北京航空航天大学学报 ›› 2004, Vol. 30 ›› Issue (12): 1195-1199.

• 论文 • 上一篇    下一篇

基于COM/DCOM的分布式零件参数化 设计系统的研究

黎波, 王荣桥   

  1. 北京航空航天大学 能源与动力工程学院 北京 100083
  • 收稿日期:2003-06-27 出版日期:2004-12-31 发布日期:2010-09-21
  • 作者简介:黎 波(1979-),男,江西萍乡人,硕士生, wangrq@buaa.edu.cn.

Distributed part parametric design system based on COM/DCOM

Li Bo, Wang Rongqiao   

  1. School of Jet Propulsion, Beijing University of Aeronautics and Astronautics, Beijing 100083, China
  • Received:2003-06-27 Online:2004-12-31 Published:2010-09-21

摘要: 为解决基于UG(Unigraphics)的零件分布式设计的问题,分析比较了UG二次开发的两种模式,提出了一种基于零件库的通用参数化设计方法.采用COM(Component Object Model)方式建立了一个基于UG外部开发的通用参数化设计组件,利用DCOM(Distributed Component Object Model)实现了该组件的网络化,并在此基础上选用分布式三层网络模型,构建了一个基于COM/DCOM的分布式零件参数化设计系统,实现了LAN(Local Area Network)下对零件进行参数化设计的功能.

Abstract: To implement the distributed part design based on UG(Unigraphics), two application development modes of UG were compared, and a universal parametric design method on the basis of a part library was presented. Through UG external programming, and utilizing COM (component object model), a universal software component for part parametric design was written, and then with the help of DCOM (distributed component object model), the distributed design using this component was achieved. Finally, considering the 3-tier network model, a distributed part parametric design system integrating this component was developed, which implemented the parametric design in a LAN (local area network) environment.

中图分类号: 


版权所有 © 《北京航空航天大学学报》编辑部
通讯地址:北京市海淀区学院路37号 北京航空航天大学学报编辑部 邮编:100191 E-mail:jbuaa@buaa.edu.cn
本系统由北京玛格泰克科技发展有限公司设计开发