低噪声风力机翼型设计方法及实验分析

汪泉; 陈进; 程江涛; 王君; 孙金风; 游颖

doi:10.13700/j.bh.1001-5965.2014.0072

低噪声风力机翼型设计方法及实验分析

doi: 10.13700/j.bh.1001-5965.2014.0072

汪泉^1, ,,
陈进²,
程江涛^2,3,
王君¹,
孙金风¹,
游颖¹

1.
湖北工业大学机械工程学院, 武汉 430068
2. 重庆大学机械工程学院, 重庆 400030
3. 丹麦技术大学机械工程学院, 灵比 DK-2800

基金项目: 国家自然科学基金资助项目(51405140);国家863计划资助项目(2012AA051301);湖北工业大学博士科研启动金资助项目(BSQD13016)

详细信息

通讯作者:
汪泉(1984-),男,湖北武汉人,讲师, quan_wang2003@163.com,主要研究方向为机械系统优化设计及可再生能源装备设计理论与方法.

中图分类号: TK83;TH12
计量
- 文章访问数: 1006
- HTML全文浏览量: 115
- PDF下载量: 669
- 被引次数: 0
出版历程
- 收稿日期: 2014-02-24
- 网络出版日期: 2015-01-20

Wind turbine airfoil design method with low noise and experimental analysis

1.
School of Mechanical Engineering, Hubei University of Technology, Wuhan 430068, China
2. College of Mechanical Engineering, Chongqing University, Chongqing 400030, China
3. Department of Mechanical Engineering, Technical University of Demark, Lyngby DK-2800, Denmark

摘要

摘要: 为了研究风力机翼型的噪声特性,基于翼型泛函集成理论与翼型噪声计算模型,建立了低噪声翼型优化设计数学模型,提出在设计攻角情况下升阻比与噪声比值最大为目标函数,对优化后的新翼型CQU-DTU-B18翼型与NACA-64-618翼型在相同的风洞实验及风速条件下进行了噪声对比分析.研究表明,理论噪声计算模型虽然与实验数据有一定的偏差,但是翼型的升压级随频率的变化趋势是一致的,表明了翼型噪声计算模型的准确性;相比NACA-64-618翼型,CQU-DTU-B18翼型具有更低的噪声特性,从而验证了该设计方法的可行性.对于如何设计低噪声翼型及怎样降低翼型噪声具有重要的指导作用.
- 风力机翼型 /
- 噪声 /
- 风洞实验 /
- 声压级 /
- 频率
Abstract: In order to study the noise characteristic of wind turbine airfoils, the airfoil optimal design mathematic model was built based on airfoil functional integrated theory and noise calculated model. The new optimized objective function of maximizing lift/drag to noise was developed on the design angle of attack. Then, the comparison of sound pressure level between CQU-DTU-B18 and NACA-64-618 airfoil was analyzed under the same condition of wind tunnel experiment and wind speed. It is indicated that the changed trend of the predicted noise results are in agreement with that of the tested data, though there is a certain difference between the theory results and experiment data. Compared with NACA-64-618 airfoil, the CQU-DTU-B18 airfoil exhibits lower noise, which validates the feasibility of this design method. It is a guide to design wind turbine airfoil with lower noise and to reduce airfoil noise.
- wind turbine airfoil /
- noise /
- wind tunnel test /
- sound pressure level /
- frequency

HTML全文

参考文献(15)

[1]	贺德馨.风工程与工业空气动力学[M].北京:国防工业出版社,2006:221-225.He D X.Wind engineering and industrial aerodynamics[M].Beijing:National Defense Industry Press,2006(in Chinese).
[2]	Brooks T F,Pope D S,Marcolini M A.Airfoil self-noise and prediction[M].Washington:NASA,1989.
[3]	Zhu W J,Nicolai H,Shen W Z,et al.Modeling of aerodynamically generated noise from wind turbines[J].Journal of Solar Energy Engineering,2005,127(4):517-528.
[4]	司海青,王同光.风力机噪声的预测方法研究[J].空气动力学学报,2011,29(6):801- 804.Si H Q,Wang T G.Predicting method of aerodynamic noise from wind turbine[J].Acta Aerodynamic Sinica,2011,29(6):801-804(in Chinese).
[5]	余雷,宋文萍.风力机翼型气动噪声非线性声学计算[J].空气动力学学报,2013,31(2):266-272.Yu L,Song W P.Aerodynamic noise prediction for wind turbine airfoils using non-linear acoustics solvers [J].Acta Aerodynamic Sinica,2013,31(2):266-272(in Chinese).
[6]	Singh R K,Ahmed M R,Zullah M A,et al.Design of a low Reynolds number airfoil for small horizontal axis wind turbines[J].Renewable Energy,2012,42:66-76.
[7]	Timmer W A,Van Tooij R P J O M.Summary of the Delft University wind turbine dedicated airfoils[J].Journal of Solar Energy Engineering,2003,125(4):488-496.
[8]	Henriques J C C,Marques da Silva F,Estanqueiro A I,et al.Design of a new urban wind turbine airfoil using a preesure-load inverse method[J].Renewable Energy,2009,34:2728-2734.
[9]	Ribeiro A F P,Awruch A M,Gomes H M.An airfoil optimization technique for wind turbines[J].Applied Mathematical Modelling,2012,36(10):4898-4907.
[10]	刘雄,罗文博,陈严,等.风力机翼型气动噪声优化设计研究[J].机械工程学报,2011,47(14):134-139.Liu X,Luo W B,Chen Y,et al.Research on the aerodynamic noise optimization of wind turbine airfoil[J].Journal of Mechanical Engineering,2011,47(14):134-139(in Chinese).
[11]	周大高,柳阳威,文晓庆,等.改进SA模型对翼型分离流动的数值模拟[J].北京航空航天大学学报,2012,38(10):1384-1388.Zhou D G,Liu Y W,Wen X Q,et al.Modification of SA model for predicting airfoil flow separation[J].Journal of Beijing University of Aeronautics and Astronautics,2012,38(10):1384-1388(in Chinese).
[12]	黎作武,陈江,陈宝,等.风力机组叶片的先进翼型族设计[J].空气动力学学报,2012,30(10):130-136.Li Z W,Chen J,Chen B,et al.Design of advanced airfoil families for wind turbines[J].Acta Aerodynamic Sinica,2012,30(1):130-136(in Chinese).
[13]	王旭东,陈进,张石强.风力机叶片翼型型线集成设计理论研究[J].中国机械工程,2009,20(2):211-213.Wang X D,Chen J,Zhang S Q.Integration study on airfoil profile for wind turbines[J].China Mechanical Engineering,2009,20(2):211-213(in Chinese).
[14]	Zhu W J,Sørensen J N, Shen W Z.An aerodynamic noise propagation model for wind turbinesH[J].Wind Engineering,2005,29(2):129-143.
[15]	Brooks T F,Marcolini M A.Scaling of airfoil self-noise using measured flow parameters[J].AIAA Journal,1985,23(2):207-213