留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

基于驻留时间比的近地空间碎片环境建模

申敬松 刘也 胡松杰 韩潮

申敬松, 刘也, 胡松杰, 等 . 基于驻留时间比的近地空间碎片环境建模[J]. 北京航空航天大学学报, 2014, 40(11): 1512-1517. doi: 10.13700/j.bh.1001-5965.2013.0716
引用本文: 申敬松, 刘也, 胡松杰, 等 . 基于驻留时间比的近地空间碎片环境建模[J]. 北京航空航天大学学报, 2014, 40(11): 1512-1517. doi: 10.13700/j.bh.1001-5965.2013.0716
Shen Jingsong, Liu Ye, Hu Songjie, et al. Space debris environment modeling in low earth orbit based on resident time ratio[J]. Journal of Beijing University of Aeronautics and Astronautics, 2014, 40(11): 1512-1517. doi: 10.13700/j.bh.1001-5965.2013.0716(in Chinese)
Citation: Shen Jingsong, Liu Ye, Hu Songjie, et al. Space debris environment modeling in low earth orbit based on resident time ratio[J]. Journal of Beijing University of Aeronautics and Astronautics, 2014, 40(11): 1512-1517. doi: 10.13700/j.bh.1001-5965.2013.0716(in Chinese)

基于驻留时间比的近地空间碎片环境建模

doi: 10.13700/j.bh.1001-5965.2013.0716
基金项目: 空间碎片专项资助项目(K010410-4/5)
详细信息
    作者简介:

    申敬松(1973-),男,吉林白城人,高级工程师,shenjingsong@bacc.org.cn

    通讯作者:

    刘也

  • 中图分类号: V520

Space debris environment modeling in low earth orbit based on resident time ratio

  • 摘要: 为分析近地空间碎片的分布规律,提出了一种以碎片在空间网格内驻留时间为基础的碎片环境统计建模方法.该方法利用多项式拟合和求根方法统计碎片在空间网格内的停留时间,获取模型基础数据,并据此采用多项式预测、插值和时间序列分析等技术,综合分析空间碎片的分布与演化规律.给出了一个基于双行根数(TLE,Two Line Elements)数据的建模实例,该实例通过了ORDEM2000模型的对比验证,并获得了一些更精细的近地空间碎片环境特征.所得建模方法和分析结论可为长期运行的近地航天器轨道设计、碰撞风险评估及防护等提供技术支撑.

     

  • [1] 王海福,冯顺山,刘有英.空间碎片导论[M].北京:科学出版社,2010 Wang Haifu,Feng Shunshan,Liu Youying.Introduction of space debris[M].Beijing:Science Press,2010(in Chinese)
    [2] Johnson N L.History of on-orbit satellite fragmentations[R].NASA/TM-2008-214779,2008
    [3] 彭科科.空间碎片环境探测数据处理方法及工程模型建模方法研究[D].哈尔滨:哈尔滨工业大学,2010 Peng Keke.Research on sapce debris environment exploration data processing measure and engineering modeling method[D].Harbin:Harbin Institute of Technology,2010(in Chinese)
    [4] 张平平.近地轨道空间碎片轨道参数分布规律研究[D].哈尔滨:哈尔滨工业大学,2006 Zhang Pingping.Research on space debris orbital parameter distribution uule in LEO[D].Harbin:Harbin Institute of Technology,2006(in Chinese)
    [5] 唐颀,庞宝君,张伟.空间碎片环境工程模式参数分析[J].中国空间科学技术,2004,24(5):22-27 Tang Qi,Pang Baojun,Zhang Wei.Analysis of the parameters in space debris environment engineering model[J].Chinese Space Science and Technology,2004,24(5):22-27(in Chinese)
    [6] Fukushige S,Akahoshi Y,Kitazawa Y.Comparison of debris environment models:ORDEM2000,MASTER2001 and MASTER2005[J].IHI Engineering Review,2007,40(1):31-41
    [7] Liou J C.The new NASA orbital debris engineering model [R].ORDEM2000,NASA/TP-2002-210780,2002
    [8] Liou J C.NASA's ORDEM2010 status[C]//28th Inter-agency Debris Coordination Committee Meeting(IADC).Trivandrum,India:NASA,2010:1-20
    [9] 王海福,余庆波,刘有英.空间碎片碰撞风险评估系统[J].北京理工大学学报,2008,28(12):1039-1042 Wang Haifu,Yu Qingbo,Liu Youying.Orbital debris risk assessment system[J].Transactions of Beijing Institute of Technology,2008,28(12):1039-1042(in Chinese)
    [10] Xu X L,Xiong Y Q.A research on the collision probability calculation of space debris for nonlinear relative motions[J].Chinese Astronomy and Astrophysics,2011(35):304-317
    [11] 《数学手册》编写组.数学手册[M].北京:高等教育出版社,2010:87-89 "Handbook of Mathematics" Writing Group.Handbook of mathematics [M].Beijing:Higher Education Press,2010:87-89(in Chinese)
    [12] Klinkrad H.Space debris-models and risk analysis[M].New York:Springer & Praxis,2006
    [13] 王正明,易东云.测量数据建模与参数估计[M].长沙:国防科技大学出版社,1996 Wang Zhengming,Yi Dongyun.Instrumental data modeling and parameter estimation[M].Changsha:University of National Defence Technology Press,1996(in Chinese)
    [14] Felix R,Ronald L.Space track report No.3:models for propagation of NORAD element sets[R].Peterson:Aerospace Defense Command,United States Air Force,1980
    [15] Levit C,Marshall W.Improved orbit predictions using two-line elements[J].Advances in Space Research,2011,47(7):1107-1115

  • 加载中
计量
  • 文章访问数:  1023
  • HTML全文浏览量:  98
  • PDF下载量:  706
  • 被引次数: 0
出版历程
  • 收稿日期:  2013-12-06
  • 网络出版日期:  2014-11-20

目录

    /

    返回文章
    返回
    常见问答