Stress corrosion properties of 00Cr18Ni10N austenitic stainless steel welded joints
-
摘要: 采用恒载荷应力腐蚀实验方法和表面显微分析方法研究了3.5% NaCl水溶液中00Cr18Ni10N奥氏体不锈钢母材及焊接接头的应力腐蚀开裂行为.通过应力腐蚀120 h后剩余强度的损失量分析来比较00Cr18Ni10N母材及其焊接接头的应力腐蚀性能,并利用金相显微镜和扫描电镜研究了00Cr18Ni10N钢焊缝区、热影响区与母材的显微组织差别和应力腐蚀开裂断口形貌.结果表明,焊接接头的应力腐蚀断裂位置均位于焊缝区,在较高应力水平90%σ0.2下00Cr18Ni10N母材的强度损失较焊接接头低13.02%,母材的抗应力腐蚀性能优于焊接接头.断口形貌分析表明,00Cr18Ni10N母材和焊接接头在应力和腐蚀介质的共同作用下发生断裂,断口显现出沿晶断裂和韧窝断裂的形貌特征.Abstract: The behaviors of stress corrosion cracking of an austenitic stainless 00Cr18Ni10N parent material and its welded joint in 3.5% NaCl solution were investigated by using the constant load stress corrosion cracking and microscopic analysis methods. The residual strength was measured after 120 h for stress corrosion test to compare the stress corrosion resistance of 00Cr18Ni10N parent material and its welded joint through the loss analysis of strength. The microstructures of the weld zone, heat affected zone and base metal were analyzed by metallographic technique, and fracture morphology of stress corrosion cracking was investigated using scanning electron microscopy. The results show stress corrosion cracking of welded joints is located in the weld zone. A higher stress level 90% σ0.2, the strength lose of 00Cr18Ni10N parent material is 13.02% lower than that of the welded joints, which show that the stress corrosion resistance of 00Cr18Ni10N parent material is superior to the weld material. The fracture morphology analysis shows that the fracture of 00Cr18Ni10N parent material and its welded joint has the characteristic of intergranular fracture and dimple fracture under the joint action of stress and corrosive solution.
-
[1] 汤智慧, 陆峰, 张晓云, 等. 航空高强度结构钢及不锈钢防护研究与发展[J].航空材料学报, 2003, 23(z1):261-266 Tang Zhihui, Lu Feng, Zhang Xiaoyun, et al.Development of surface protection for aeronautical high-strength structural steel and stainless steel[J].Journal of Aeronautical Materials, 2003, 23(z1): 261-266(in Chinese) [2] Ding J H, Zhang L, Li D P, et al.Corrosion and stress corrosion cracking behavior of 316L austenitic stainless steel in high H2S-CO2-Cl- environment[J].Journal of Materials Science, 2013, 48(10):3708-3715 [3] 张震. 0Cr18Ni9Ti 奥氏体不锈钢焊接接头应力腐蚀行为的研究[J].木工机床, 2002(3):22-26 Zhang Zhen.Study on the strees corrosion cracking behavier of the welded joint of austenicic stainless steel 0Cr18Ni9Ti[J].Technology and Equipment, 2002(3):22-26(in Chinese) [4] Wu L F, Li S M, Liu J H, et al.SCC evaluation of ultra-high strength steel in acidic chloride solution[J].Journal of Central South University, 2012, 19(10):2726-2732 [5] Abedi S S, Abdolmaleki A, Adibi N.Failure analysis of SCC and SRB induced cracking of a transmission oil products pipeline[J]. Engineering Failure Analysis, 2007, 14(1):250-261 [6] Rokuro N, Takehide Y.Stress corrosion cracking of Cu-30% Zn alloy in Mattson's solutions at pH 7.0 and 10.0 using constant load method:a proposal of SCC mechanism[J].Corrosion Science, 2008, 50(4):1205-1213 [7] Liu Z Y, Li X G, Du C W, et al.Stress corrosion cracking behavior of X70 pipe steel in an acidic soil environment[J].Corrosion Science, 2008, 50(8):2251-2257 [8] Cheng Y F. Electrochemical polarization behavior of X70 steel in thin carbonate/bicarbonate solution layers trapped under a disbanded coating and its implication on pipeline SCC[J].Corrosion Science, 2010, 52(7):2511-2518 [9] Liu Z Y, Li X G, Zhang Y G, et al.Relationship between electrochemical characteristics and SCC of X70 pipeline steel in an acidic soil simulated solution[J].Acta Metallurgica Sinica:English Letters, 2009, 22(1):58-64 [10] 曹福想, 张启礼. 奥氏体不锈钢应力腐蚀裂纹失效分析及对策[J].南方金属, 2008(3):9-11 Cao Fuxiang, Zhang Qili.Failure analysis and precautions of stress-corrosion cracks of austenitic stainless steel components[J].Southern Metals, 2008(3):9-11(in Chinese) [11] 李晓延, 武传松, 李午申.中国焊接制造领域学科发展研究[J].机械工程学报, 2012, 48(6):19-31 Li Xiaoyan, Wu Chuansong, Li Wushen.Study on the progress of welding science and technology in China[J].Journal of Mechanical Engineering, 2012, 48(6):19-31(in Chinese) [12] 董宝明, 郭德伦, 张田仓.钛合金焊接结构在先进飞机中的应用及发展[J].航空材料学报, 2003, 23(10):240-243 Dong Baoming, Guo Delun, Zhang Tiancang.Application and development of titanium alloy weldstructure on advanced aircraft[J].Journal of Aeronautical Materials, 2003, 23(10):240-243(in Chinese) [13] 梁成浩. Ni 对 304 不锈钢焊接接头耐蚀性能的影响[J].腐蚀科学与防护技术, 2000, 12(2):68-71 Liang Chenghao.Effect of nickel on corrosion resistance of type 304 stainless steels welded joints[J].Corrosion Science and Protection Technology, 2000, 12(2):68-71(in Chinese) [14] 董俊明, 潘希德. 不锈钢焊接接头在 MgCl2 溶液中的应力腐蚀开裂研究[J].西安交通大学学报, 1997, 31(12):49-54 Dong Junming, Pan Xide.The stress corrosion cracking of stainless steel and its welded joints in MgCl2 solution[J].Journal of Xi'an Jiao Tong University, 1997, 31(12):49-54(in Chinese) [15] 程东亮. 焊接及热处理对2205双相不锈钢焊接接头腐蚀行为的影响[D].镇江:江苏科技大学, 2012 Cheng Dongliang.The effect of welding and heat treatment on the corrosion behavior of 2205 duplex stainless steel welded joints[D].Zhenjiang:Jiangsu University of Science, 2012(in Chinese) [16] 倪红芳. 喷丸对不锈钢焊接接头应力腐蚀开裂影响的研究[D].南京:南京工业大学, 2004 Ni Hongfang.A study on effects of shot-peening on stress corrosion cracking in stainless steel welded joints[D].Nanjing:Nanjing Tech University, 2004(in Chinese) [17] 张京海, 鲁晓声, 余巍.304不锈钢氩弧焊焊剂的研究[J].材料开发与应用, 2000, 15(6):1-4 Zhang Jinghai, Lu Xiaosheng, Yu Wei.Research on GTAW flux used for 304 stainless steel welding[J].Development and Application of Materials, 2000, 15(6):1-4(in Chinese)
点击查看大图
计量
- 文章访问数: 1037
- HTML全文浏览量: 104
- PDF下载量: 510
- 被引次数: 0