底凹结构减阻效应数值分析

doi:10.13700/j.bh.1001-5965.2020.0623

北京航空航天大学学报 ›› 2022, Vol. 48 ›› Issue (4): 682-690.doi: 10.13700/j.bh.1001-5965.2020.0623

底凹结构减阻效应数值分析

李彪, 王良明, 杨志伟

南京理工大学能源与动力工程学院, 南京 210016

收稿日期:2020-11-09 发布日期:2022-04-27
通讯作者: 王良明 E-mail:lmwang802@163.com

Numerical analysis on drag reduction effect of base cavity

LI Biao, WANG Liangming, YANG Zhiwei

School of Energy and Power Engineering, Nanjing University of Science and Technology, Nanjing 210016, China

Received:2020-11-09 Published:2022-04-27

摘要/Abstract

摘要： 为研究弹丸底凹结构的减阻机理，使用三维定常CFD方法对M910弹丸的流场特性进行了数值模拟。给出了零升阻力系数随马赫数的变化规律，所得结果与实验数据符合很好。在此基础上，为M910弹丸引入底凹结构并进行数值模拟。对比了不同弹底结构的底部流场特性，对底凹结构减阻效应的产生机理进行了分析。结果表明：亚声速下，底凹结构在底凹腔体内引入了高压“死水区”，并以“屈从”的流体边界代替了原固体底面，从而改变了尾部涡街的形成位置、形状和强度，最终增大底部压力，减小弹丸阻力；跨声速下，由于尾部涡街远离弹丸底面，固体底面与流体边界面的作用相同，使得底凹不再具有减阻效果；超声速下，底凹结构的减阻机理与底排弹丸减阻机理类似，即底凹结构中的流体为弹丸底部回流区添加质量从而达到减阻作用。

关键词: 减阻效应, 底部流场, 数值模拟, 底凹弹丸, 零升阻力系数

Abstract: In order to investigate the drag reduction mechanism of the base-cavity projectile, the flow field characteristics of M910 projectile are numerically simulated through the 3-dimensional steady CFD method. The zero-lift drag coefficient variation with Mach number are presented. The computational results have a good agreement with the experimental data. On this basis, a base cavity is introduced for M910 projectile that is named M910BC in this paper and then numerically simulated. The base flow field characteristics of the projectile with different base structures are compared and the drag reduction mechanism of the base cavity is analyzed. The results show that at subsonic speed, the drag reduction of the base-cavity projectile is found to be mainly due to the introduction of the high-pressure "dead zone" in base cavity and the displacement of the solid base with the compliant fluid boundary of the cavity base. Because of that, the forming location, shape and strength of the wake vortex are slightly changed. At transonic speed, the drag reduction effect of base cavity is vanished since the wake vortex is further from the base of projectile and the effects of the solid base and fluid boundary are the same. At supersonic speed, the drag reduction mechanism of the base cavity is that the mass of the recirculation region is increased by the flow of the base cavity, which is similar to the drag reduction mechanism of the base bleed projectile.

Key words: drag reduction effect, base flow field, numerical simulation, base-cavity projectile, zero-lift drag coefficient

中图分类号:

TJ41
V211.3

李彪, 王良明, 杨志伟. 底凹结构减阻效应数值分析[J]. 北京航空航天大学学报, 2022, 48(4): 682-690.

LI Biao, WANG Liangming, YANG Zhiwei. Numerical analysis on drag reduction effect of base cavity[J]. Journal of Beijing University of Aeronautics and Astronautics, 2022, 48(4): 682-690.

