北京航空航天大学学报 ›› 2005, Vol. 31 ›› Issue (06): 696-699.

• 论文 • 上一篇    下一篇

结温可控的晶体管稳态工作寿命试验方法研究

李霁红1, 贾颖1, 康锐1, 张德骏2   

  1. 1. 北京航空航天大学 工程系统工程系, 北京 100083;
    2. 山东大学 物理与微电子学院, 济南 250100
  • 收稿日期:2004-02-27 发布日期:2010-09-21
  • 作者简介:李霁红(1965-),女,福建福州人,博士生, miaoruo38@163.com.

Study of transistor steady-state operation life test by method of controllable junction temperature

Li Jihong1, Jia Ying1, Kang Rui1, Zhang Dejun2   

  1. 1. Dept. of System Engineering of Engineering Technology, Beijing University of Aeronautics and Astronautics, Beijing 100083, China;
    2. School of Physics and Microelectronics, Shandong University, Jinan 250016, China
  • Received:2004-02-27 Published:2010-09-21

摘要: 在分析了现行标准中晶体管稳态工作寿命试验方法存在问题的基础上,认为在现行的稳态工作寿命试验中没有对晶体管的结温实施测量和控制,是导致试验结果不准确的重要原因.旨在提高晶体管稳态工作寿命试验方法的可信度,提出了一种在试验过程中实时测量并严格控制晶体管结温在最高允许结温附近的稳态工作寿命试验方法.以3DD820,3DD15D (F2金属封装)双极晶体管为实验对象,对结温可控的晶体管稳态工作寿命试验方法进行了验证.模拟试验数据分析结果表明,该试验方法可以有效地提高晶体管稳态工作寿命试验方法的可信度.

Abstract: Analyzing the various problems of current steady-state operation life test standard, it is pointed out that, not measuring and controlling, transistor junction temperature in current transistor steady-state operation life test can lead to fatal inaccuracy of the test results. To increase the accuracy of the test method, a steady-state operation life test method with additional measuring and strictly controlling transistor junction temperature, in the highest temperature range, is given. Bipolar transistors of the type of 3DD820 and 3DD15D (with F2 metal-pack) are taken as an example in the study to verify the method of controllable junction temperature. Analyzing result of simulated experiment data shows that the test method can increase availably the accuracy of the transistor steady-state operation life test method.

中图分类号: 


版权所有 © 《北京航空航天大学学报》编辑部
通讯地址:北京市海淀区学院路37号 北京航空航天大学学报编辑部 邮编:100191 E-mail:jbuaa@buaa.edu.cn
本系统由北京玛格泰克科技发展有限公司设计开发