Research on intelligent simulation modeling library of three-axis virtual flight motion simulator
-
摘要: 针对三轴虚拟转台系统中的智能模型库单元,采用遗传算法、参数化设计和虚拟现实等技术,实现转台仿真模型库的智能设计和快速性.通过Pro/Toolkit软件接口和参数化方法建立起转台仿真模型库软件系统,采用遗传算法实现模型库的智能优化设计,同时实现模型库的自动装配和实时仿真,并最终形成通用的转台智能仿真模型库软件平台.实际仿真结果表明,智能模型库的实现除了具有智能参数化模型库设计功能外,还具有优秀的开放接口,如果进一步完善接口的通用性,将减少智能仿真模型库应用的局限性,应用更加广泛.
-
关键词:
- 遗传算法 /
- 参数法 /
- 虚拟仿真转台 /
- CAD二次开发 /
- Pro/Toolkit
Abstract: To solve intelligent and rapid design problem of model library of three-axis flight motion simulator, an advanced approach of intelligent simulation model library of virtual flight motion simulator was proposed, based on intelligent parametric design, genetic algorithm, virtual reality and Pro/Toolkit interface tools. Genetic algorithm was used to optimize model parameters on the basis of a common product model library, which was generated by secondary development approach of Pro/Toolkit and parametric design; still more, an open software platform was designed and implemented to model assembling and real-time simulation during a virtual developing environment. The simulating results indicate the above method could be used to design and optimize the model's parameters quickly and effectively at engineering analyses. Having added intelligent methods and a common interface that can compensate for the shortages of types and capacities of table’s model library, the limit to the above intelligent model library is released and this method's application range is extended. -
[1] Buchanan S A, Alan D P. Constraint definition system:a computer-algebra based approach to solving geometric constraint problems[J]. Computer Aided Design, 1993,25(12):741~750 [2] Joan Arinyo R, Soto A. A correct rule-based geometric constraint solver[J]. Computers & Graphics,1997,5(21):599~609 [3] Bouma William, Fudos Ioannis, Hoffmann Christoph, et al. Geometric constraint solver[J].Computer Aided Design, 1995,27(6):487~501 [4] 刘正华,尔联洁,刘金锟,等.三轴高精度虚拟仿真转台研究[J]. 系统仿真学报,2003,15(11):1613~1617 Liu Zhenghua, Er Lianjie, Liu Jinkun,et al. Research on three-axis virtual table[J]. Journal of System Simulation, 2003,15(11):1613~1617(in Chinese) [5] 刘正华,尔联洁,刘金锟,等.三轴虚拟仿真转台系统设计及实现[J]. 计算机工程与应用,2003,39(15):27~29 Liu Zhenghua, Er Lianjie, Liu Jinkun, et al. Design and implementation of three-axis virtual table[J].Computer Engineering and Application, 2003,39(15):27~29(in Chinese) [6] 孙增圻,张再兴,邓志东.智能控制理论与技术[M].北京:清华大学出版社,1997 Sun Zengqi, Zhang Zaixing, Deng Zhidong. Intelligent control theory and technology[M].Beijing:Tsinghua University Press,1997(in Chinese) -
点击查看大图
计量
- 文章访问数: 2771
- HTML全文浏览量: 106
- PDF下载量: 354
- 被引次数: 0
下载:
