留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

高碳醇/膨胀石墨复合相变热沉多目标优化

侯煦 邢玉明 郝兆龙 王仕淞 侯天睿

侯煦, 邢玉明, 郝兆龙, 等 . 高碳醇/膨胀石墨复合相变热沉多目标优化[J]. 北京航空航天大学学报, 2021, 47(9): 1866-1873. doi: 10.13700/j.bh.1001-5965.2020.0341
引用本文: 侯煦, 邢玉明, 郝兆龙, 等 . 高碳醇/膨胀石墨复合相变热沉多目标优化[J]. 北京航空航天大学学报, 2021, 47(9): 1866-1873. doi: 10.13700/j.bh.1001-5965.2020.0341
HOU Xu, XING Yuming, HAO Zhaolong, et al. Multi-objective optimization of a high alcohol/expanded graphite composite PCM based heat sink[J]. Journal of Beijing University of Aeronautics and Astronautics, 2021, 47(9): 1866-1873. doi: 10.13700/j.bh.1001-5965.2020.0341(in Chinese)
Citation: HOU Xu, XING Yuming, HAO Zhaolong, et al. Multi-objective optimization of a high alcohol/expanded graphite composite PCM based heat sink[J]. Journal of Beijing University of Aeronautics and Astronautics, 2021, 47(9): 1866-1873. doi: 10.13700/j.bh.1001-5965.2020.0341(in Chinese)

高碳醇/膨胀石墨复合相变热沉多目标优化

doi: 10.13700/j.bh.1001-5965.2020.0341
基金项目: 

航空科学基金 20172851018

详细信息
    通讯作者:

    郝兆龙, E-mail: haozhaolong@buaa.edu.cn

  • 中图分类号: TQ051.5;TK124

Multi-objective optimization of a high alcohol/expanded graphite composite PCM based heat sink

Funds: 

Aeronautical Science Foundation of China 20172851018

More Information
  • 摘要:

    为解决高温工作环境下电子芯片的发热问题,设计采用相变材料(PCM)的控温模块,建立相变材料的控温模块模型。相变材料选择高碳醇/膨胀石墨复合材料。借助FLUENT软件进行数值模拟,探究在相同加热功率下,加热面积对控温时间的影响。对控温模块的几何尺寸进行参数分析,将数值模拟结果用于训练人工神经网络,实现对控温时间的预测。根据芯片发热功耗、芯片尺寸,通过NGSA-Ⅱ多目标优化算法优化控温模块几何尺寸,延长控温时间,降低模块质量。最终得到一系列非支配解集,可根据控温时间需求选择合适的模块尺寸设计。针对长宽为35.4 mm、发热功率为15 W的芯片进行控温模块优化设计。环境温度为80℃,温控目标小于90℃,控温时间180 s,优化后模块减重13.0%,模块内温度与液相分布也更均匀。

     

  • 图 1  控温模块的几何模型

    Figure 1.  Geometric model of heat sink module

    图 2  控温模块剖面结构

    Figure 2.  Sectional structure of PCM based heat sink module

    图 3  相变温控实验系统

    Figure 3.  Experimental system of phase change temperature control

    图 4  实验系统照片

    Figure 4.  Photo of experimental system

    图 5  实验与数值模拟的温度-时间曲线对比

    Figure 5.  Temperature versus time curves of comparative experiment and numerical simulation

    图 6  计算域网格划分

    Figure 6.  Computational domain mesh partition

    图 7  不同网格密度对应的芯片平均温度

    Figure 7.  Average temperature of chip for different mesh density

    图 8  本文采用的神经网络结构

    Figure 8.  Architecture of neural network employed in present study

    图 9  NSGA-Ⅱ多目标优化算法流程

    Figure 9.  Steps involved in NSGA-Ⅱ malti-objective optimizazion algorithm

    图 10  优化后的Pareto前沿与优化前的结果对比

    Figure 10.  Comparison of Pareto front before and after optimization

    图 11  控温100 s后控温模块内部温度和液相分布

    Figure 11.  Temperature and liquid phase fraction distribution in the heat sink at 100 s

    表  1  数值模拟芯片-控温模块组合的几何尺寸

    Table  1.   Geometric dimension for chip-heat sink configuration for numerical simulation

    芯片边长c/mm 模块边长l/mm 厚度H/mm
    50 50 9~13
    35.4 50 9~13
    35.4 35.4 9~13
    28.9 50 9~13
    28.9 28.9 9~13
    下载: 导出CSV

    表  2  物性参数

    Table  2.   Parameters of physical properties

    材料 高碳醇 膨胀石墨
    密度/(kg·m-3) 920
    比热/(J·(kg·K)-1) 3 000 620 2 719
    导热系数/(W·(m·K)-1) 0.3 698 871
    潜热/(kJ·kg-1) 200 229.52 202.4
    相变温度/K 358
    下载: 导出CSV

    表  3  优化前后的模块几何尺寸对比

    Table  3.   Comparison of heat sink dimension before and after optimization

    参数 优化后 优化前
    c/mm 35.4 35.4
    P/W 15 15
    l/mm 42.5 50
    H/mm 15 12
    m/g 45.64 52.47
    下载: 导出CSV
  • [1] 胡锦炎. 固液相变储能热沉的理论与实验研究[D]. 武汉: 华中科技大学, 2017.

