控制力矩陀螺框架高精度周期随动控制

徐向波; 李海涛; 薛立娟; 杨莲慧

控制力矩陀螺框架高精度周期随动控制

北京航空航天大学仪器科学与光电工程学院, 北京 100191

基金项目: 国家973计划资助项目(2009CB724000)

详细信息

中图分类号: TP 271
计量
- 文章访问数: 1908
- HTML全文浏览量: 273
- PDF下载量: 588
- 被引次数: 0
出版历程
- 收稿日期: 2011-05-13
- 网络出版日期: 2012-08-30

High precision periodic control method of control moment gyro gimbal system

School of Instrument Science and Opto-electronics Engineering, Beijing University of Aeronautics and Astronautics, Beijing 100191, China

摘要

摘要: 为实现控制力矩陀螺框架伺服系统的高精度周期随动控制,采用比例积分微分(PID,Proportion Integration Differentiation)控制器结合重复控制器的控制方式,PID控制器实现框架伺服系统静态和匀速运动的高精度控制,插入式重复控制器实现对周期性输入信号的精确跟踪.对控制力矩陀螺框架系统进行了建模,设计了PID控制器与插入式重复控制器,并分析了重复控制器的稳定性条件、稳态跟踪性能和对扰动的抑制能力.仿真结果和实验结果表明:采用插入式重复控制器使控制力矩陀螺跟踪1Hz给定速度信号时的稳态跟踪误差大幅减少.PID控制器结合插入式重复控制器结构简单,两者可分开独立设计,参数设计容易.
- 控制力矩陀螺 /
- 周期随动控制 /
- 插入式重复控制器 /
- 稳态跟踪误差
Abstract: In order to realize high periodic precision control of control moment gyro (CMG) gimbal system, a controller consisted of proportiona integration differention (PID) controller and plug-in repetitive controller was adopted. PID controller can realize high precision control of static state and uniform speed state, while plug-in repetitive controller can realize accurate tracking of periodic given signal. CMG gimbal system modeling was performed, and the PID controller and plug-in repetitive controller were designed, then stability conditions, steady tracking properties and ability of suppressing disturbance were analyzed. Simulation and experiment results show plug-in repetitive controller can effectively reduce steady tracking error when CMG gimbal system tracks a 1Hz periodic given velocity signal. The structure of the controller is simple and the plug-in repetitive controller can be designed separated from system’s PID controller, so it is easy to design parameters.
- control moment gyro /
- periodic control /
- plug-in repetitive controller /
- steady tracking error

HTML全文

参考文献(11)

[1]	魏彤,房建成.磁悬浮控制力矩陀螺磁轴承的变工作点线性化自适应控制方法[J].机械工程学报,2007,43(6):110-115 Wei Tong,Fang Jiancheng.Adaptive control based on variant operatingpoint linearization in magnetic bearings of MSCMG [J].Chinese Journal of Mechanical Engineering,2007,43(6):110-115(in Chinese)
[2]	徐向波,房建成.基于角加速度的陀螺框架伺服系统干扰观测器[J].北京航空航天大学学报,2009,35(6):669-672 Xu Xiangbo,Fang Jiancheng.Disturbance observer based on angular acceleration for gyro gimbal servo system [J].Journal of Beijing University of Aeronautics and Astronautics,2009,35(6):669-672(in Chinese)
[3]	刘金琨.先进PID控制MATLAB仿真[M].2版.北京:电子工业出版社,2004:55-58 Liu Jinkun.Advanced PID control and MATLAB simulation[M].2nd ed .Beijing:Publishing House of Electronics Industry,2004:55-58(in Chinese)
[4]	李建文,刘刚,李红.磁悬浮控制力矩陀螺框架伺服系统前馈补偿模糊控制方法[J].微电机,2009,42(5):35-42 Li Jianwen,Liu Gang,Li Hong.Fuzzy control method of gimbal servo system in magnetically suspended rotor system of CMG [J].Micromotor,2009,42(5):35-42(in Chinese)
[5]	Cao Zhenwei,Ledwich G F.Adaptive repetitive control to track variable periodic signals with fixed sampling rate [J].IEEE Transactions on Mechatronics,2002,7(3):378-384
[6]	马菲.重复控制在DVD机伺服系统中的研究与应用 .上海:上海交通大学自动化系,2008 Ma Fei.Research and application of repetitive control on DVD tracking servo system .Shanghai:Department of Automation,Shanghai Jiao Tong University,2008(in Chinese)
[7]	Demirel B,Güvenc L.Paramenter space design of repetitive controller for satisfying a robust performance requirement [J].IEEE Transactions on Automatic Control,2010,55(8):1893-1898
[8]	Park S W,Jeong J,Yang H S,et al.Repetitive controller design for minimum track misregistration in hard disk drives [J].IEEE Transactions on Magnetics,2005,41(9):2522-2527
[9]	Tsai M C,Yao W S.Design of a plug-in type repetitive controller for periodic inputs [J].IEEE Transactions on Control Systems Technology,2002,10(4):547-555
[10]	Yao W S ,Tsai M C .Analysis and estimation of tracking errors of plug-in type repetitive control systems[J].IEEE Transactions on Automatic Control,2005,50(8):1190-1195
[11]	Wu X H ,Xu J X .Design of a plug-in type repetitive control scheme for eliminating supplyside current harmonics of three-phase PWM boost rectifiers under generalized supply voltage conditions [J].IEEE Transactions on Power electronics,2010,25(7):1800-1810