Bate P S,Botten P R.Strain ageing and yield plateau phenomena in γ-TiAl based alloys containing boron[J].Sciripta Mater,1999,40:283-288 [14] Maziasz P J,Ramanujan R V,Liu C T.Effects of B and W alloying additions on the formation and stability of lamellar structure in two-phase γ-TiAl[J].Intermetallics,1997,5:83-95 [15] Melo M L N M,Rizzo E M S,Santos R G.Predicting dendrite arm spacing and their effect on microporosity formation in directionally solidified Al-Cu alloy[J].Journal of Material Science,2005,40:1599-1609

施引文献

资源附件(0)

访问统计