用反圆环面刀加工变曲率过渡曲面原理

黄魏; 陈志同; 陈五一; 贺英

用反圆环面刀加工变曲率过渡曲面原理

北京航空航天大学机械工程及自动化学院, 北京 100191

基金项目: 国家自然科学基金资助项目(50875012); 航空科学基金资助项目(08B51017)

详细信息

中图分类号: TP 391
计量
- 文章访问数: 2031
- HTML全文浏览量: 221
- PDF下载量: 600
- 被引次数: 0
出版历程
- 收稿日期: 2009-12-29
- 网络出版日期: 2012-08-30

Principle of machining variant curvature blending surfaces with counter torus cutter

School of Mechanical Engineering and Automation, Beijing University of Aeronautics and Astronautics, Beijing 100191, China

摘要

摘要: 基于宽行加工理论和广域曲率吻合原则,提出一种利用圆环面内侧作为刀具工作面的反圆环面刀具宽行加工叶片进排气边的新方法.该方法通过优化刀具摆角使具有定母圆半径刀具工作面的包络面充分逼近叶片进排气边曲面,从而使刀具能在给定的精度范围内以最大行宽和最少刀轨行数加工出进排气边.最后,以某型号发动机叶片的进气边为例进行了加工实验.结果表明该方法能够大幅提高进排气边的加工质量,且反圆环面刀的加工行宽比球头刀提高了5倍.
- 变曲率 /
- 过渡曲面 /
- 叶片进排气边 /
- 反圆环面刀 /
- 宽行加工 /
- 广域曲率吻合
Abstract: Based on the stripe-width-maximization machining theory and the principle of global curvature fitting, a novel counter torus cutter, which uses the inner surface of torus as the cutting edge, was proposed to machine the leading and trailing edge of a turbine blade. Through optimizing the raw angle of the counter torus cutter with a circular generatrix of given radius, the envelope surface of the tool can closely approximate the leading and trailing edge surface of the turbine blade with variant curvature, which can be machined by maximizing the machining strip width and minimizing the number of tool paths under a given tolerance. An experiment to machine the leading and trailing edge of an aero-engine turbine blade was carried out. Results illustrate that the proposed method could greatly improve the machining quality of the leading and trailing edge, and the machining strip-width using a counter torus cutter is 5 times larger than that using a ball nose cutter.
- variant curvature /
- blending surfaces /
- leading and trailing edges of turbine blades /
- counter torus cutter /
- strip-width maximization machining /
- global curvature fitting

HTML全文

参考文献(14)

[1]	周济,周艳红.数控加工技术[M].北京:国防工业出版社,2002:46-47 Zhou Ji,Zhou Yanhong.Technology of NC machining[M].Beijing:National Defence Industry Press,2002:46-47(in Chinese)
[2]	Hamakhan I A,Korakianitis T.Aerodynamic performance effects of leading-edge geometry in gas-turbine blades[J].Applied Energy,2010,87(5):1591-1601
[3]	Kim B H,Choi B K.Guide surface based tool path generation in 3-axis milling:an extension of the guide plane method[J].Computer Aided Design,2000,32:191-199
[4]	Lee E.Contour offset approach to spiral tool path generation with constant scallop height[J].Computer Aided Design,2003,35:511-518
[5]	Sun Y W,Guo D M,Jia Z Y.Spiral cutting operation strategy for machining of sculptured surfaces by conformal map approach[J].Journal of Material Process Technology,2006,180:74-82
[6]	Kruth P,Klewais J P.Optimization and dynamic adaptation of the cutter inclination during five-axis milling of sculptured surfaces[J].CIRP Annals,1994,43(1):443-448
[7]	Shan C W,Zhang D H,Liu W W,et al.A novel spiral machining approach for blades modeled with four patches[J].Internal Journal of Advanced Manufacturing Technology,2009,43:563-572
[8]	You C F,Sheen B T,Lin T K.Robust spiral tool-path generation for arbitrary pockets[J].Internal Journal of Advanced Manufacturing Technology,2001,17:181-188
[9]	伊宗М X.燃气涡轮发动机叶片的机械加工[M].北京:国防工业出版社,1965 Yi Zong M X.Machining of gas twrbine engine blades[M].Beijing:Natinal Defence of Industry Press,1965(in Chinese)
[10]	Chiou C J,Lee Y S.A shape-generating approach for multi-axis machining G-buffer models[J].Computer-Aided Design,1999(31):761-776
[11]	Yoon Jounghahn,Pottmann Helmut,Lee Yuanshin.Locally optimal cutting positions for 5-axis sculptured surface machining[J].Computer-Aided Design,2003,35:69-81
[12]	张洪.从增大行距宽度减小波纹度的角度看型面加工发展的方向 .北京:北京航空学院制造工程系,1982 Zhang Hong.Observing the development of machining sculptured surfaces from the perspective of increasing strip width and decreasing waviness .Beijing:Manufacturing Engineering Department,Beijing Institute of Aeronautics,1982(in Chinese)
[13]	吕雪丽,张洪.广域曲率吻合原则与复杂曲面数控加工的全面优化[J].机械设计与制造,2003,10(5):94-96 Lü Xueli,Zhang Hong.Principle of global curvature fitting and global optimization of sculptured surface NC machining[J].Machinery Design and Machining,2003,10(5):94-96(in Chinese)
[14]	Yu Guang.General tool correction for five-axis milling[J].International Journal of Advanced Manufacturing Technology,1995,10(5):374-378