留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

基于多值决策图的温储备系统可靠性建模方法

翟庆庆 杨军 彭锐 赵宇

翟庆庆, 杨军, 彭锐, 等 . 基于多值决策图的温储备系统可靠性建模方法[J]. 北京航空航天大学学报, 2016, 42(3): 459-464. doi: 10.13700/j.bh.1001-5965.2015.0153
引用本文: 翟庆庆, 杨军, 彭锐, 等 . 基于多值决策图的温储备系统可靠性建模方法[J]. 北京航空航天大学学报, 2016, 42(3): 459-464. doi: 10.13700/j.bh.1001-5965.2015.0153
ZHAI Qingqing, YANG Jun, PENG Rui, et al. Multi-valued decision diagram based reliability modeling of warm standby systems[J]. Journal of Beijing University of Aeronautics and Astronautics, 2016, 42(3): 459-464. doi: 10.13700/j.bh.1001-5965.2015.0153(in Chinese)
Citation: ZHAI Qingqing, YANG Jun, PENG Rui, et al. Multi-valued decision diagram based reliability modeling of warm standby systems[J]. Journal of Beijing University of Aeronautics and Astronautics, 2016, 42(3): 459-464. doi: 10.13700/j.bh.1001-5965.2015.0153(in Chinese)

基于多值决策图的温储备系统可靠性建模方法

doi: 10.13700/j.bh.1001-5965.2015.0153
基金项目: 北京航空航天大学博士研究生创新基金(YWF-14-YJSY-035)
详细信息
    作者简介:

    翟庆庆 男,博士研究生。主要研究方向:可靠性建模、敏感性分析及可靠性统计。E-mail:zhaiqing59@126.com;杨军 男,博士,教授,博士生导师。主要研究方向:可靠性评估与验证及统计质量控制。Tel.:010-82316003 E-mail:tomyj2001@buaa.edu.cn;彭锐 男,博士,副教授。主要研究方向:系统可靠性分析与优化、系统保护与维修。E-mail:pengrui1988@ustb.edu.cn赵宇 男,博士,教授,博士生导师。主要研究方向:质量科学与工程、可靠性工程及应用统计。E-mail:zhaoyu@buaa.edu.cn

    通讯作者:

    杨军,Tel.:010-82316003 E-mail:tomyj2001@buaa.edu.cn

  • 中图分类号: TB114.3

Multi-valued decision diagram based reliability modeling of warm standby systems

Funds: the Innovation Foundation of BUAA for PhD Graduates (YWF-14-YJSY-035)
  • 摘要: 温储备系统是冷储备与热储备系统的推广,在实际中有广泛应用。针对不可修温储备系统的可靠性建模问题,已有基于多值决策图(MDD)的系统可靠性建模方法。该方法以系统中的单元故障为建模对象,分别构建故障级MDD与系统级MDD,进而获得系统可靠度的解析表达式。然而,该表达式中不同维度积分相互混杂,计算给定时刻的系统可靠度需要首先梳理系统可靠度的表达式,以利用数值方法求解其中的积分。为实现系统可靠度的程序化计算,在已有研究基础上提出将系统级MDD按故障数分解为一系列子决策图,通过对MDD中边的概率重新赋值获得每一子决策图的发生概率,得到系统可靠度的规范形式,形成一套完整的系统可靠度计算方法。

     

  • [1] AMARI S V, DILL G.A new method for reliability analysis of standby systems[C]//Proceedings of Annual Reliability and Maintainability Symposium (RAMS2009).Piscataway,NJ:IEEE Press,2009:417-422.
    [2] AMARI S V, PHAM H,MISRA R B.Reliability characteristics of k-out-of-n warm standby systems[J].IEEE Transactions on Reliability,2012,61(4):1007-1018.
    [3] TANNOUS O, XING L.Efficient analysis of warm standby systems using central limit theorem[C]//Proceedings of Annual Reliability and Maintainability Symposium (RAMS2012).Piscataway,NJ:IEEE Press,2012:1-6.
    [4] PAPAGEORGIOU E, KOKOLAKIS G.Reliability analysis of a two-unit general parallel system with (n-2) warm standbys[J].European Journal of Operational Research,2010,201(3):821-827.
    [5] SHE J, PECHT M.Reliability of a k-out-of-n warm-standby system[J].IEEE Transactions on Reliability,1992,41(1):72-75.
    [6] PENG R, ZHAI Q,XING L,et al.Reliability of 1-out-of-(n+1) warm standby systems subject to fault level coverage[J].International Journal of Performability Engineering,2013,9(1):117-120.
    [7] ZHAI Q, PENG R,XING L,et al.BDD-based reliability evaluation of k-out-of-(n+k) warm standby systems subject to fault-level coverage[J].Proceedings of the Institution of Mechanical Engineers,Part O:Journal of Risk and Reliability,2013,227(5):540-548.
    [8] TANNOUS O, XING L,DUGAN J.Reliability analysis of warm standby systems using sequential BDD[C]//Proceedings of Annual Reliability and Maintainability Symposium (RAMS2011).Piscataway,NJ:IEEE Press,2011:1-7.
    [9] ZHAI Q, PENG R,XING L,et al.Reliability of demand-based warm standby systems subject to fault level coverage[J].Applied Stochastic Models in Business and Industry,2015,31(3):380-393.
    [10] KUO W, ZUO M J.Optimal reliability modeling:Principles and applications[M].Hoboken:John Wiley & Sons,2003:231-280.
    [11] AKERS J, BERGMAN R,AMARI S V,et al.Analysis of multi-state systems using multi-valued decision diagrams[C]//Proceedings of Annual Reliability and Maintainability Symposium (RAMS2008).Piscataway,NJ:IEEE Press,2008:347-353.
    [12] XING L, DAI Y.A new decision-diagram-based method for efficient analysis on multistate systems[J].IEEE Transactions on Dependable and Secure Computing,2009,6(3):161-174.
    [13] SHRESTHA A, XING L,COIT D W.An efficient multistate multivalued decision diagram-based approach for multistate system sensitivity analysis[J].IEEE Transactions on Reliability,2010,59(3):581-592.
    [14] AMARI S V, XING L,SHRESTHA A,et al.Performability analysis of multistate computing systems using multivalued decision diagrams[J].IEEE Transactions on Computers,2010,59(10):1419-1433.
    [15] BERNTSEN J, ESPELID T O.Error estimation in automatic quadrature routines[J].ACM Transactions on Mathematical Software (TOMS),1991,17(2):233-252.
    [16] GENZ A, COOLS R.An adaptive numerical cubature algorithm for simplices[J].ACM Transactions on Mathematical Software (TOMS),2003,29(3):297-308.
    [17] MYERS A F. k-out-of-n:G system reliability with imperfect fault coverage[J].IEEE Transactions on Reliability,2007,56(3):464-473.
    [18] AMARI S V, MYERS A F,RAUZY A,et al.Imperfect coverage models:Status and trends[M]//MISRA K B.Handbook of performability engineering.London:Springer,2008:321-348.
  • 加载中
计量
  • 文章访问数:  806
  • HTML全文浏览量:  75
  • PDF下载量:  508
  • 被引次数: 0
出版历程
  • 收稿日期:  2015-03-18
  • 网络出版日期:  2016-03-20

目录

    /

    返回文章
    返回
    常见问答