基于有限元3-RPS并联机床轻量化优化设计

张天明; 韩先国

基于有限元3-RPS并联机床轻量化优化设计

张天明^,,
韩先国

北京航空航天大学机械工程及自动化学院, 北京 100191

基金项目: 航空科学基金资助项目(20081651025); 北京市重点实验室资助项目

详细信息

作者简介:
张天明(1986-),男,江西上饶人,硕士生,ztianming2004@126.com.

通讯作者:
张天明

中图分类号: TH122
计量
- 文章访问数: 3174
- HTML全文浏览量: 37
- PDF下载量: 1103
- 被引次数: 0
出版历程
- 收稿日期: 2009-09-21
- 网络出版日期: 2010-11-30

Lightweight and optimal design for 3-RPS parallel kinematic machine based on finite element method

Zhang Tianming^,,
Han Xianguo

School of Mechanical Engineering and Automation, Beijing University of Aeronautics and Astronautics, Beijing 100191, China

More Information

Corresponding author: Zhang Tianming

摘要

摘要: 为了减轻3-RPS并联机床质量,提高其刚度,分别对静平台与支链进行了结构改进.采用连接单元模拟机床中运动副,对并联机床静刚度进行有限元分析.通过分析结果获得静平台的刚度薄弱环节、支链的变形及其对机床变形的影响规律.在静平台刚度薄弱处增加抵抗变形的筋板,并通过减小其框架尺寸的方式优化静平台结构.采用悬臂梁模型分析支链的变形,以支链质量和变形乘积最小对支链进行尺寸优化.改进后的并联机床质量显著减轻,机床变形明显减小.优化结果能够提高机床动态响应性能以及机床精度.
- 轻量化 /
- 并联机床 /
- 结构优化 /
- 有限元
Abstract: The structure of the base platform and the links were optimized in order to reduce the mass and increase the stiffness of the 3-RPS parallel kinematic machine(PKM). The static stiffness of the PKM was analyzed with finite element method, using connector in the simulation of kinematic pair. From the analysis, the parts of base platform with low stiffness were identified; the deformations of the links and how they affected the deformation of the PKM were obtained. Ribs largely resisting the deformation were added, and the frame size was reduced to optimize the base platform. Deformation of the link was calculated by using cantilever model, and the dimensions of the link were optimized by minimizing the product of mass and the deformation. After the optimization, the mass and deformation of PKM were significantly reduced. The result can greatly improve the dynamic response and accuracy of the PKM.
- lightweight /
- parallel kinematic machine /
- structure optimization /
- finite element method

HTML全文

参考文献(1)

[1] 汪劲松,黄田.并联机床:机床行业面临的机遇与挑战[J].中国机械工程,1999,10(10):1103-1107 Wang Jinsong,Huang Tian.Parallel machine tool:a forthcoming opportunity and challenge to the machine tool industry [J].China Mechanical Engineering,1999,10(10):1103-1107 (in Chinese) [2] 赵岭,陈五一,马建峰.高速机床工作台筋板的结构仿生设计[J].机械科学与技术,2008,27(7):871-875 Zhao Ling,Chen Wuyi,Ma Jianfeng.Structural bionic design of the stiffening ribs of the working table of a high-speed machine tool [J].Mechanical Science and Technology for Aerospace Engineering,2008,27(7):871-875 (in Chinese) [3] 谢黎明,李大明,沈浩,等.基于有限元分析的现场铣床横梁结构优化[J].组合机床与自动化加工技术,2008(9):37-39 Xie Liming,Li Daming,Shen Hao,et al.Optimum design of scene milling machine beam based on finite element analysis [J].Modular Machine Tool & Automatic Manufacturing Technique,2008(9):37-39 (in Chinese) [4] Huang Tian,Zhao Xingyu,David J W.Stiffness estimation of a tripod-based parallel kinematic machine [J].IEEE Transactions on Robotics and Automation,2002,18(1):50-58 [5] 李育文,张华,杨建新,等.6-UPS并联机床静刚度的有限元分析和实验研究[J].中国机械工程,2004,15(2):112-115 Li Yuwen,Zhang Hua,Yang Jianxin,et al.Finite element analysis and experimental study for the stiffness of a 6-UPS parallel kinematic machine [J].China Mechanical Engineering,2004,15(2):112-115(in Chinese) [6] 刘悦,汪劲松.基于轴承及导轨接触刚度的混联机床静刚度研究及优化[J].机械工程学报,2007,43(9):151-155 Liu Yue,Wang Jinsong.Static stiffness research and optimization on a hybrid machine tool considering the stiffness of bearings and guideways[J].Chinese Journal of Mechanical Engineering,2007,43(9):151-155(in Chinese)

施引文献

资源附件(0)

访问统计