误差定性分析方法在机构导航系统中的应用

胡磊; 张力丹; 王田苗

误差定性分析方法在机构导航系统中的应用

1.
北京航空航天大学自动化科学与电气工程学院, 北京 100083
2. 北京积水潭医院创伤骨科,北京 100035

基金项目: 国家863基金资助项目(2002AA420100)

详细信息

中图分类号: TP 274
计量
- 文章访问数: 2718
- HTML全文浏览量: 81
- PDF下载量: 784
- 被引次数: 0
出版历程
- 收稿日期: 2003-06-11
- 网络出版日期: 2004-01-31

Application of qualitative error analysis method in the mechanical navigation system

1.
School of Automation Science and Electrical Engineering, Beijing University of Aeronautics and Astronautics, Beijing 100083, China
2. Department of Traumatology and Orthopedics, Beijing Jishuitan Hospital, Beijing 100035, China

摘要

摘要: 在分析机构导航误差的基础上,提出用泰勒级数展开法对机构导航系统的误差进行定性分析;同时,结合计算机辅助髓内钉远端锁定瞄准系统这一具体实例,对定性分析的结论和实际试验结果作了比较.比较结果说明该方法是准确有效的,能够为该类系统的设计及优化提供可靠的依据.
- 机构 /
- 导航 /
- 误差定性分析 /
- 泰勒级数展开法
Abstract: The qualitative error analysis of the mechanical navigation system was implemented using Taylor series expansion method after introduction of the system characters. The accuracy and effectiveness of this method were expressed by the compare results of qualitative analysis with specific experiment test of computer-assisted distal locking system of intramedullary nail . The idea of this method can be used as a reliable basis for designing and optimizing the same kind of system.
- mechanisms /
- navigation /
- qualitative error analysis /
- Taylor series expansion method

HTML全文

参考文献(1)

[1] Foley K T, Simon D A, Rampersand Y R. Virtual fluroscopy:computer-assisted fluoroscopic navigation[J]. Spine,2001,26(4):347~351 [2] Mcrmulla R, Hibert M, Niederdellmann N. Tnherent precision of mechanical, infrared and laser-guided navigation systems for computer-assisted surgery . Craniomaxillofac Surg, 1997,25(4):192~197 [3] Voss G, Bisler A, Bockholt U, \%et al\%. ICAPS an integrative computer-assisted planning system for pedicle screw insertion[J]. Stud Health Technol Inform, 2001,81:561~563 [4] Taylor R H. An image-directed robotic system for precise orthopedic surgery[J]. IEEE Trans Robotics and Automation , 1994,10(3):261~274 [5] 石则昌,刘深厚.机械精确度[M].北京:高等教育出版社,1995. 74~83 Shi Zechang, Liu Shenhou. Mechanical precision[M]. Beijing:Higher Education Press, 1995. 74~83 (in Chinese) [6] 宋黎,杨坚,曹惟庆. 用蒙特卡洛法进行平面连杆机构的运动误差综合[J]. 机械科学与技术, 1997,6(3)479~482 Song Li, Yang Jian, Cao Weiqing. The motion error synthesis of planar likages through Monte-Carlo method [J]. Mechanical Science Technology, 1997, 6(3):479~482 (in Chinese) [7] 杜小平. 机构的运动误差分析与可靠性计算[J]. 机械, 1995,22(4):16~18 Du Xiaoping. The motion error analysis and reliability calculation of mechanism [J]. Mechanics,1995,22(4):16~18(in Chinese) [8] 马颂德, 张正友. 计算机视觉[M]. 北京:科学出版社,52~71 Ma Songde, Zhang Zhengyou. Computer vision[M]. Beijing:Science Press, 52~71(in Chinese) [9] 陈梦东. 医疗外科机器人集成系统研究 . 北京:北京航空航天大学机械工程及自动化学院,1998.57~78 Chen Mengdong. Research on the surgical robotic integrated system . Beijing:School of Mechanical Engineering and Automation, Beijing University of Aeronautics and Astronautics, 1998.57~78 (in Chinese)

施引文献

资源附件(0)

访问统计