超外差接收相敏检波在电磁超声检测中的应用

周正干; 黄凤英; 倪先胜

超外差接收相敏检波在电磁超声检测中的应用

北京航空航天大学机械工程及自动化学院, 北京 100191

基金项目: 国家自然科学基金资助项目(50971006)

详细信息

作者简介:
周正干(1967-),男,湖南湘潭人,教授,zzhenggan@buaa.edu.cn.

中图分类号: TB 533
计量
- 文章访问数: 3141
- HTML全文浏览量: 172
- PDF下载量: 1539
- 被引次数: 0
出版历程
- 收稿日期: 2010-07-06
- 网络出版日期: 2011-03-31

Application of super-heterodyne phase-sensitive detector in electromagnetic acoustic testing

School of Mechanical Engineering and Automation, Beijing University of Aeronautics and Astronautics, Beijing 100191, China

摘要

摘要: 为了提高电磁超声检测接收信号的信噪比,研究和设计了基于超外差接收正交相敏检波技术的电磁超声检测系统.应用该系统分别对铝合金、碳钢和不锈钢试样进行了检测,对接收信号进行了正交相敏检波处理,将处理后的信号同原始接收射频信号进行了对比,分析了中频放大器和相敏检波器中低通滤波器的带宽设置对检测结果的影响.研究结果表明:超外差接收正交相敏检波技术在铝合金、碳钢和不锈钢等非铁磁性或铁磁性金属材料的电磁超声检测中可以起到去噪、提高信噪比的作用.
- 电磁超声换能器 /
- 超外差接收 /
- 正交相敏检波
Abstract: In order to increase the signal-to-noise ratio of the electromagnetic acoustic received signal,an electromagnetic acoustic inspection system based on super-heterodyne receiver orthogonal phase-sensitive detection technique was designed and applied to inspect samples of aluminum, carbon steel and stainless steels. The received signal after being processed with the orthogonal phase-sensitive detection technology was compared with the received original radio frequency signal. The effects on the testing results of bandwidth settings in the intermediate frequency(IF) amplifier and the low-pass filter of phase-sensitive detector were analyzed. The results show that the application of orthogonal phase-sensitive detection technology in the inspection of aluminum alloy, carbon and stainless steels non-ferromagnetic or ferromagnetic metal materials can denoise from the received signal and increase the signal-to-noise ratio.
- electromagnetic acoustic transducer(EMAT) /
- super-heterodyne receiver /
- orthogonal phase-sensitive detection

HTML全文

参考文献(1)

[1] 王卓,陈鹏. 超声的电磁脉冲激发方式的探讨[J]. 声学技术,2008,20(4):529-532 Wang Zhuo,Chen Peng. Discussion on excitation of ultrasound by electromagnetic pulse[J]. Technical Acoustics,2008,20(4):529-532(in Chinese) [2] Boonsang S,Dewhurst R J.A sensitive electromagnetic acoustic transducer for picometer-scale ultrasonic displacement measurements[J].Sensors and Actuators A:Physical,2006,127(2):345-354 [3] 雷华明,阙沛文.电磁超声换能器的阻抗测试方法研究[J].仪表技术与传感器,2004(1):15-16 Lei Huaming,Que Peiwen.Electromagnetic ultrasonic transducer impedance testing method[J].Instrument Technique and Sensor,2004(1):15-16(in Chinese) [4] 郝宽胜,黄松岭,赵伟,等.电磁超声换能器新型线圈阻抗及匹配电容的计算[J].高技术通讯,2010,20(8):845-849 Hao Kuansheng,Huang Songling,Zhao Wei,et al.Calculation of coil impedance and matching capacitance for EMAT[J].Chinese High Technology Letters,2010,20(8):845-849(in Chinese) [5] 朱红秀,吴淼,刘卓然,等.电磁超声传感器(EMAT)最佳磁感应强度的研究[J].煤炭学报,2005,30(4):525-528 Zhu Hongxiu,Wu Miao,Liu Zhuoran,et al.Study on optimal magnetic induction intensity of electromagnetic acoustic transducer (EMAT)[J].Journal of China Coal Society,2005,30(4):525-528(in Chinese) [6] Gan T H,Ho K S,Billson D R.Application of pulse compression signal processing techniques to electromagnetic acoustic transducer for noncontact thickness measurements and imaging[J].Ameriacn Institute of Physics,2005,76(5):054902(1-8) [7] Matz V,mídr,Kreidl M,et al.Comparison of de-noising methods used for EMAT signals .Kirchwald:E-Journal of NDT,1996 .http://www.ndt.net/article/ecndt2006/doc/Tu.1.3.5.pdf [8] Petersen G L,Chick B B,Fortunko C M,et al.Resonance techniques and apparatus for elastic-wave velocity determination in thin metal plates[J].Review of Scientific Instruments,2009,65 (1):192-198 [9] Hirotsugu O,Goh S,Masahiko H,et al.Anisotropic elastic-stiffness coefficients of an amorphous Ni-P film[J].Journal of Applied Physics,2009,91(8):4857-4862 [10] 刘俊,张斌珍.微弱信号检测技术[M].北京:电子工业出版社,2005:87-88 Liu Jun,Zhang Binzhen.Weak signal testing technique[M].Beijing:House of Electronics Industry Publishing,2005:87-88(in Chinese) [11] 王学伟,王春歆,张玉叶.点目标图像信噪比计算方法[J].电光与控制,2010(1):18-21 Wang Xuewei,Wang Chunxin,Zhang Yuye.Research on SNR of point target image[J].Electronics Optics ＆ Control,2010(1):18-21(in Chinese)

施引文献

资源附件(0)

访问统计