三轴一体光纤陀螺高精度标定方法

张小跃; 杨功流; 张春熹

三轴一体光纤陀螺高精度标定方法

北京航空航天大学仪器科学与光电工程学院, 北京 100191

详细信息

中图分类号: V 241
计量
- 文章访问数: 2904
- HTML全文浏览量: 172
- PDF下载量: 656
- 被引次数: 0
出版历程
- 收稿日期: 2011-12-28
- 网络出版日期: 2012-04-30

High precision calibration method for three-cluster FOG

School of Instrument Science and Opto-electronics Engineering, Beijing University of Aeronautics and Astronautics, Beijing 100191, China

摘要

摘要: 针对三轴一体光纤陀螺,定义了标定转换模型,理论上分析了标定过程中各项参数之间相互影响以及地球转速影响导致标定精度较低的问题.针对零偏、标度因数和安装误差角提出一种各项分离测试的高精度标定方法,并将此方法实际应用于某三轴一体高精度光纤陀螺捷联系统,得到了陀螺标定结果.对标定结果进行了误差检验测试以及应用标定结果后进行了系统静、动态测试.测试结果表明:经过标定过程后陀螺精度以及系统测试结果均达到了预期性能要求,验证了标定方法的正确性和实用性.
- 光纤陀螺 /
- 标定 /
- 零偏 /
- 标度因数 /
- 失准角
Abstract: For three-cluster fiber optic gyro(FOG), calibration model was defined. The calibration error induced by earth rotation and interference among various parameters was analyzed theoretically. A high precision calibration method was presented, in which every parameter was tested separately, including bias, scale factor and misalignment. The calibration method was applied in a three-cluster FOG strapdown inertial navigation system(SINS), and the calibration result was given out. Error test for calibration result and SINS static test, dynamic test was carried out. The test results show that expected precision both of FOG and system performance have been achieved, the availability and utility of the calibration method are validated.
- fiber optic gyro(FOG) /
- calibration /
- bias /
- scale factor /
- misalignment

HTML全文

参考文献(6)

[1]	张炎华,王立端,战兴群,等.惯性导航技术的新进展及发展趋势[J].中国造船,2008,49(183):134-144 Zhang Yanhua,Wang Liduan,Zhan Xingqun,et al.The new advancement and trend of inertial navigation technology[J].Shipbuilding of China, 2008,49(183):134-144(in Chinese)
[2]	王新龙,马闪.光纤陀螺温度与标度因数非线性建模与补偿[J].北京航空航天大学学报,2009,35(1):28-31 Wang Xinlong,Ma Shan.Nonlinearity of temperature and scale factor modeling and compensating of FOG[J].Journal of Beijing University of Aeronautics and Astronautics,2009,35(1):28-31(in Chinese)
[3]	GJB 2426A-2004 光纤陀螺仪测试方法[S] GJB 2426A-2004 Test methods for fiber optic gyroscope[S](in Chinese)
[4]	Bar-Itzhack I Y,Harman R R.Implicit and explicit spacecraft gyro calibration[R].AIAA-2004-5343,2004
[5]	陈雪芹,耿云海.一种利用星敏感器对陀螺进行在轨标定的算法[J].系统工程与电子技术,2005,27(12):2112-2116 Chen Xueqin,Geng Yunhai.On-orbit calibration algorithm with star sensors of gyros[J].Systems Engineering and Electronics,2005,27(12):2112-2116(in Chinese)
[6]	贾大玲,李连仲,严卫钢.基于星敏感器的弹载陀螺工具误差分离研究[J].计算机仿真,2006,23(2): 40-43 Jia Daling,Li Lianzhong,Yan Weigang.Missile borne gyroscope error separation based on star-sensor[J].Computer Simulation,2006,23(2):40-43(in Chinese)