    HU J Y. Theoretical and experimental research on thermal storage heat sink based on solid-liquid phasechange[D]. Wuhan: Huazhong University of Science and Technology, 2017(in Chinese).
    [2] ARSHAD A, ALI H M, YAN W M, et al. An experimental study of enhanced heat sinks for thermal management using n-eicosane as phase change material[J]. Applied Thermal Engineering, 2018, 132: 52-66. doi: 10.1016/j.applthermaleng.2017.12.066
    [3] SRIKANTH R, NEMANI P, BALAJI C. Multi-objective geometric optimization of a PCM based matrix type composite heat sink[J]. Applied Energy, 2015, 156: 703-714. doi: 10.1016/j.apenergy.2015.07.046
    [4] WANG S P, QIN P, FANG X M, et al. A novel sebacic acid/expanded graphite composite phase change material for solar thermal medium-temperature applications[J]. Solar Energy, 2014, 99: 283-290. doi: 10.1016/j.solener.2013.11.018
    [5] QU Y, WANG S, ZHOU D, et al. Experimental study on thermal conductivity of paraffin-based shape-stabilized phase change material with hybrid carbon nano-additives[J]. Renewable Energy, 2020, 146: 2637-2645. doi: 10.1016/j.renene.2019.08.098
    [6] 车海山. 赤藓糖醇基相变储热材料的制备及性能研究[D]. 南京: 南京理工大学, 2018.

    CHE H S. Preparation and performance study of erythritol-based phase change energy storage composites[D]. Nanjing: Nanjing University of Science and Technology, 2018(in Chinese).
    [7] GHARBI S, HARMAND S, JABRALLAH S B. Experimental comparison between different configurations of PCM based heat sinks for cooling electronic components[J]. Applied Thermal Engineering, 2015, 87: 454-462. doi: 10.1016/j.applthermaleng.2015.05.024
    [8] ARSHAD A, ALI H M, KHUSHNOOD S, et al. Experimental investigation of PCM based round pin-fin heat sinks for thermal management of electronics: Effect of pin-fin diameter[J]. International Journal of Heat and Mass Transfer, 2018, 117: 861-872. doi: 10.1016/j.ijheatmasstransfer.2017.10.008
    [9] 周慧琳, 邱燕. 矩形单元蓄热特性及结构优化[J]. 储能科学与技术, 2020, 9(4): 1082-1090. https://www.cnki.com.cn/Article/CJFDTOTAL-CNKX202004009.htm

    ZHOU H L, QIU Y. Heat storage characteristic and structure optimum in rectangular unit[J]. Energy Storage Science and Technology, 2020, 9(4): 1082-1090(in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-CNKX202004009.htm
    [10] LIU H L, LI B T, ZHANG L K, et al. Optimizing heat-absorption efficiency of phase change materials by mimicking leaf vein morphology[J]. Applied Energy, 2020, 269: 114982. doi: 10.1016/j.apenergy.2020.114982
    [11] VOLLER V R. Implicit finite-Difference solutions of the enthalpy formulation of Stefan problems[J]. IMA Journal of Numerical Analysis, 1985, 5(2): 201-214. doi: 10.1093/imanum/5.2.201
    [12] SARI A, BICER A, LAFCI O, et al. Galactitol hexa stearate and galactitol hexa palmitate as novel solid-liquid phase change materials for thermal energy storage[J]. Solar Energy, 2011, 85(9): 2061-2071. doi: 10.1016/j.solener.2011.05.014
    [13] YANG M Z, WANG H, SHUAI W Q, et al. Thermal optimization of a kirigami-patterned wearable lithium-ion battery based on a novel design of composite phase change material[J]. Applied Thermal Engineering, 2019, 161: 114141. doi: 10.1016/j.applthermaleng.2019.114141
    [14] DEB K, PRATAP A, AGARWAL S, et al. A fast and elitist multiobjective genetic algorithm: NSGA-Ⅱ[J]. IEEE Transactions on Evolutionary Computation, 2002, 6(2): 182-197. doi: 10.1109/4235.996017
    [15] SRIKANTH R, BALAJI C. Experimental investigation on the heat transfer performance of a PCM based pin fin heat sink with discrete heating[J]. International Journal of Thermal Sciences, 2017, 111: 188-203. doi: 10.1016/j.ijthermalsci.2016.08.018
  • 加载中
图(11) / 表(3)
计量
  • 文章访问数:  272
  • HTML全文浏览量:  56
  • PDF下载量:  43
  • 被引次数: 0
出版历程
  • 收稿日期:  2020-07-14
  • 录用日期:  2020-09-04
  • 网络出版日期:  2021-09-20

目录

    /

    返回文章
    返回
    常见问答