参考文献

[1] 臧国才,李树常.弹箭空气动力学[M].北京:兵器工业出版社,1989:142-144.ZANG G C,LI S C.Aerodynamics of projectiles and missiles[M].Beijing:Publishing House of Ordnance Industry,1989:142-144(in Chinese).
[2] TANNER M.Base cavity at angles of incidence[J].AIAA Journal,1988,26(3):376-377.
[3] SAHU J.A computational study of the base region flow field for the M865 projectile:ARL-TR-109[R].Reston:AIAA,1993.
[4] SAHU J,NIRTUBICZ C J.Three dimensional flow calculations for a projectile with standard and dome bases:BRL-TR-3150[R].Reston:AIAA,1990.
[5] SAHU J,NIETUBICZ C J,HEAVEY K R.Computational study of the M825 projectile with standard and dome base:BRL-MR-3662[R].Reston:AIAA,1986.
[6] HERRIN J L,DUTTON J C.Supersonic base flow experiments in the near-wake of a cylindrical afterbody[J] AIAA Jornal,1994,32(1):77-83.
[7] KRUISWYK R W,DUTTON J C.Effects of a base cavity on subsonic near-wake flow[J].AIAA Journal,1990,28(11):1885-1893.
[8] KRUISWYK R W,DUTTON J C.An experimental investigation of the effects of base cavity on the near-wake flowfield of a body at subsonic and transonic speeds[C]//Proceedings of 27th Aerospace Sciences Meeting.Reston:AIAA,1989:210.
[9] MOLEZZI M J,DUTTON J C.Study of subsonic base cavity flowfield structure using particle image velocimetry[J].AIAA Journal,1995,33(2):201-209.
[10] FOURNIER E Y,DUPUIS A D,EDWARDS J A.Base cavity effects on the aerodynamic characteristics of a hypersonic flared projectile[J].Journal of Spacecraft and Rockets,1997,34(6):737-743.
[11] FOURNIER E Y,DUPUIS A D.Computational fluid dynamic analysis of the base cavity interactions of the CAN-4 research projectile:DREV-TM-9620[R].Quebec:Defense R&D,1997.
[12] SIMON F,DECK S,GUILLEN P,et al.Zonal-detached-eddy simulation of projectiles in the subsonic and transonic regimes[J].AIAA Journal,2007,45(7):1606-1619.
[13] SIMON F,DECK S,GUILLEN P.Reynolds-averaged Navier-Stokes/large-eddy simulations of supersonic base flow[J].AIAA Journal,2006,44(11):2578-2590.
[14] 谷嘉锦.底凹弹丸的风洞实验研究[J].南京航空航天大学学报,1979,12(1):243-253.GU J J.The study of wind tunnel experiments of a ball with hollow base[J].Journal of Nanjing University of Aeronautics and Astronautics,1979,12(1):243-253(in Chinese).
[15] 浦发,王中原.超音速底凹弹减阻机理的研究[J].弹道学报,1989,9(1):63-67.PU F,WANG Z Y.The analysis of drag reduction in supersonic speed for projectiles with base cavity[J].Journal of Ballisitics,1989,9(1):63-67(in Chinese).
[16] 王中原.超声速底凹弹侧壁开孔对飞行阻力的影响[J].空气动力学学报,1997,15(4):502-506.WANG Z Y.The effect about projectiles of base cavity with side holes to flight drag under supersonic flow[J].Acta Aerodynamic Sinca,1997,15(4):502-506(in Chinese).
[17] 王中原.底凹弹侧壁斜孔减小底阻分析[J].南京理工大学学报,1997,21(1):21-24.WANG Z Y.Analysis of base drag reduced by side holes in the projectile with base cavity[J].Journal of Nanjing University of Science and Technology,1997,21(1):21-24(in Chinese).
[18] PAN S C,CAI J S.Investigation of vortical flow over bluff bodies with base cavities[J].Acta Mechanica Sinica,2012,28(5):1238-1247.
[19] 轩海彬,张文洁,于勇,等.亚跨声速流动中底凹减阻的数值模拟[J].兵器装备工程学报,2017,38(11):1-8.XUAN H B,ZHANG W J,YU Y,et al.Numerical study on drag reduction of projectile in subsonic and transonic speed[J].Journal of Ordnance Equipment Engineering,2017,38(11):1-8(in Chinese).
[20] 陆海波,颛孙世周,孙凤文,等.不同形状底凹结构对火炮弹丸飞行阻力影响研究[J].弹箭与制导学报,2016,36(5):112-114.LU H B,ZHUANSUN S Z,SUN F W,et al.Research on influence of base cavity with different shape on aerodynamic drag of projectile[J].Journal of Projectiles,Rockets,Missiles and Guidance,2016,36(5):112-114(in Chinese).
[21] 陆海波,高洁.侧倾底凹结构对火炮弹丸阻力的影响[J].兵器装备工程学报,2019,40(6):5-9.LU H B,GAO J.Research on shrinkage shape of base cavity upon aerodynamic drag of projectile[J].Journal of Ordnance Equipment Engineering,2019,40(6):5-9(in Chinese).
[22] DESPIRITO J,HEAVEY K.CFD computation of magnus moment and roll-damping moment of a spinning projectile[C]//AIAA Atmospheric Flight Mechanics Conference and Exhibit.Reston:AIAA,2004:1-24.
[23] 于勇.Fluent入门与进阶教程[M].北京:北京理工大学出版社,2008:23-25.YU Y.Fluent introductory and advanced tutorials[M].Beijing:Beijing Institute of Technology Press,2008:23-25(in Chinese).
[24] LAUNDER B E,SHARMA B I.Application of the energy dissipation model of turbulence to the calculation of flow near a spinning disc[J].Letter in Heat and Mass Transfer,1974,1(11):131-138.
[25] 雷娟棉,李田田,黄灿.高速旋转弹丸马格努斯效应数值研究[J].兵工学报,2013,34(6):718-725.LEI J M,LI T T,HUANG C.A numerical investigation of Magnus effect for high-speed spinning projectile[J].Acta Armamentarii,2013,34(6):718-725(in Chinese).
[26] 卓长飞,武晓松,封峰.超声速流动中底部排气减阻的数值研究[J].兵工学报,2014,35(1):18-26.ZHUO C F,WU X S,FENG F.Numerical research on drag reduction of base bleed in supersonic flow[J].Acta Armamentarii,2014,35(1):18-26(in Chinese).

