北京航空航天大学学报 ›› 2004, Vol. 30 ›› Issue (02): 118-121.

• 论文 • 上一篇    下一篇

飞机板金成形数据库的开发

万敏, 李新军, 刘玉芳, 江勇   

  1. 北京航空航天大学 机械工程及自动化学院, 北京 100083
  • 收稿日期:2002-10-18 出版日期:2004-02-29 发布日期:2010-09-21
  • 作者简介:万 敏(1962-),男,江西南昌人,教授, mwan@buaa.edu.cn.
  • 基金资助:

    国防预研项目(41318425)

Development on database of aircraft sheet metal forming

Wan Min, Li Xinjun, Liu Yufang, Jiang Yong   

  1. School of Mechanical Engineering and Automation, Beijing University of Aeronautics and Astronautics, Beijing 100083, China
  • Received:2002-10-18 Online:2004-02-29 Published:2010-09-21

摘要: 为了配合航空工业进一步技术更新,以信息化技术提升传统的飞机板金工艺,根据航空工业飞机生产、型号预研、板金工艺手册、工艺实验等大量数据信息,基于Sybase数据库管理系统,应用PowerBuilder开发软件,研究开发了一套集板材性能、成形工艺、机床设备、工装模具等数据资料的飞机板金成形数据库系统(Ashbase).对该系统在设计思想、总体结构、系统功能、数据表现等方面的设计与实现方法进行了分析.

Abstract: To coordinate deeper technology renovation for aeronautic industry and elevate the conventional aircraft sheet metal forming process with information technology, based on a great deal of data and information from the aircraft manufacturing, pre-research, sheet metal forming manual, and process tests in aeronautic industry, a system of aircraft sheet metal forming database (Ashbase) was developed using PowerBuilder software and Sybase database management system. This system includes the data and information about the sheet properties, forming processes, tools and dies. And the methods for designing and realizing the design idea, general structure, system function, and data show of this system were analyzed.

中图分类号: 


版权所有 © 《北京航空航天大学学报》编辑部
通讯地址:北京市海淀区学院路37号 北京航空航天大学学报编辑部 邮编:100191 E-mail:jbuaa@buaa.edu.cn
本系统由北京玛格泰克科技发展有限公司设计开发