起落架缓冲器卡滞动态临界摩擦探究

魏小辉; 宋晓晨; 李利荣; 聂宏

doi:10.13700/j.bh.1001-5965.2013.0418

起落架缓冲器卡滞动态临界摩擦探究

doi: 10.13700/j.bh.1001-5965.2013.0418

南京航空航天大学机械结构力学及控制国家重点实验室, 南京 210016

基金项目:

国家自然科学基金资助项目（51105197，51075203）；江苏高校优势学科建设工程资助项目

详细信息

作者简介:
魏小辉（1978- ），男，河南洛阳人，副教授，wei_xiaohui@nuaa.edu.cn.

中图分类号: V226
计量
- 文章访问数: 1226
- HTML全文浏览量: 69
- PDF下载量: 554
- 被引次数: 0
出版历程
- 收稿日期: 2013-07-17
- 网络出版日期: 2014-06-20

Dynamic critical friction of landing gear shock absorber binding

State Key Laboratory of Mechanics and Control of Mechanical Structures, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China

摘要

摘要: 为了探究起落架缓冲器卡滞特性设计准则，以某无人机主起落架为研究对象，依据飞机设计手册第14册中缓冲器卡滞特性分析方法，进行了静态和动态临界摩擦分析.分析表明动态临界摩擦在偏航着陆工况和机尾下沉回弹工况下可能发生卡滞.进而结合起落架落震动力响应曲线分析了动态临界摩擦的物理意义，发现现有飞机设计手册第14册中的动态临界摩擦分析方法卡滞判据并不成立，不应在计算临界摩擦系数时计入油液阻尼力.对于起落架缓冲器某状态时刻的卡滞特性分析，以飞机设计手册第14册中静态临界摩擦进行校核更为准确.
- 无人机 /
- 起落架 /
- 缓冲器 /
- 卡滞 /
- 临界摩擦
Abstract: In order to explore the design criterion of landing gear shock absorber binding, based on the method in aircraft design manual, takeoff and landing system design, the static and dynamic critical friction coefficients of a certain unmanned aerial vehicle's main landing gear were analyzed. The analysis shows that the dynamic critical friction in yaw landing load condition and maximal spring back drag in tail sinking load condition are prone to bind. And then combined with the landing gear drop dynamic response curve, the physical meaning of shock absorber dynamic binding was studied. Research shows that the argument foundation of the dynamic critical friction analysis does not hold and oleo-damping force should not be included when calculating the critical friction coefficient. For the analysis of landing gear shock absorber binding in the state of a moment, it is more accurate that taking the method of static critical friction in aircraft design manual-takeoff and landing system design to check.
- unmanned aerial vehicle /
- landing gear /
- shock absorber /
- binding /
- critical friction

HTML全文

参考文献(15)

[1]	飞机设计手册总编委会. 飞机设计手册:起飞着陆系统设计[M].北京:航空工业出版社,2002 The Chief Committee of Aircraft Design Manual.Aircraft design manual:takeoff and landing system design[M].Beijing:Aviation Industry Press,2002(in Chinese)
[2]	HB6176-88 飞机油-气缓冲器起落架设计[S] HB6176-88 Oleo-pneumatic shock absorber design of landing gear[S](in Chinese)
[3]	Curry N S. Aircraft landing gear design: principles and practices[M].Washington,DC:AIAA,1988
[4]	史海文. 摇臂式、支柱式起落架缓冲参数的研究[J].航空学报,1987,8(12):B625-B629 Shi Haiwen.A research in shock parameters of rock arm landing gear and telescopic landing gear[J].Acta Aeronautica et Astronautica Sinica,1987,8(12):B625-B629(in Chinese)
[5]	史海文,张大千, 杨树勋.摇臂式、支柱式起落架起转、回弹载荷系数的落震试验研究[J].飞机设计,2000(1):40-44 Shi Haiwen,Zhang Daqian,Yang Shuxun.A research in spin-up and spring back drag loads coefficient of rock arm landing gear and telescopic landing gear on drop test[J].Aircraft Design,2000(1):40-44(in Chinese)
[6]	陈岩. 运七200A前起落架缓冲器密封装置[J].航空科学技术,1998(3):31-32 Chen Yan.Sealing set of the buffer of the former landing gear for Y7-200A[J].Aeronautical Science and Technology,1998(3): 31-32(in Chinese)
[7]	刘一静, 袁明超,王晓雷.表面织构对发动机活塞/缸套摩擦性能的影响[J].中国矿业大学学报,2009,38(6):866-871 Liu Yijing,Yuan Mingchao,Wang Xiaolei.Influence of the surface texture on the tribological performances of piston skirt/liner[J].Journal of China University of Mining and Technology,2009,38(6):866-871(in Chinese)
[8]	赵士钦, 秘国芳,马力明.活塞表面处理技术综述[J].内燃机配件,2001(6):18-20 Zhao Shiqin,Mi Guofang,Ma Liming.Overview of surface treatment on piston[J].Internal Combustion Engine Parts,2001(6):18-20(in Chinese)
[9]	胡志彪, 李贺军,付前刚,等.低摩擦系数固体润滑涂层研究进展[J].材料工程,2006(3):60-62 Hu Zhibiao,Li Hejun,Fu Qiangang,et al.Research progress on low friction coefficient solid lubricating coatings[J].Journal of Materials Engineering,2006(3):60-62(in Chinese)
[10]	康克家, 杜三明,张永振,等.PTFE复合材料摩擦及改性研究综述[J].润滑与密封,2012,37(6):99-102 Kang Kejia,Du Sanming,Zhang Yongzhen,et al.A summary of study on friction and modification of PTFE composites[J].Lubrication Engineering,2012,37(6):99-102(in Chinese)
[11]	Khoddamzadeh A, Liu R,Wu X J,et al.Novel polytetrafluoro-ethylene (PTFE) composites with newly developed Tribaloy alloy additive for sliding bearings[J].Wear,2008,266(7/8):646-657
[12]	Unal H, Sen U,Mimaroqlu A,et al.Study of abrasive wear vol-ume map for PTFE and PTFE composites[J].Applied Composite Materials,2007,14(5/6):287-306
[13]	Unal H, Mimaroqlu A,Kadioglu U,et al.Sliding friction and wear behaviour of polytetrafluoroethylene and its composites under dry conditions[J].Materials and Design,2004,25(3): 239-245
[14]	刘丽兰,刘宏昭, 吴子英,等.机械系统中摩擦模型的研究进展[J].力学进展,2008(2):201-211 Liu Lilan,Liu Hongzhao,Wu Ziying,et al.An overview of friction models in mechanical[J].Advances in Mechanics,2008(2):201-211(in Chinese)
[15]	Milwitzky B, Cook F E.Analysis of landing-gear behavior[R].NACA-TR-1154,1953