底凹结构减阻效应数值分析

Numerical analysis on drag reduction effect of base cavity

RichHTML

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	张超, 方鑫, 刘建春. 复合材料层板冰雹高速冲击损伤预测及失效分析[J]. 北京航空航天大学学报, 2022, 48(4): 698-707.
[2]	侯天睿, 邢玉明, 郑文远, 郝兆龙. 泡沫铜/低熔点合金复合相变材料凝固放热分析[J]. 北京航空航天大学学报, 2022, 48(3): 438-446.
[3]	雷玉昌, 张登成, 张艳华, 苏光旭. 脉冲射流对环量控制翼型气动性能的影响[J]. 北京航空航天大学学报, 2022, 48(3): 485-494.
[4]	刘国田, 白文涛, 潘江丽, 陈广豪, 潘俊, 冯诗愚. 机载中空纤维膜组件壳程气体流动数值模拟[J]. 北京航空航天大学学报, 2022, 48(3): 544-550.
[5]	丛戎飞, 叶友达, 赵忠良. 吸气式高超声速飞行器耦合运动数值模拟[J]. 北京航空航天大学学报, 2021, 47(9): 1780-1789.
[6]	周振华, 孟庆亮, 赵振明. 微重力下两相控温型储液器内气液界面仿真分析[J]. 北京航空航天大学学报, 2021, 47(6): 1152-1160.
[7]	江露生, 曹亚雄, 刘婷, 樊枫. 共轴刚性旋翼悬停状态桨叶表面压力测量试验与计算研究[J]. 北京航空航天大学学报, 2021, 47(12): 2484-2493.
[8]	李心语, 刘火星. 气冷涡轮导叶流热耦合计算及机理[J]. 北京航空航天大学学报, 2021, 47(11): 2378-2386.
[9]	雷玉昌, 张登成, 张艳华. 环量控制翼型非定常气动力建模[J]. 北京航空航天大学学报, 2021, 47(10): 2138-2148.
[10]	王苏明, 冯诗愚, 李宗祺, 彭孝天, 刘卫华. 燃油箱耗氧惰化与中空膜惰化的数值模拟及比较[J]. 北京航空航天大学学报, 2020, 46(5): 1032-1038.
[11]	吴利红, 王诗文, 封锡盛, 李一平, 刘开周. AUV自航对接的类物理数值模拟[J]. 北京航空航天大学学报, 2020, 46(4): 683-690.
[12]	李庆展, 李双喜, 郑娆, 马文杰, 庄宿国. 影响三瓣式高速浮环密封性能的敏感参数[J]. 北京航空航天大学学报, 2020, 46(3): 571-578.
[13]	孟庆亮, 杨涛, 于志, 赵振明, 赵宇, 于峰. 空间遥感器用环路热管瞬态数值模拟与在轨验证[J]. 北京航空航天大学学报, 2020, 46(11): 2045-2055.
[14]	陈扬, 童朝霞, 冯锦艳, 高政国. 含初始裂缝水泥混凝土路面对冲击荷载响应分析[J]. 北京航空航天大学学报, 2019, 45(7): 1474-1480.
[15]	伏娜, 张晞. 质子交换炉温度场均匀性分析与优化[J]. 北京航空航天大学学报, 2019, 45(4): 735-742.